The role of acetylacetone in alkaline surface modification bath of electro-galvanized steel to enhance protective functioning of a hybrid silane coating
Source abstract
Abstract
The current work outlines the impact of acetylacetone (AcAc) in the alkaline surface treatment bath on durability and the anti-corrosion properties of electro-galvanized steel (EGS) coated with a hybrid silane composition. The surface characteristics of the EGS samples before and after modifications were appraised using atomic force microscopy, field emission scanning electron microscopy, and contact angle measurements confirming the changes in roughness, morphology and wettability properties imposed by surface treatments. To elucidate the chemical composition of the protecting layer developed on the surface of EGS, X-ray photoelectron spectroscopy was utilized which evidently endorsed forming a film consisting of zinc hydroxide, zinc oxide, and zinc acetylacetonate. The corrosion resistance of the specimens during immersion in 3.5 % NaCl medium was determined using electrochemical impedance spectroscopy and polarization experiments. The low-frequency impedance (at 0.01 Hz) of silane-coated samples modified in the optimal condition (0.5 M NaOH bath) in the presence and absence of AcAc was respectively ca. 15,900, 5800 Ω·cm2. The electrochemical results corroborated the overriding role of a trace amount of AcAc in the corrosion protection of silane-coated EGS samples. The novel surface treatment proposed in this work provides improved corrosion protection of silane coating on EGS having the lowest icorr and presenting inhibition efficiency of 74 % in polarization experiment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Corrosion performance of a hot-dip galvanized steel treated by different kinds of conversion coatings10.1016/j.surfcoat.2010.08.028 ↗
2. Corrosion performance improvement of hot-dipped galvanized (HDG) steels by electro-deposition of epoxy-resin-ester modified bis-[tri-ethoxy-silyl] ethane (BTSE) coatings10.1016/j.porgcoat.2013.03.004 ↗
3. The use of pre-treatments based on doped silane solutions for improved corrosion resistance of galvanised steel substrates10.1016/j.surfcoat.2005.01.044 ↗
4. Quantitative depth-profiling with GDOS: application to ZnNi-electrogalvanized steel sheets10.1007/BF00322125 ↗
5. Forming characteristics and mechanical parameter sensitivity study on pre-phosphated electro-galvanized sheet steel10.1016/j.jmatprotec.2004.04.069 ↗
6. Post treatment of silane and cerium salt as chromate replacers on galvanized steel10.1016/S1002-0721(08)60213-6 ↗
7. Silane pre-treatments on copper and aluminium10.1016/j.electacta.2006.02.042 ↗
8. The synergistic combination of bis-silane and CeO2· ZrO2 nanoparticles on the electrochemical behaviour of galvanised steel in NaCl solutions10.1016/j.electacta.2008.03.069 ↗
9. Study of the degradation of hybrid sol–gel coatings in aqueous medium10.1016/j.porgcoat.2014.06.004 ↗
10. Electrochemical study of modified bis-[triethoxysilylpropyl] tetrasulfide silane films applied on the AZ31 mg alloy10.1016/j.electacta.2006.12.086 ↗
11. The corrosion resistance of hot dip galvanized steel pretreated with bis-functional silanes modified with microsilica10.1016/j.surfcoat.2004.11.012 ↗
12. Study of the effect of different aluminium surface pretreatments on the deposition of thin non-functional silane coatings10.1002/sia.1735 ↗
13. Effect of bath concentration and curing time on the structure of non-functional thin organosilane layers on aluminium10.1016/S0013-4686(02)00832-0 ↗
14. Silane sol–gel film as pretreatment for improvement of barrier properties and filiform corrosion resistance of 6016 aluminium alloy covered by cataphoretic coating10.1016/j.porgcoat.2011.07.012 ↗
