journal article·2015-10Open access

A probabilistic model for estimation of ionically permeable inhomogeneities in polymer coatings

Sina S. Jamali, Payam Mokhtarian, Douglas J. Mills

Abstract

The mechanism of ionic conduction through polymer coatings has been investigated. The presence of highly permeable areas in the coating (designated as D type areas), impose an electrochemical inhomogeneity which is identified by change in the ionic resistance as measured by DC method. The effect of coating thickness was studied on D type behaviour of coatings. A structural model is proposed to explain the changes in conduction mechanism by variation of coating thickness. Statistical models based on numerical (simulation-based) and analytical (probabilistic model) analysis of D type areas distribution have been advanced to estimate the number of D areas in any given coating based on the percentage of D type. Using these models the number of permeable (D type) areas can be estimated based on the D type percentage of the coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Electrochemical Analysis and Applications · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Electrolytic resistance in evaluating protective merit of coatings on metals10.1021/ie50457a041 ↗
2. A critical review of the protection of metals by paints10.1016/0010-938X(86)90120-4 ↗
3. Comparison of ENM, EIS and DC resistance for assessing and monitoring anti-corrosive coatings
4. The protective action of organic coatings on steel: a review
5. Ranking high-quality paint systems using EIS. Part I: Intact coatings10.1016/S0010-938X(02)00088-4 ↗
6. The mechanism of inhibition of the corrosion of iron and steel by means of paint
7. Ionic conduction in polymer films. II: Inhomogeneus structure of varnish films10.1002/pi.4980020407 ↗
8. Protective organic coatings: membrane properties and performance10.1016/0300-9440(82)80004-0 ↗
9. The delineation of ionic pathways in organic coatings using a molecular probe technique10.1016/S0300-9440(02)00196-0 ↗
10. The delineation of ionic pathways in epoxy coatings using molecular probes
11. Ionic conduction in polymer films. I: Influence of electrolyte on resistance10.1002/pi.4980010405 ↗
12. The effects of inhomogeneity in organic coatings on electrochemical measurements using a wire beam electrode, Part I10.1016/0033-0655(91)80013-9 ↗
13. The effects of inhomogeneity in organic coatings on electrochemical measurements using a wire beam electrode, Part II10.1016/0033-0655(91)80028-H ↗
14. The effect of the substrate on the electrical resistance of polymer films
15. The inhomogeneous nature of polymer films and its effect on resistance inhibition
16. The electrical properties of protective polymer coatings as related to corrosion of the substrate10.1149/1.2133017 ↗
17. Failure mechanisms for organic coatings subjected to 0.1M sulfuric acid10.1021/i300022a001 ↗
18. Mechanistic changes in cut-edge corrosion induced by variation of organic coating porosity10.1016/S0010-938X(01)00026-9 ↗
19. Localized electrochemical impedance spectroscopy for studying the degradation of organic coatings10.1016/S0013-4686(97)00180-1 ↗
20. In situ determination of the loss of adhesion of barrier epoxy coatings using electrochemical impedance spectroscopy10.1016/0033-0655(93)80006-V ↗
21. Application of impedance imaging to evaluation of organic coating degradation at a local scale
22. The crosslinking and adhesion to mild steel of epoxypolyamine films
23. Ionic conduction in polymer films. III: Influence of temperature on water absorption10.1002/pi.4980030107 ↗
24. Ionic conduction in polymer films. IV: The effect of pigmentation with iron oxide
25. Resistance measurements of organic coatings as a means for evaluating corrosion protection in acid solutions
26. Characterization of chemical heterogeneity in polymer systems using hydrolysis and tapping-mode atomic force microscopy10.1002/polb.1117 ↗
27. Characterization of the corrosion control properties of organic electrodeposition coatings
28. Inhomogeneities in organic coatings. A look at their importance to protection and at ways of detecting them
29. A study on the electrochemical inhomogeneity of organic coatings10.1016/0300-9440(95)00553-Q ↗
30. Mills · 1973
31. Understanding the inhomogeneous structure of organic coatings: causes and consequences on corrosion protection
32. The chemical basis of morphogenesis10.1098/rstb.1952.0012 ↗
33. The origin of life
34. Studying inhomogeneity of organic coatings using wire beam multielectrode and physicomechanical testing10.1179/1743278213Y.0000000114 ↗
35. The delineation of local water interaction with epoxy coatings using fluorescence microscopy10.1016/j.porgcoat.2005.05.006 ↗
36. Structural changes in polymer films. Part 1: The influence of the transition temperature on the electrolyte resistance and water uptake
37. Structural changes in polymer films. Part 2: The effect of the pigment zinc oxide on the electrolytic resistance and transition temperature; some comparisons with the pigments iron oxide and red lead
38. Electrolyte penetration through epoxy coatings electrodeposited on steel10.1016/0010-938X(94)00130-X ↗
39. The effects of different ionic migration on the performance of intact unpigmented epoxy coated mild steel under cathodic protection10.1016/j.porgcoat.2012.03.011 ↗
40. Cressie · 1993
41. Cressie · 2011
42. R. Core Team · 2015