journal article·2023-09Open access

Polyester–melamine coil coating formulation reinforced with surface-modified cellulose nanofibrils

Maria Rosella Telaretti Leggieri, Tomas Deltin, Alexander Wärnheim, Per-Erik Sundell, Eva Malmström, Mats Johansson

Abstract

In light of the need to redesign industrially produced materials by utilizing renewable resources, nanoscopic forms of cellulose are regarded as a valuable asset. In this work, the potential of cellulose nanofibrils (CNFs) as an unconventional nanoadditive for a polyester–melamine coil coating formulation is explored. CNFs, hydrophilic nanomaterials with high aspect ratios, were successfully incorporated in the solvent-borne formulation. Coatings were prepared with extremely low loadings of the nanoadditive (0.5 and 0.7 wt%). At these concentrations, the volume fraction of the nanofibrils in the coatings was calculated to be close to their percolation threshold. Two different pathways of CNF surface modification were applied to allow for a good compatibilization in the resin matrix, and the formulations were cured in two different settings. The effective compatibilization of the nanoadditive led to a significant variation of the viscoelastic properties in the coatings containing CNFs. The results from dynamic mechanical analysis (DMA) highlighted the effect of CNFs on the crosslinked network at the nanoscale, resulting in an increase in Tg. Additionally, an increase in the stress at break and Young's modulus was determined by tensile testing, while satisfactory elongation at break was preserved. Other relevant effects induced by the presence of CNFs on the properties of the coatings were highlighted, such as a significant matt effect, increased surface roughness and lower scratch resistance. A preliminary evaluation of the water barrier properties by electrochemical impedance spectroscopy (EIS) is also presented, suggesting that the incorporation of a hydrophilic nanoadditive did not lead to a deterioration of the coatings' performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Advanced Data Storage Technologies · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Application and applications
2. Polyester resins
3. Johansson · 2008
4. A model study on fatty acid methyl esters as reactive diluents in thermally cured coil coating systems10.1016/j.porgcoat.2006.02.002 ↗
5. The effect of fatty acid methyl esters on the curing performance and final properties of thermally cured solvent-borne coil coatings10.1016/j.porgcoat.2007.02.004 ↗
6. Fatty acid methyl ester as reactive diluent in thermally cured solvent-borne coil-coatings - the effect of fatty acid pattern on the curing performance and final properties10.1016/j.porgcoat.2008.05.003 ↗
7. Novel coil coating systems using fatty acid based reactive diluents10.1016/j.porgcoat.2010.11.018 ↗
8. Bio-based multifunctional fatty acid methyl esters as reactive diluents in coil coatings
9. M.K.G. Johansson M. Svensson P.-E. Sundell Method for production of thermally cured coatings WO2005052070A1 2005.
10. Cellulose: fascinating biopolymer and sustainable raw material10.1002/anie.200460587 ↗
11. Recent developments in cellulose nanomaterial composites10.1002/adma.202000718 ↗
12. Fundamentals of cellulose lightweight materials: bio-based assemblies with tailored properties10.1039/D1GC00326G ↗
13. Developing fibrillated cellulose as a sustainable technological material10.1038/s41586-020-03167-7 ↗
14. Fundamentals and analytical methods
15. Dufresne · 2017
16. Production of cellulose nanofibrils: a review of recent advances10.1016/j.indcrop.2016.02.016 ↗
17. A physical cross-linking process of cellulose nanofibril gels with shear-controlled fibril orientation10.1039/C2SM27223G ↗
18. Recent developments on nanocellulose reinforced polymer nanocomposites: a review10.1016/j.polymer.2017.09.043 ↗
19. Cellulose nanomaterials as green nanoreinforcements for polymer nanocomposites10.1098/rsta.2017.0040 ↗
20. Key advances in the chemical modification of nanocelluloses10.1039/C3CS60204D ↗
21. Drying cellulose nanofibrils: in search of a suitable method10.1007/s10570-011-9630-z ↗
22. Cellulose nanomaterial reinforced polymer nanocomposites10.1016/j.cocis.2017.01.004 ↗
