Hybrid laser/arc welding process for controlling bead profile
Source abstract
Abstract
A laser hybrid welding process in which a defocused laser beam is applied beside a gas metal arc weld (GMAW) pool to modify the bead shape was studied. The present paper aims to produce welds with improved toe geometry and better fatigue life than those made with GMAW alone and to apply a numerical simulation to help configure the hybrid process. First, stationary hybrid welds were made to validate weld bead shape predictions and to characterise the spreading of the arc weld deposit to the laser heated spot. Next, the travelling hybrid process was configured with the aid of simulations and fatigue test specimens were welded. Proper application of the laser heat input induced molten metal to spread to the laser heated area, increasing the fillet weld leg length. This produced a larger weld toe angle that decreased the stress concentration and increased the fatigue life of the welds relative to standard mean values.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Fatigue and fracture mechanics · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. 10.1179/174329307X16428310.1179/174329307X164283 ↗
2. 10.1179/174329306X14754410.1179/174329306X147544 ↗
3. 10.1179/174329306X10767410.1179/174329306X107674 ↗
4. 10.1179/174329306X12953510.1179/174329306X129535 ↗
5. 10.1179/174329306X14813810.1179/174329306X148138 ↗
6. 10.1179/174329305X4417010.1179/174329305X44170 ↗
7. 10.1179/13621710422502165210.1179/136217104225021652 ↗
8. 10.1179/13621710222500131310.1179/136217102225001313 ↗
9. 10.1179/13621719910153792310.1179/136217199101537923 ↗
10. Choi H. W. · Wel. J · 2006
11. 10.1007/s10704-005-4043-310.1007/s10704-005-4043-3 ↗
12. 10.1046/j.1460-2695.2003.00586.x10.1046/j.1460-2695.2003.00586.x ↗
13. 10.1016/0013-7944(94)00241-910.1016/0013-7944(94)00241-9 ↗
14. 10.1016/S0142-1123(00)00012-810.1016/S0142-1123(00)00012-8 ↗
15. 10.1016/S0924-0136(97)00418-410.1016/S0924-0136(97)00418-4 ↗
16. Talkington J. E. ‘Variable polarity gas metal arc welding’, Master's dissertation, The Ohio State University, Columbus, OH, 1998.
17. Harwig D. D. · Weld. J · 2006
18. Joseph A. · Weld. J · 2001 · 80 · 36
19. ‘Code of practice for fatigue design and assessment of steel structures’, 43; 1993, London, British Standards Institution.
20. 10.1179/13621710322500564210.1179/136217103225005642 ↗
21. Cho M. H. · Weld. J · 2006
22. Jackson C. E. · Weld. J · 1960
23. 10.1007/BF0266752110.1007/BF02667521 ↗
24. Lu M. · Weld. J · 1988
25. Prokhorov A. M., Konov V. I., Ursu I., and Mihailescu I. N. ‘Laser heating of metals’, 40; 1990, Bristol, Philadelphia, New York, Adam Hilger.
26. ‘Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials’, ASTM International, West Conshohocken, PA, USA.