Residual stresses in girth welds of carbon steel pipes: Neutron diffraction analysis
Source abstract
Abstract
In the oil and gas industry, residual stresses in welded components, such as risers and oil offloading lines, play a key role in determining their fatigue and fracture performance. The focus of this work is on measuring the residual stresses in girth welds of large diameter (508 mm, 20 in. outside diameter) thick walled (25·4 mm, 1 in. wall thickness) pipes. Residual stresses were measured using neutrons on two girth welds on X-65 grade line pipes. One was a carbon steel weld with fully ferritic weld metal, and the second was an Inconel 625 dissimilar weld with fully austenitic weld metal. It was observed that while there were subtle differences, the overall magnitude and distribution of axial and hoop residual stresses were comparable in the two girth welds. These data are consistent with available previous measurements and computer models from the literature.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Corporate Strategic Research, ExxonMobil Research and Engineering Company, Annandale, NJ 08801, USA
NIST Center for Neutron Research, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
References (23)
Show source-provided references
1. Feng Z (ed.): ‘Processes and mechanisms of welding residual stress and distortion’; 2005, Boca Raton, FL, CRC Press.10.1533/9781845690939 ↗
2. Crawford M, Atkins GJ, Lillig DB, Kan WC, Wang HH: ‘Taking SCR's deeper – qualification of nickel based welds for deepwater caternary risers’, Proc. Deep Offshore Technology Conf., PennWell, Houston, TX, USA, February 2008, Session 5- Riser Technology 1.
3. Lillig DB, Weir MS, Kan WC, Hoyt DS: ‘Nickel-based alloy welding for enhance fatigue performance’, Proc. Deep Offshore Technology Conf., PennWell Vitória, Espírito Santo, Brazil, November 2005, Session 20- Riser SCR 2.
4. 10.1016/S1350-6307(02)00051-110.1016/S1350-6307(02)00051-1 ↗
5. 10.1179/174329306X11326210.1179/174329306X113262 ↗
6. 10.1179/136217109X45698810.1179/136217109X456988 ↗
7. 10.1179/174329308X30009110.1179/174329308X300091 ↗
8. 10.1016/j.physb.2006.05.19610.1016/j.physb.2006.05.196 ↗
9. 10.1016/j.msea.2006.04.06210.1016/j.msea.2006.04.062 ↗
10. 10.1016/j.ijpvp.2007.10.00410.1016/j.ijpvp.2007.10.004 ↗
11. 10.1179/stw.1998.3.4.20410.1179/stw.1998.3.4.204 ↗
12. Scaramangas A, Porter Goff RFD: ‘Residual stresses in cylinder girth butt welds’, Proc. Offshore Technology Conf., Houston, TX, USA, May 1985, Paper 5024.10.4043/5024-MS ↗
13. 10.1179/13621710322500891910.1179/136217103225008919 ↗
14. 10.1179/174329307X21386410.1179/174329307X213864 ↗
15. 10.1179/136217110X1271421730961410.1179/136217110X12714217309614 ↗
16. 10.1179/136217109X43717810.1179/136217109X437178 ↗
17. 10.1115/1.274881710.1115/1.2748817 ↗
18. Yaghi A · J. Pres. Ves.-Trans. ASME · 2010 · 132 · 0112061
19. 10.1016/j.ijpvp.2006.08.01410.1016/j.ijpvp.2006.08.014 ↗
20. 10.1179/02670830110150998010.1179/026708301101509980 ↗
21. Hauk V: ‘Structural and residual stress analysis by nondestructive methods’; 1997, Amsterdam, Elsevier Science B.V.
22. 10.1016/j.ijpvp.2006.10.00610.1016/j.ijpvp.2006.10.006 ↗
23. 10.1179/13621710222500425710.1179/136217102225004257 ↗