23. Strategy for the improvement of the mechanical properties of cellulose nanofiber-reinforced high-density polyethylene nanocomposites using diblock copolymer dispersants10.1021/acsami.7b13963 ↗
24. Polycaprolactone nanocomposites reinforced with cellulose nanocrystals surface-modified via covalent grafting or physisorption: a comparative study10.1021/acsami.7b09009 ↗
25. Exploiting poly(ɛ-caprolactone) and cellulose nanofibrils modified with latex nanoparticles for the development of biodegradable nanocomposites10.1002/pc.24865 ↗
26. Improved cellulose nanofibril dispersion in melt-processed polycaprolactone nanocomposites by a latex-mediated interphase and wet feeding as LDPE alternative10.1021/acsanm.8b00376 ↗
27. Modification of cellulose model surfaces by cationic polymer latexes prepared by RAFT-mediated surfactant-free emulsion polymerization10.1039/C4PY00675E ↗
28. Soft and rigid core latex nanoparticles prepared by RAFT-mediated surfactant-free emulsion polymerization for cellulose modification - a comparative study10.1039/C6PY01904H ↗
29. Nanolatex architectonics: influence of cationic charge density and size on their adsorption onto surfaces with a 2D or 3D distribution of anionic groups10.1016/j.jcis.2022.12.038 ↗
30. One-pot water-based hydrophobic surface modification of cellulose nanocrystals using plant polyphenols10.1021/acssuschemeng.7b00415 ↗
31. Bio-inspired hydrophobic modification of cellulose nanocrystals with castor oil10.1016/j.carbpol.2018.03.012 ↗
32. One-step superhydrophobic coating using hydrophobized cellulose nanofibrils10.1016/j.colsurfa.2017.12.059 ↗
33. Green process for chemical functionalization of nanocellulose with carboxylic acids10.1021/bm5013458 ↗
34. Chemical modification of nanocellulose with canola oil fatty acid methyl ester10.1016/j.carbpol.2017.04.008 ↗
35. Designing cellulose nanofiber surface for high density polyethylene reinforcement10.1007/s10570-018-1787-2 ↗
36. Use of cellulose nanofibrils (CNF) in coating colors10.3183/npprj-2015-30-03-p511-518 ↗
37. Surface hydrophobization of TEMPO-oxidized cellulose nanofibrils (CNFs) using a facile, aqueous modification process and its effect on properties of epoxy nanocomposites10.1007/s10570-019-02762-w ↗
38. Comparative study of CNC and CNF as additives in waterborne acrylate-based anti-corrosion coatings
39. Individualization of nano-sized plant cellulose fibrils by direct surface carboxylation using TEMPO catalyst under neutral conditions10.1021/bm900414t ↗
40. Insights into the EDC-mediated PEGylation of cellulose nanofibrils and their colloidal stability10.1016/j.carbpol.2017.11.065 ↗
41. PDMAEMA from α to ω chain ends: tools for elucidating the structure of poly(2-(dimethylamino)ethyl methacrylate)10.1039/D2PY01604D ↗
42. The effect of the dispersion of microfibrillated cellulose on the mechanical properties of melt-compounded polypropylene–polyethylene copolymer10.1007/s10570-019-02756-8 ↗
43. 2014
44. 2021
45. 1992
46. 2021
47. Nanocomposite materials from latex and cellulose whiskers10.1002/pat.1995.220060514 ↗
48. Correlation between stiffness of sheets prepared from cellulose whiskers and nanoparticles dimensions10.1016/j.carbpol.2010.11.022 ↗
49. Cellulosic bionanocomposites: a review of preparation, properties and applications10.3390/polym2040728 ↗
50. Formation of colloidal nanocellulose glasses and gels10.1021/acs.langmuir.7b01832 ↗
51. TEMPO-oxidized cellulose nanofibrils dispersed in organic solvents10.1021/bm101255x ↗
52. Derivation and synthesis of renewable surfactants10.1039/C1CS15217C ↗
53. Vibrational analysis of some important group frequencies of melamine derivatives containing methoxymethyl, and carbamate substituents: mechanical coupling of substituent vibrations with triazine ring modes10.1016/S0924-2031(98)00015-0 ↗
54. Hazy transparent cellulose nanopaper10.1038/srep41590 ↗
55. Cellulose and potential reinforcement
56. Effect of solvent exchange on the solid structure and dissolution behavior of cellulose10.1021/bm034065g ↗
57. Comparative study of CNC and CNF as additives in waterborne acrylate-based anti-corrosion coatings10.1080/01932691.2019.1647229 ↗
58. Ranking high-quality paint systems using EIS. Part 1: intact coatings10.1016/S0010-938X(02)00088-4 ↗