Effect of metering systems and drying methods on the barrier properties of paper coated with multiple layers of cellulose nanofibres
Source abstract
Abstract
Developing environmentally friendly barrier coatings as an alternative to petroleum-based polymer packaging is a challenge. Cellulose nanofibres (CNF) films have exhibited great potential as water and gas barrier layers. Recycled paper was multi-layer coated with three commercial CNF (mechanical (M-CNF), TEMPO (T-CNF) and carboxymethylated (C-CNF)) using two metering systems (wound rod and blade micrometer) and two drying methods (tension-free contact drying and air drying). The coatability and rheological behaviour of the CNF suspensions were analysed. The gas, water and grease barrier properties of the CNF coated papers were determined and compared with the results of paper coated with cationic starch. The three CNF suspensions and the starch suspension were successfully coated using both metering systems. In the multi-layer coating, air drying yielded higher coat weights than contact drying, and the difference was more noticeable in M-CNF and T-CNF coated samples. A lack of uniformity observed in CNF coatings increased with the number of coating layers. M-CNF coated samples had a whitish surface with a uniform appearance, but coating was insufficiently compact to provide barrier properties. T-CNF coating exhibited a cracked surface and consequently provided no barrier properties. Drying stresses caused breakage of T-CNF coating, which could be explained by the drop in apparent viscosity at much lower rheological shear stresses in the T-CNF suspension. C-CNF showed successful coatability and provided barrier properties to paper with both metering systems and drying methods. Air permeance decreased considerably and the water wettability of the paper decreased by 60% compared to the reference paper, even with a single coating layer (about 1 g·m-2). In addition, a greaseproof paper (grease resistance >1800 s and kit no >10) was obtained with multi-layer C-CNF coating. Although water vapour permeability at 90 % RH and 20 °C decreased slightly with a single layer of CNF coating, higher amounts of CNF did not improve this parameter
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Material Properties and Processing · Nanocomposite Films for Food Packaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Food plastic packaging transition towards circular bioeconomy: a systematic review of literature
2. Technical limits in circularity for plastic packages
3. Microplastics in seafood and the implications for human health10.1007/s40572-018-0206-z ↗
4. A review on European Union’s strategy for plastics in a circular economy and its impact on food safety10.1016/j.jclepro.2020.125263 ↗
5. Bio-based coatings for paper applications10.3390/coatings5040887 ↗
6. Bio-based polymers for sustainable packaging and biobarriers: a critical review10.15376/biores.14.2.Helanto ↗
7. A review of cellulose and its derivatives in biopolymer-based for food packaging application10.1016/j.tifs.2021.04.016 ↗
8. Characterization of purified bacterial cellulose focused on its use on paper restoration10.1016/j.carbpol.2014.03.064 ↗
9. Nanocellulose in thin films
10. Dynamically crosslinked chitosan/cellulose nanofiber-based films integrated with γ-cyclodextrin/curcumin inclusion complex as multifunctional packaging materials for perishable fruit10.1016/j.foodhyd.2023.108996 ↗
11. Cellulose nanofibrils/polydimethyl- siloxane double-layer coating for fabrication of high barrier and excellent water- and oil-resistance paper
12. Use of bacterial cellulose in degraded paper restoration
13. Use of bacterial cellulose in degraded paper restoration
14. Oxygen and oil barrier properties of microfibrillated cellulose films and coatings10.1007/s10570-009-9393-y ↗
15. Cellulose nanofibril coatabilty10.15376/biores.12.4.7656-7679 ↗
16. Barrier coatings with various types of cellulose nanofibrils and their barrier properties10.1007/s10570-020-03061-5 ↗
