journal article·2020-09

Thermodynamic Modeling of Chemical and Phase Transformations in a Waelz Process-Slag – Carbon System

A. S. Kolesnikov, G. S. Kenzhibaeva, N. E. Botabaev, A. N. Kutzhanova, G. M. Iztleuov, A. Zh. Suigenbaeva, Kh. A. Ashirbekov, O. G. Kolesnikova

Publisher page

Abstract

Chemical and phase transformations in aWaelz process-slag – carbon system in the range 1700 – 2100 K at a pressure of 0.1 MPa are modeled. It is established that the maximum degree of iron transferred into condensed Fe3 Si is from 34.7 % at 1800 K to 99.9 % at 2100 K, and into Fe5Si3 from 47.7% at 1900 K to 45.6% at 2000 K. With a further increase in temperature iron starts to be transferred into the gas phase. Silicon, in comparison with iron, is more difficult to recover and with an increase in temperature starts to pass into the gas phase. The degree of nonferrous metal Zn, Cd and Pb transfer into the gas phase is 99.99 % over the whole temperature range. Modeling makes it possible to analyze the possibility of obtaining ferrosilicon from technogenic non-ferrous metallurgy waste by electric melting in an electric arc furnace.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Extraction and Bioleaching · Railway Systems and Materials Science · Iron and Steelmaking Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. V. A. Reznichenko, M. S. Lipikhina, A. A. Morozov, et al., Comprehensive Sue of Ore and Concentrates [in Russian], Nauka, Moscow (1989).
2. Z. F. Gel’manova and D. M. Zhaksybaev, “Features of formation and utilization of secondary resources in metallurgical production,” Mezhd. Prikl. Fundament. Issled., No. 7, Part 5, 749 – 753 (2016). https://applied/research/ru/rularticle/view?id=9954 (access date: 23.01.2020).
3. L. L. Aksenova and L. V. Khlebenskikh, “Utilization of ferrous and nonferrous enterprise waste in the building industry,” Engineering science in Russian and abroad: Mat. of the 3rd Internat. Sci. Conf. (Moscow, July 2014). Buki-Vedi, Moscow (2014). URL https:/l moluch.ru/confltech/archive/9015669 (access date: 23.01.2020).
4. B. K. Kenzhaliev, “Concept of development of rational utilization of mineral technogenic raw material and secondary metals for organizing production of the 4-th and 5-th conversions in the metallurgical complex of the Kazajhstan Republic,” Kompleks. Ispol. Mineral Syr’ya, No. 6, 117 – 113 (2001).
5. G. V. Mannova, Engineering and Technology of Solid Waste Utilization [in Russian], Znanie, Moscow (2007).
6. L. L. Aksenova and L. V. Khlebenskikh, “Utilization of ferrous metallurgy and nonferrous metallurgy enterprise waste in the building industry, Engineering science in Russian and abroad: Mat. of the 3rd Internat. Sci. Conf. (Moscow, July 2014). Buki-Vedi, Moscow (2014). URL https:/l moluch.ru/confltech/archive/90/5669 (access date: 23.01.2020).
7. A. K. Kozhakhan and Sh. M. Umbetova, “Scientific and technological analysis of secondary treatment of technogenic wastes of the power generation and mining and chemical industries,” Molodoi Uchenyi, No. 12, 54047 (2009). URL https://moluch.ru/archive/2/898 (access date: 23.01.2020).
8. V. N. Knyaginina, New technological revolution: Challenges and Possibilities for Russia: Expert analytical paper [in Russian], TsSR, Moscow (2017).
9. V. A. Chantiriya, I. V. Shadrunova, and O. E. Gorlova, “Innovative processes of thorough and comprehensive treatment of technogenic raw material under new economic challenge conditions,” Internat. Sci.-Pract. Conf. “Effective technology for producing nonferrous, rare, and precious metals,” IMio, Almaty (2018). DOI: 10.31643/2018-7.45.10.31643/2018-7.45 ↗
10. V. A. Chanturiya, “Contemporary state and main scientific directions in the field of economic mineral enrichment,” Contemporary processes for comprehensive and thorough treatment of mineral raw materials that are difficult to treat, Internat. Meeting (Plaksinsk papers – 2015), Irkutsk (2015).
11. A. S. Kolesnikov, “Kinetic investigations into the distillation of nonferrous metals during complex processing of waste of metallurgical industry,” Russian Journal of Non-Ferrous Metals, 56(1), 1 – 5 (2015). DOI: https://doi.org/10.3103/Sl067821215010113.10.3103/Sl067821215010113 ↗
