journal article·2022-05

Test for stress relief cracking susceptibility in creep resistant chromium-molybdenum steels

Conner Sarich, Boian Alexandrov, Avraham Benatar, Jorge Penso

Publisher page

Abstract

An externally restrained stress relief cracking test was developed and demonstrated in testing susceptible and resistant to cracking welds in Cr–Mo steels. Compared to other externally restrained tests, it simultaneously applies stress and compensates thermal expansion during heating to post-weld heat treatment temperature and utilises digital image correlation for quantification of key characteristics of the stress relaxation and stress relief cracking phenomena. In contrast with resistant to stress relief cracking materials, susceptible materials experienced lower levels of stress relaxation, strain absorption, and sustained mechanical energy, with accelerated kinetics of strain accumulation and strain localisation leading to failure. The processes of stress relief cracking and stress relaxation were quantified as low strain – slow strain rate – low energy phenomena.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Welding Engineering Program, Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, USA

Shell Global Solutions US Inc., Houston, TX, USA

Funding

Shell Global Solutions · Lincoln Electric · NSF Manufacturing and Materials Joining Innovation Center (Ma2JIC · )

References (27)

Show source-provided references
1. Nakamura H, Naiki T, Okabayashi H. Fracture in the process of stress-relaxation under constant strain. 1st International Conference on Fracture, September 1965, Sendai, Japan, Vol. 2; 1965 p. 863–878.
2. Lundin CD, Liu P, Qiao C Y.P, An experimental study of causes and repair of cracking of 1.25Cr- 0.5Mo steel equipment. Welding Research Council, Bulletin No. 411; 1996.
3. Nawrocki JG · Weld J · 2003 · 82 · 25s
4. 10.1016/0001-6160(84)90100-710.1016/0001-6160(84)90100-7 ↗
5. Lundin CD, Khan KK. Fundamental studies of the metallurgical causes and mitigation of reheat cracking in 1 1 /4 Cr - 1 /2 Mo and 2 1 / 4 Cr-1Mo steels. Welding Research Council, Bulletin No. 409; 1996.
6. 10.1016/j.msea.2012.09.00710.1016/j.msea.2012.09.007 ↗
7. Trent MC. Development and use of a simple test method to evaluate reheat cracking sensitivity in the weld deposit region of a submerged arc weld [MSc thesis]. University of Tennessee, Knoxville; 2012.
8. 10.1016/0025-5416(79)90083-110.1016/0025-5416(79)90083-1 ↗
9. 10.1007/BF0326649210.1007/BF03266492 ↗
10. API 934-A. Materials and fabrication of 2 1/4Cr-1Mo, 2 1/4Cr-1Mo-1/4 V, 3Cr-1Mo, and 3Cr-1Mo-1/4 V steel heavy wall pressure vessels for high-temperature, high pressure hydrogen service. API Recommended Practice, Second Edition; 2008.
11. Nawrocki JG · Weld J · 2000 · 79 · 355s
12. 10.1007/978-3-319-28434-7_2110.1007/978-3-319-28434-7_21 ↗
13. 10.29391/2019.98.00310.29391/2019.98.003 ↗
14. Sarich C. Stress relief cracking in low alloy creep resistant steels [PhD dissertation]. The Ohio State University; 2021.
15. 10.1115/1.326436210.1115/1.3264362 ↗
16. 10.29391/2021.100.00310.29391/2021.100.003 ↗
17. 10.1115/PVP2009-7814410.1115/PVP2009-78144 ↗
18. Pillot S, Chauvy C. Standard Reliable Testing Procedure for 21/4Cr-1Mo-V Welding Quality Control & Acceptance – Prevention of SAW Filler Material Reheat Cracking during Fabrication of Heavy Reactors. 2012 ASME Pressure Vessel and Piping Conference. PVP Paper 2012-78030; 2012.
19. 10.1007/s40194-020-00881-810.1007/s40194-020-00881-8 ↗
20. Glossop BA · Metal Constr Br Weld J · 1969 · 1969 · 68
21. Ghiya SP, Bhatt DV, Rao RV. Stress relief cracking in advanced steel material overview. Proceedings of the World Congress on Engineering, 2009, Vol. 2; 2009.
22. Maitzner CF. Stress relief cracking in weldments. Welding Research Council, Bulletin No. 211; 1975.
23. 10.1533/978184569401210.1533/9781845694012 ↗
24. 10.1016/0001-6160(72)90082-X10.1016/0001-6160(72)90082-X ↗
25. 10.1016/j.ijpvp.2014.06.00210.1016/j.ijpvp.2014.06.002 ↗
26. Tamaki K. · Trans Jpn Weld Soc · 1984 · 15 · 8
27. 10.1007/978-3-319-28434-7_1210.1007/978-3-319-28434-7_12 ↗