Numerical simulation for welding pool and welding arc with variable active element and welding parameters
Source abstract
Abstract
A numerical modelling of the welding arc and weld pool is established for moving argon shielded gas tungsten arc welding to systematically investigate the effect of the active element oxygen and the welding parameters on the Marangoni convection and the weld shape using FLUENT software. The different welding parameters will change the temperature distribution and gradient on the pool surface, and affect the strength of Marangoni convection and the weld shape. Under high oxygen content, the weld depth/width (D/W) ratio substantially depends on the welding parameters. A high welding speed or large electrode gap (arc length) will make the weld D/W ratio decrease. The weld D/W ratio initially increases and then remains constant around 0·5 with the increasing welding current. When the oxygen content is lower, the weld D/W ratio decreases with the increasing welding current. However, the weld D/W ratio is not sensitive to the welding speed or electrode gap. The predicted weld D/W ratio agrees well with the experimental results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Vacuum and Plasma Arcs · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, China
References (35)
Show source-provided references
1. Gurevich S. M. · Avtom. Svarka · 1966 · 12 · 13
2. Savitskii M. M. · Avtom. Svarka · 1980 · 9 · 17
3. Lowke J. J., Tanaka M., and Ushio M.: Proc. 57th Ann. Assembly Int. Inst. Weld., Osaka, Japan, July 2004, International Institute of Welding, IIW. Doc. 212–1053–04.
4. 10.1179/13621710010153819110.1179/136217100101538191 ↗
5. Fan D. · Trans. JWRJ · 2001 · 30 · 35
6. 10.1179/174329307X15981010.1179/174329307X159810 ↗
7. Leconte S. · Sci. Technol. Weld. Join · 2006 · 47
8. 10.1179/174329306X12954410.1179/174329306X129544 ↗
9. Heiple C. R. · Weld. J · 1982 · 97s
10. 10.1179/13621710010153846110.1179/136217100101538461 ↗
11. 10.2320/matertrans.43.292610.2320/matertrans.43.2926 ↗
12. 10.1016/j.msea.2004.05.05710.1016/j.msea.2004.05.057 ↗
13. Zacharia T. · Weld. J · 1989 · 499s
14. Zacharia T. · Weld. J · 1989 · 510s
15. Xe H. · J. Phys. D · 2003 · 36 · 138810.1088/0022-3727/36/12/306 ↗
16. 10.1007/s11663-001-0017-710.1007/s11663-001-0017-7 ↗
17. 10.1179/174329307X21362010.1179/174329307X213620 ↗
18. 10.1179/174329306X14753510.1179/174329306X147535 ↗
19. Dong W. C. · Acta Metall. Sinica · 2008 · 44 · 249
20. 10.1016/j.commatsci.2008.10.01010.1016/j.commatsci.2008.10.010 ↗
21. Choo R. T. C. · Weld. J · 1994 · 25s
22. 10.1007/s11663-999-0082-x10.1007/s11663-999-0082-x ↗
23. 10.1179/13621710222500261910.1179/136217102225002619 ↗
24. 10.1179/13621710322500550710.1179/136217103225005507 ↗
25. 10.1007/BF0265774810.1007/BF02657748 ↗
26. 10.1002/nme.162024011910.1002/nme.1620240119 ↗
27. 10.1088/0022-3727/38/2/01610.1088/0022-3727/38/2/016 ↗
28. 10.1007/978-1-4899-1337-1_110.1007/978-1-4899-1337-1_1 ↗
29. 10.1063/1.176225610.1063/1.1762256 ↗
30. 10.1016/S0017-9310(00)00094-610.1016/S0017-9310(00)00094-6 ↗
31. Fluent Inc. ‘FLUENT User's Manual’, Lebanon, NH, 2005.
32. Patankar S. V. ‘Numerical heat transfer and fluid flow’; 1980, New York, McGraw-Hill.
33. 10.2355/isijinternational.45.6610.2355/isijinternational.45.66 ↗
34. Lin M. L. · Weld. J · 1985 · 163s
35. Kim S. D. · Weld. J · 1992 · 179s