12. A. K. Nurumgaliev, A. A. Amenova, G. E. Akhmetova, and U. A. Saduakas, “Properties of steel reduced by means of ferrosilicoalumobarium,” Steel in Translation, No. 47, 618 – 622 (2017). DOI: https://doi.org/10.3103/S09670912709018.10.3103/S09670912709018 ↗
13. B. N. Satbaev, A. I. Koketaev, E. O. Aimbetovo, et al., “Environmental technology for the integrated disposal of man-made wastes of the metallurgical industry: self-curing, chemically resistant refractory mass,” Refract. Ind. Ceram., 60(3), 318 – 322 (2019). DOI: https://doi.org/10.1007/s11148019-00360-8.10.1007/s11148019-00360-8. ↗
14. E. S. Abdrakhimova, “Study of acid-resistant material properties based on non-ferrous metallurgy waste using regression analysis,” Refract. Ind. Ceram., 56(5), 510 – 516 (2016), DOI: https://doi.org/10.1007/s11148-016-9878-9.10.1007/s11148-016-9878-9 ↗
15. Wellington L. Ferreira, Erica L. Reis, and Rosa M. F. Lima “Incorporation of residues from the minero-metallurgical industry in the production of clay-lime brick,” Journal of Cleaner Production, 87, 505 – 510 (2015). DOI: https://doi.org/10.1016/j.jclepro.2014.09.013.10.1016/j.jclepro.2014.09.013 ↗
16. Ilutrlu-Vantara, Dana-Ailrlana “ Researching the hazardous potential of metallurgical solid wastes,” Pol. J. Environ. Stud., 25(1), 147 – 152 (2016). DOI: https://doi.org/10.15244/pjoes/60178.10.15244/pjoes/60178. ↗
17. Zhiwei Peng, Dean Gregurek, Christine Wenzl, and Jesse F. White, “Slag metallurgy and metallurgical waste recycling,” JOM, 68(9), 2313 – 2315 (2016). DOI: https://doi.org/10.1007/s11837-016-2047-2.10.1007/s11837-016-2047-2 ↗
18. L. B. Khoroshavin, V. A. Perepelitsyn, and D. K. Kochkin, “Problems of technogenic resources,” Refract. Ind. Ceram., 39(9/10), 366 – 368 (1998). DOI: https://doi.org/10.1007/8F02770604.10.1007/8F02770604 ↗
19. V/G. Trusiv, “Thermodynamic method for analyzing high-temperature condition and processes of its practical implementation,” Diss. Doct. Techn. Sci., MGTU, Moscow (1984).
20. A. S. Kolesnikov, LV. Sergeeva, N. E. Botabaev, et al., “Chemical and phase transitions in oxidized manganese ore in the presence of carbon,” Steel in Translation, 47(9) 605 – 609 (2017). DOI: https://doi.org/10.3103/S0967091217090078.10.3103/S0967091217090078 ↗
21. N. A. Vatolin, G. K. Moiseev, and B. G. Trusiv, Thermodynamic Modeling in High-Temperature Inorganic Systems [in Russian], Metallurgiya, Moscow (1994).
22. G. V. Belov, Thermodynamic Modeling: Methods, Algorithms, Programs [in Russian], Nauchnyi Mir, Moscow (2002).
23. G. K. Moiseev, N. A. Vatolin, L. A. Marshuj, and N. I. Il’inykh, Temperature Dependence of Derived Gibbs Energy for Some Inorganic Substances [in Russian], Inst. Metall. UrO RAN, Ekaterinberg (1997).
24. K. S. Nadirov, M. K. Zhantasov, G. Zh. Bimbetova, et al., “Examination of optimal parameters of oxy-ethylation of fatty acids with a view to obtaining demulsifiers for deliquefaction in the system of skimming and treatment of oil a method to obtain demulsifier from fatty acids,” Chimica oggi., 34(1), 72 – 77 (2016).
25. K. S. Nodirov, M. K. Zhantasov, B. A. Sokybayev, et al, “The study of the gossypol resin impact on adhesive properties of the intermediate layer of the pipeline three-layer rust protection coating,” Int. J. Adhes. Adhes., 78, 195 – 199 (2017). DOI: https://doi.org/10.1016/j.ijadhadh.2017.07.001.10.1016/j.ijadhadh.2017.07.001 ↗
26. P. Bondarenko, K. S. Nodirov, and V. G. Golubev, “Study of a reagent-emulsifier for the preparation of reverse water-oil emulsions used for well-killing” [In Russian] Neftyanoe Khozyaystvo — Oil Industry, No. 1, 58 – 60 (2017). OIJ-2017-01-058-060-RU.
27. B. T. Taimasov, B. K. Sarsenbayev, T. M. Khudyaftova, et al., “Development and testing of low energy-intensive technology of receiving sulphate-resistant and road Portland cement,” Eurasian Chem. Tech. J., 19(4), 347 – 355 (2017). DOI: https://doi.org/10.18321/ectj683.10.18321/ectj683 ↗
28. N. N. Zhanikulov. T. M. Khudyakovo, B. T. Taimasov, et al., “Receiving Portland cement from technogenic raw materials of South Kazakhstan Portland cement,” Eurasian Chem. Tech. J., 21(4), 334 – 340 (2019). DOI: https://doi.org/10.18321/ectj890.10.18321/ectj890 ↗
29. T. M. Khudyakova, A. S. Kolesnikov, B. E. Zhakipbaev, et al., “Optimization of raw material mixes in studying mixed cements and their physicomechanical properties,” Refract. Ind. Ceram., 60(1), 76 – 81 (2019). DOI: 10.10071s11148-01900312-2.