Model based optimisation of friction stir welding processes
Source abstract
Abstract
This paper proposes a model based approach for the optimisation of friction stir welding processes. The proposed approach starts with building a model of the process. For this study, the thermal model developed by Chao and his associate for friction stir welding of AA 2195-T8 is replicated using Fluent. Once developed, the thermal model is then used to simulate the process. Two surrogate models, one linear and one non-linear, are constructed to relate three process parameters with maximum temperature at a selected location, using the simulation data generated by the thermal model. A constrained optimisation model is next formulated, which is eventually solved by five population based metaheuristrics to find the optimal solutions for the studied friction stir welding process. The optimal solutions are primarily constrained by the lower bound of the temperature. The lower this lower bound temperature is the higher travel speed can go. The linear surrogate model results in a slightly better optimal solution than the non-linear model when the temperature constraint is loose and the converse is true when the temperature constraint is tight. Comparing all five metaheuristics, differential evolution has the best performance, followed by particle swarm optimisation, ant colony optimisation, genetic algorithm, and lastly harmony search.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · RFID technology advancements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Construction Management and Industrial Engineering, Louisiana State University, Baton Rouge, LA 70803, USA
References (34)
Show source-provided references
1. 10.1106/LTKR-JFBM-RGMV-WVCF10.1106/LTKR-JFBM-RGMV-WVCF ↗
2. 10.1115/1.153774110.1115/1.1537741 ↗
3. 10.1179/174329307X19753910.1179/174329307X197539 ↗
4. Daftardar S. ‘Laser assisted friction stir welding: finite volume modeling and metaheuristic optimization’, Master thesis, Louisiana State University, Baton Rouge, LA, USA.
5. 10.1016/S0045-7825(99)00389-810.1016/S0045-7825(99)00389-8 ↗
6. 10.1504/IJMR.2008.01921310.1504/IJMR.2008.019213 ↗
7. 10.1007/s11661-006-1054-210.1007/s11661-006-1054-2 ↗
8. 10.1115/1.276972710.1115/1.2769727 ↗
9. Goldberg D. E. ‘Genetic algorithms in search, optimization, and machine learning’; 1989, Boston, MA, Addison-Wesley.
10. 10.1106/648R-2CNE-2PD0-45L610.1106/648R-2CNE-2PD0-45L6 ↗
11. 10.1016/j.ijmachtools.2008.02.00110.1016/j.ijmachtools.2008.02.001 ↗
12. Houck C., Joines J., and Kay M. ‘A genetic algorithm for function optimization: a Matlab implementation’, NCSU-IE TR 95–09, North Carolina State University, Raleigh, NC, USA, 2009.
13. 10.1002/tee.2007810.1002/tee.20078 ↗
14. 10.1179/13621710322501094310.1179/136217103225010943 ↗
15. 10.1046/j.1460-2695.2002.00466.x10.1046/j.1460-2695.2002.00466.x ↗
16. 10.1016/S1003-6326(08)60096-510.1016/S1003-6326(08)60096-5 ↗
17. 10.1016/0890-6955(94)90025-610.1016/0890-6955(94)90025-6 ↗
18. Liao T. W. · J. Manuf. Sci. Technol · 1998 · 120 · 109
19. 10.1016/j.amc.2006.11.03310.1016/j.amc.2006.11.033 ↗
20. McClure J. C., Feng Z., Tang T., Gould J. E., Murr L. E., and Guo X.: Proc. 5th Int. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, June 1998, ASM International, 590–599.
21. Meng Z., Chen H., and Yue X.: in ‘International Federation for Information Processing (IFIP)’, vol. 207, ‘Knowledge enterprise: intelligent strategies in product design, manufacturing, and management’, (eds. K. Wang et al.), 483–491; 2006, Boston, MA, Springer.
22. 10.2355/isijinternational.40.Suppl_S1510.2355/isijinternational.40.Suppl_S15 ↗
23. 10.1016/j.pmatsci.2008.05.00110.1016/j.pmatsci.2008.05.001 ↗
24. 10.3139/146.10165510.3139/146.101655 ↗
25. 10.1016/j.actamat.2005.03.04410.1016/j.actamat.2005.03.044 ↗
26. 10.1016/j.scriptamat.2007.10.00810.1016/j.scriptamat.2007.10.008 ↗
27. 10.1007/s10853-005-2808-810.1007/s10853-005-2808-8 ↗
28. 10.1007/s11661-001-1038-110.1007/s11661-001-1038-1 ↗
29. 10.1179/174329306X8440910.1179/174329306X84409 ↗
30. 10.1016/j.ejor.2006.06.04610.1016/j.ejor.2006.06.046 ↗
31. Squillace A., Segreto T., Prisco U., Teti R., and Campanile G.: Proc. 3rd IPROMS NoE Virtual Int. Conf. on ‘Intelligent production machines and systems’, Internet, July 2006, IPROMS NoE.
32. 10.1023/A:100820282132810.1023/A:1008202821328 ↗
33. 10.1016/j.jmatprotec.2004.12.01610.1016/j.jmatprotec.2004.12.016 ↗
34. 10.1016/j.msea.2006.09.09110.1016/j.msea.2006.09.091 ↗