15. Analytical characterization of silane films modified with cerium activated nanoparticles and its relation with the corrosion protection of galvanised steel substrates10.1016/j.porgcoat.2007.11.008 ↗
16. Chemical composition and corrosion protection of silane films modified with CeO2 nanoparticles10.1016/j.electacta.2009.01.053 ↗
17. Electrochemical investigation of high-performance silane sol–gel films containing clay nanoparticles10.1016/j.porgcoat.2010.04.007 ↗
18. Study of the effect of nanoclay incorporation on the rheological properties and corrosion protection by a silane layer10.1016/j.porgcoat.2010.11.022 ↗
19. Electrochemical study of modified non-functional bis-silane layers on Al alloy 2024–T310.1016/j.corsci.2008.01.018 ↗
20. Silanes and rare earth salts as chromate replacers for pre-treatments on galvanised steel10.1016/j.electacta.2004.01.051 ↗
21. Fabrication and characterization of layered double hydroxide/silane nanocomposite coatings for protection of mild steel10.1016/j.jtice.2017.08.015 ↗
22. Corrosion protection of steel with zinc phosphate conversion coating and post-treatment by hybrid organic-inorganic sol-gel based silane film10.1149/2.0491706jes ↗
23. Corrosion inhibition performance and healing ability of a hybrid silane coating in the presence of praseodymium (III) cations10.1149/2.0841811jes ↗
24. Assessment of the smart self-healing corrosion protection properties of a water-base hybrid organo-silane film combined with non-toxic organic/inorganic environmentally friendly corrosion inhibitors on mild steel10.1016/j.jclepro.2019.02.149 ↗
25. Electrochemical assessment of the self-healing properties of ce-doped silane solutions for the pre-treatment of galvanised steel substrates10.1016/j.porgcoat.2005.07.006 ↗
26. Improvement of corrosion protection offered to galvanized steel by incorporation of lanthanide modified nanoclays in silane layer10.1016/j.porgcoat.2011.12.001 ↗
27. Enhancement of anticorrosion property of 304 stainless steel using silane coatings10.1016/j.apsusc.2018.01.203 ↗
28. Corrosion protection and adhesion properties of the epoxy coating applied on the steel substrate pre-treated by a sol-gel based silane coating filled with amino and isocyanate silane functionalized graphene oxide nanosheets10.1016/j.apsusc.2017.12.240 ↗
29. Why some metals and alloys are more difficult to pretreat than others—part I10.1016/S0026-0576(02)80745-0 ↗
30. A surface study of the chemical pretreatment before coil coating of hot dip zinc-coated steel10.1002/sia.740190124 ↗
31. Evaluation of surface activity of hot-dip galvanized steel after alkaline cleaning10.1007/s11998-019-00272-9 ↗
32. Impact of alkaline and acid treatment on the surface chemistry of a hot-dip galvanized Zn–Al–Mg coating10.1016/j.jmrt.2020.11.070 ↗
33. Formation of composite coatings on galvanized steel from organosilane solutions using electrophoresis and sol-gel technology10.3390/ma15072418 ↗
34. Preparation and characterization of silanes films to protect electrogalvanized steel10.1007/s11665-018-3178-0 ↗
35. Corrosion protection properties of silane pre-treated powder coated galvanized steel10.1016/j.porgcoat.2009.06.011 ↗
36. Effect of chelating agent acetylacetone on corrosion protection properties of silane-zirconium sol–gel coatings10.1016/j.apsusc.2015.12.013 ↗
37. Enhancement of corrosion resistance of mild steel in NaCl solution with an eco-friendly silane coating containing nanoclay and zinc acetylacetonate10.1108/PRT-12-2017-0108 ↗
38. The influence of alkali-degreasing on the chemical composition of hot-dip galvanized steel surfaces10.1002/sia.2364 ↗
39. A highly efficient hydrogen generation electrolysis system using alkaline zinc hydroxide solution10.1016/j.ijhydene.2018.03.048 ↗
