journal article·2019-11

Properties of Ceramics Based on Al2o3 with Admixture of Unltradispersed Powder of Al2o3 Synthesized by the Electrochemical Method

Yu. I. Komolikov, I. D. Kashcheev, K. G. Zemlyanoi, V. I. Pudov

Publisher page

Abstract

We present the results of investigation of the regularities of sintering and properties of corundum ceramics based on alumina with admixtures of ultradispersed powder of Al2O3(Al2O3 UDP) synthesized by the electrochemical method. It is shown that, as the firting temperature and the concentration of Al2O3 UDP increases, we observe a regular elevation of the linear shrinkage, microhardness, and ultimate strength in bending of the ceramics (the maximum values attained at 1550°C are as follows: 27.8%, 17 GPa, and 340 MPa, respectively). The introduction of Al2O3 UDP makes it possible to get an apparent density of the ceramics equal to 3.87 g/cm3 even at 1550°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. D. N. Poluboyarinov, Ceramics Made of Highly Refractory Oxides [in Russian], Metallurgiya, Moscow (1977).
2. N. M. Pavlushkin, Sintered Corundum [in Russian], Stroiizdat, Moscow (1961).
3. V. L. Balkevich, Technical Ceramics [in Russian], Stroiizdat, Moscow (1984).
4. V. V. Smirnov and I. V. Sinitsa, “Corundum ceramics with a low sintering temperature,” Refractories, 35(10), 322–324 (1994).10.1007/BF02226443 ↗
5. E. S. Lukin, “Modern high-density oxide ceramics with controlled microstructure. Part 1. Effect of aggregation of oxide powders on the sintering and microstructure of ceramics,” Refract. Ind. Ceram., 37(1), 6–14 (1996)10.1007/BF02230457 ↗
6. E. S. Lukin, “Modern high-density oxide ceramics with controlled microstructure. Part 2. Substantiation of the choice of modifying additives that affect the degree of sintering of oxide ceramics,” Refract. Ind. Ceram., 37(4), 109–119 (1996).10.1007/BF02238719 ↗
7. Å. S. Lukin, N. À. Makarov, N. À. Popova, et al., “New types of corundum ceramics with admixtures of eutectic compositions,” Konstrukts. Mater., No. 3, 5–10 (2001).
8. Y. F. Hsu, S. F. Wang, and T.W. Cheng, “Effects of additives on the densification and microstructural evolution of fine Al2O3 powder,” Mater. Sci. Eng., 362, 300–308 (2003).10.1016/S0921-5093(03)00614-2 ↗
9. M. Sathiyakuman and F. B. Gnanam, “Influence of additives on density, microstructure and mechanical properties of alumina,” J. Mater. Process. Technol., 133, 282–286 (2003).10.1016/S0924-0136(02)00956-1 ↗
10. V. I. Vereshchagin, P. M. Pletnev, À. P. Surzhikov, and V. E. Fedorov, Functional Ceramics [in Russian], Nauka, Novosibirsk (2004).
11. V. A. Lotov and A. T. Dobrolyubov, “Kinetics of sintering of corundum ceramics with microadditives,” Steklo Keram., No. 11, 10–12 (1997).
12. W. Zeng, L. Gao, L. Gui, and J. Guo, “Sintering kinetics of Al2O3 powder,” Ceram. Int., 25, 723–726 (1999).10.1016/S0272-8842(99)00008-5 ↗