journal article·2003-02

Evaluation of effects of niobium and manganese addition on nickel base weldments

T.-Y. Kuo, H.-T. Lee, C.-C. Tu

Publisher page

Abstract

The present work investigates the influence of different concentrations of Nb (from 0.1 to 3.35 wt-%) or Mn (from 0.78 to 3.32 wt-%) on the microstructure and mechanical properties of an Inconel 690 weldment. Welding electrodes are produced by coating Inconel filler metal 52 with a flux containing various percentages of Nb or Mn. Weldments with a bevel edge are butt welded via a manual shielded metal arc welding process, using identical parameters and procedures. The microstructure and mechanical properties of the resulting weldments are then analysed. The experimental results indicate that the subgrain structures of the welds are primarily dendritic. Under tensile testing, it is found that each specimen ruptures in the fusion zone and that the fracture surfaces exhibit entirely ductile features. It is noted that as the content of Nb increases, the welds tend to show a finer subgrain structure, i.e. having smaller dendritic spacing. Consequently, the tensile strength and microhardness of the fusion zone increase slightly and the tensile rupture mode changes from slant to flat fracture. It is determined that the interdendritic precipitates are mainly Nb rich eutectic type and Nb rich type constituents. The presence of these precipitates increases with higher concentrations of Nb in the flux and results in a significant decrease in the ductility of the weldment. Regarding the relative influence of the Mn additions, there appears to be no significant change in the subgrain structure as the percentage of Mn increases. However, the ductility tends to increase and it is also found that the tensile strength and microhardness of the fusion zone also increase slightly. Accordingly, the tensile rupture mode exhibits a slight tendency to change from flat to slant fracture. Although the interdendritic precipitates identified in the Mn series are similar to those in the Nb series, it should be noted that the precipitates appear in lower numbers and are smaller than their Nb counterparts.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. 10.5006/1.359388310.5006/1.3593883 ↗
2. 10.1007/BF0283340310.1007/BF02833403 ↗
3. Theus G. J., Emanuelson R. H., and Chou S. F. ‘Stress corrosion cracking of alloy 600 and 690 in all volatile treated water at elevated temperatures’, Report NP–3061, Electric Power Research Institute, Palo Alto, CA, 1983.
4. Page R. A., and Mcminn A. ‘Stress corrosion cracking resistance of alloy 600 and 690 and compatible weld metals in BWRs’ Report NP–5882M, Electric Power Research Institute, Palo Alto, CA, 1988.
5. 10.1007/BF0264841010.1007/BF02648410 ↗
6. 10.5006/1.328397810.5006/1.3283978 ↗
7. ‘Inconel 690’, Huntington Alloy Inc., Huntington, WV, 1985.
8. 10.1007/BF0265029210.1007/BF02650292 ↗
9. 10.5006/1.358393210.5006/1.3583932 ↗
10. Savage W. F. · Weld. J · 1977 · 245s
11. Michael F.: Proc. Int. Conf. on ‘Countermeasures for pipe cracking in BWRs’, Palo Alto, CA, January 1980, Electric Power Research Institute, Vol. 1, Paper 1.
12. Gold R. E., Harrod D. L., Aspden R. G., and Baum A. J. ‘Alloy 690 for steam generator tubing applications’, Report NP–6997–M, Electric Power Research Institute, Palo Alto, CA, 1990.
13. Kaiser S. D. · Weld. J · 1988 · 245s
14. ‘Welding products’, advertising brochure, Inco Alloys International Welding Products Co., Huntington, WV, 1993, 1–13.
15. 10.1179/13621719910153762610.1179/136217199101537626 ↗
16. 10.1179/13621719910153775210.1179/136217199101537752 ↗
17. 10.1016/S0921-5093(02)00063-110.1016/S0921-5093(02)00063-1 ↗
18. Sims C. T., Stoloff N. S., and Hagel W. C.: in ‘Superalloys II’, 97–131; 1987, New York, Wiley.
19. Bradley E. F.: in ‘Superalloys – a technical guide’, 9–51; 1988, Metals Park, OH, ASM International.
20. Barnes A. M.: Proc. 5th Int. Charles Parsons Turbine Conf. 407–430; 2000, London, The Institute of Materials.
21. 10.2207/qjjws1943.50.68010.2207/qjjws1943.50.680 ↗
22. 10.1007/BF0264705210.1007/BF02647052 ↗
23. ‘Specification for nickel alloy covered welding electrode’, AWS code A511, American Welding Society, Miami, FL, 1983.
24. Kou S.: in ‘Welding metallurgy’, 1st edn, 129–139; 1987, New York, Wiley.
25. Cieslak M. J. · Weld. J · 1991 · 49s
26. Dupont J. N. · Weld. J · 1998 · 417s
27. 10.1007/s11661-998-0319-310.1007/s11661-998-0319-3 ↗
28. 10.1007/s11661-998-0320-x10.1007/s11661-998-0320-x ↗
29. 10.1007/s11661-999-0331-210.1007/s11661-999-0331-2 ↗
30. 10.1007/BF0264505610.1007/BF02645056 ↗
31. Kurz W., and Fisher D. J.: in ‘Fundamentals of solidification’, 15–16; 1992, Aedermannsd orf, Switzerland, Trans Tech Publications Ltd.
32. Robinson J. L. · A · 1980 · 105
33. Kuo T. Y. ‘The investigation of welding characteristics of Inconel alloy 690’, PhD thesis, National Cheng Kung University, Tainan, Taiwan, 1999.