40. Theoretical design coupled with experimental study of the effectiveness of the inhibitive molecules based on Cynara scolymus L extract toward chloride-induced corrosion of steel10.1016/j.molliq.2021.115742 ↗
41. The effect of interlayer spacing on the inhibitor release capability of layered double hydroxide based nanocontainers10.1016/j.jclepro.2019.119676 ↗
42. A comparative study on corrosion inhibitive effect of nitrate and phosphate intercalated zn-Al-layered double hydroxides (LDHs) nanocontainers incorporated into a hybrid silane layer and their effect on cathodic delamination of epoxy topcoat10.1016/j.corsci.2016.12.001 ↗
43. Filler-matrix interaction in sodium montmorillonite-organosilica nanocomposite coatings for corrosion protection10.1016/j.clay.2017.09.016 ↗
44. Hydrolysis of α-chloro-substituted 2-and 4-pyridones: rate enhancement by zwitterionic structure10.1016/j.bmcl.2011.11.076 ↗
45. Screening the anti-corrosion effect of a hybrid pigment based on zinc acetyl acetonate on the corrosion protection performance of an epoxy-ester polymeric coating10.1016/j.jtice.2017.10.014 ↗
46. Corrosion of mild steel in hydrochloric acid solution in the presence of two cationic gemini surfactants with and without hydroxyl substituted spacers10.1016/j.corsci.2018.03.034 ↗
47. Tailoring hardness and electrochemical performance of TC4 coated Cu/aC thin coating with introducing second metal zr10.1016/j.corsci.2020.108713 ↗
48. Synthesis of hybrid organic–inorganic inhibitive pigment based on basil extract and zinc cation for application in protective construction coatings10.1016/j.conbuildmat.2021.123034 ↗
49. A tailored pulsed substrate bias voltage deposited (aC: Nb) thin-film coating on GTD-450 stainless steel: enhancing mechanical and corrosion protection characteristics10.1016/j.cej.2020.126490 ↗
50. Short-and long-term corrosion behavior of carbonate apatite-coated mg-4mass% Y-3mass% RE alloy in cell culture medium10.1016/j.corsci.2022.110222 ↗
51. Designing a non-hazardous nano-carrier based on graphene oxide@ polyaniline-praseodymium (III) for fabrication of the Active/Passive anti-corrosion coating10.1016/j.jhazmat.2020.123136 ↗
52. Graphene oxide nano-sheets loading with praseodymium cations: adsorption-desorption study, quantum mechanics calculations and dual active-barrier effect for smart coatings fabrication10.1016/j.jiec.2019.06.024 ↗
53. Corrosion mitigation of mild steel in hydrochloric acid solution using grape seed extract10.1038/s41598-021-97944-7 ↗
54. Review of zinc-based hybrid flow batteries: from fundamentals to applications10.1016/j.mtener.2017.12.012 ↗
55. Synthesis of green rusts by oxidation of Fe (OH) 2, their products of oxidation and reduction of ferric oxyhydroxides; Eh–pH pourbaix diagrams10.1016/j.crte.2006.04.004 ↗
56. Moeller · 2012
57. Smith · 2010
58. A highly-effective/durable metal-organic anti-corrosion film deposition on mild steel utilizing Malva sylvestris (MS) phytoextract-divalent zinc cations10.1016/j.jiec.2021.01.002 ↗
59. Synthesis of a multi-functional zinc-centered nitrogen-rich graphene-like thin film from natural sources on the steel surface for achieving superior anti-corrosion properties10.1016/j.corsci.2020.109077 ↗
60. Investigation of the ability of the corrosion protection of zn-mg coatings10.2174/1876503300902010026 ↗
61. Electrochemical impedance spectroscopic investigation of the role of alkaline pre-treatment in corrosion resistance of a silane coating on magnesium alloy, ZE4110.1016/j.electacta.2011.02.050 ↗
62. Palomino · 2007
63. The electrochemical behavior of doped silane pre-treatments on galvanized steel substrates10.1142/S0218625X17500159 ↗