17. Structural properties of coated papers with cellulosic nanofibres using different metering systems and drying technologies
18. Improving water vapor barrier of cellulose based food packaging using double layer coatings and cellulose nanofibers10.1016/j.fpsl.2022.100895 ↗
19. Properties of nanocelluloses and their application as rheology modifier in paper coating10.1021/acs.iecr.7b01804 ↗
20. Rheology of nanofibrillated cellulose/acrylate systems for coating applications10.1007/s10570-014-0248-9 ↗
21. Tuning rheology and aggregation behaviour of TEMPO-oxidised cellulose nanofibrils aqueous suspensions by addition of different acids10.1016/j.carbpol.2020.116109 ↗
22. Microfibrillated cellulose - its barrier properties and applications in cellulosic materials: a review10.1016/j.carbpol.2012.05.026 ↗
23. Rheological properties of nanocellulose suspensions: effects of fibril/particle dimensions and surface characteristics10.1007/s10570-017-1283-0 ↗
24. Rapid cellulose nanomaterial characterisation by rheology10.1007/s10570-023-05180-1 ↗
25. Impact of different coating processes of microfibrillated cellulose on the mechanical and barrier properties of paper10.1007/s10853-013-7995-0 ↗
26. Cellulose nanofibils as coating material and its effects on paper properties10.1016/j.porgcoat.2016.09.018 ↗
27. Application of cellulose nanofibril (CNF) as coating on paperboard at moderate solids content and high coating speed using blade coater10.1016/j.porgcoat.2018.05.024 ↗
28. Viability and properties of roll-to-roll coating of cellulose nanofibrils on recycled paperboard
29. Mechanical and barrier properties of cardboard and 3D packaging coated with microfibrillated cellulose10.1002/app.40106 ↗
30. Constructing NFC-pigment composite surface treatment for enhanced paper stiffness and surface properties10.1007/s10570-011-9634-8 ↗
31. Roll-to-roll processed cellulose nanofiber coatings10.1021/acs.iecr.6b00417 ↗
32. Effect of paper surface properties on coated paper wettability with different fountain solutions10.15376/biores.9.3.4226-4241 ↗
33. Rheological properties of starch suspensions using a rotational rheometer fitted with a starch stirrer cell10.1007/s00397-013-0754-y ↗
34. Enzymatically pretreated high-solid-content nanocellulose for a high-throughput coating process10.1021/acsanm.2c02423 ↗
35. Moisture and oxygen barrier properties of cellulose nanomaterial-based films10.1021/acssuschemeng.7b03523 ↗
36. Water vapor transport properties of regenerated cellulose and nanofibrillated cellulose films10.1016/j.memsci.2015.06.009 ↗
37. Comparison of nano- and microfibrillated cellulose films10.1007/s10570-014-0357-5 ↗
38. H. Fukuzumi, T. Saito, A. Isogai, Influence of TEMPO-oxidized cellulose nanofibril length on film properties, in: Carbohydr Polym, 2013 172–177. doi:https://doi.org/10.1016/j.carbpol.2012.04.069.10.1016/j.carbpol.2012.04.069 ↗
39. Multilayered alkyd resin/nanocellulose coatings for use in renewable packaging solutions with a high level of moisture resistance10.1021/ie301785a ↗
40. Physical and chemical modifications of cellulose fibers for food packaging applications10.1007/s10570-021-04086-0 ↗
41. The formation and characterization of sustainable layered films incorporating microfibrillated cellulose (MFC)10.15376/biores.7.3.3690-3700 ↗
42. Review on hygroscopic aging of cellulose fibres and their biocomposites10.1016/j.carbpol.2015.06.027 ↗
43. Nanocellulose in packaging: advances in barrier layer technologies10.1016/j.indcrop.2016.11.012 ↗
44. Q. Tarrés, H. Oliver-Ortega, P.J. Ferreira, M. Àngels Pèlach, P. Mutjé, M. Delgado-Aguilar, Towards a new generation of functional fiber-based packaging: cellulose nanofibers for improved barrier, mechanical and surface properties, Cellulose 25 (2018) 683–695. doi:10. 1007/s10570–017–1572-7.10.1007/s10570-017-1572-7 ↗
45. Oil-and water-resistant coatings for porous cellulosic substrates10.1021/acsapm.8b00106 ↗
46. A closed-loop and sustainable approach for the fabrication of plastic-free oil- and water-resistant paper products10.1039/C9GC01865D ↗