journal article·2019-12

Dense and pure high-entropy metal diboride ceramics sintered from self-synthesized powders via boro/carbothermal reduction approach

Junfeng Gu, Ji Zou, Shi-Kuan Sun, Hao Wang, Su-Yang Yu, Jinyong Zhang, Weimin Wang, Zhengyi Fu

Science China Materials· Volume 62· Issue 12
Publisher page

Abstract

Equimolar quinary diboride powders, with nominal composition of (Ti0.2Hf0.2Zr0.2Nb0.2Ta0.2)B2, were synthesized by boro/carbothermal reduction (BCTR) of oxide mixtures (MO x , M = Ti, Hf, Zr, Nb and Ta) using B4C as source of B and C in vacuum. By adjusting the B4C/MO x ratios, diboride mixtures without detectable MO x were obtained at 1600°C, while high-entropy diboride (HEB) powders with particle size of 1 μm was obtained at 1800°C. The phase, morphology and solid solution evolution process of the HEB powders during the BCTR process were comprehensively investigated. Although X-ray diffraction pattern indicated the powders synthesized at 1800°C were in a single-phase AlB2 structure, elemental mappings showed that (Ta, Ti)-rich and (Zr, Nb)-rich solid solution coexisted in the HEB powders. The distribution of niobium and zirconium atoms in HEB was unable to reach uniform until the HEB powders were spark plasma sintered at 2000°C. (Ti0.2Hf0.2Zr0.2Nb0.2Ta0.2)B2 ceramics with a relative density of 97.9% were obtained after spark plasma sintering the HEB powders at 2050°C under 50 MPa. Rapid grain growth was found in this composition when the sintering temperature was increased from 2000 to 2050°C, and the averaged grain size increased from 6.67 to 41.2 μm. HEB ceramics sintered at 2000°C had a Vickers hardness of 22.44 ± 0.56 GPa (under a load of 1 kg), a Young’s modulus of ~500 GPa and a fracture toughness of 2.83 ± 0.15 MPa m1/2. This is the first report for obtaining high density HEB ceramics without residual oxide phase, benefiting from the high quality HEB powders obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Yeh JW, Chen SK, Lin SJ, et al. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater, 2004, 6: 299–30310.1002/adem.200300567 ↗
2. Zhang Y, Zuo TT, Tang Z, et al. Microstructures and properties of high-entropy alloys. Prog Mater Sci, 2014, 61: 1–9310.1016/j.pmatsci.2013.10.001 ↗
3. Zhang W, Liaw PK, Zhang Y. Science and technology in high-entropy alloys. Sci China Mater, 2018, 61: 2–2210.1007/s40843-017-9195-8 ↗
4. Rost CM, Sachet E, Borman T, et al. Entropy-stabilized oxides. Nat Commun, 2015, 6: 848510.1038/ncomms9485 ↗
5. Bérardan D, Franger S, Meena AK, et al. Room temperature lithium superionic conductivity in high entropy oxides. J Mater Chem A, 2016, 4: 9536–954110.1039/C6TA03249D ↗
6. Bérardan D, Franger S, Dragoe D, et al. Colossal dielectric constant in high entropy oxides. Phys Status Solidi RRL, 2016, 10: 328–33310.1002/pssr.201600043 ↗
7. Rost CM, Rak Z, Brenner DW, et al. Local structure of the MgxNixCoxCuxZnxO (x = 0.2) entropy-stabilized oxide: An EXAFS study. J Am Ceram Soc, 2017, 100: 2732–273810.1111/jace.14756 ↗
8. Meisenheimer PB, Kratofil TJ, Heron JT. Giant enhancement of exchange coupling in entropy-stabilized oxide heterostructures. Sci Rep, 2017, 7: 1334410.1038/s41598-017-13810-5 ↗
9. Jiang S, Hu T, Gild J, et al. A new class of high-entropy perovskite oxides. Scripta Mater, 2018, 142: 116–12010.1016/j.scriptamat.2017.08.040 ↗
10. Sarkar A, Velasco L, Wang D, et al. High entropy oxides for reversible energy storage. Nat Commun, 2018, 9: 340010.1038/s41467-018-05774-5 ↗
11. Braun JL, Rost CM, Lim M, et al. Charge-induced disorder controls the thermal conductivity of entropy-stabilized oxides. Adv Mater, 2018, 30: 180500410.1002/adma.201805004 ↗
12. Sarkar A, Djenadic R, Wang D, et al. Rare earth and transition metal based entropy stabilised perovskite type oxides. J Eur Ceramic Soc, 2018, 38: 2318–232710.1016/j.jeurceramsoc.2017.12.058 ↗
13. Anand G, Wynn AP, Handley CM, et al. Phase stability and distortion in high-entropy oxides. Acta Mater, 2018, 146: 119–12510.1016/j.actamat.2017.12.037 ↗
14. Hong W, Chen F, Shen Q, et al. Microstructural evolution and mechanical properties of (Mg,Co,Ni,Cu,Zn)O high-entropy ceramics. J Am Ceram Soc, 2018, 375: jace.1607510.1111/jace.16075 ↗
15. Castle E, Csanádi T, Grasso S, et al. Processing and properties of high-entropy ultra-high temperature carbides. Sci Rep, 2018, 8: 860910.1038/s41598-018-26827-1 ↗
16. Sarker P, Harrington T, Toher C, et al. High-entropy high-hardness metal carbides discovered by entropy descriptors. Nat Commun, 2018, 9: 498010.1038/s41467-018-07160-7 ↗
17. Yan X, Constantin L, Lu Y, et al. (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics with low thermal conductivity. J Am Ceram Soc, 2018, 101: 4486–449110.1111/jace.15779 ↗
18. Dusza J, Švec P, Girman V, et al. Microstructure of (Hf-Ta-Zr-Nb)C high-entropy carbide at micro and nano/atomic level. J Eur Ceramic Soc, 2018, 38: 4303–430710.1016/j.jeurceramsoc.2018.05.006 ↗
19. Feng L, Fahrenholtz WG, Hilmas GE, et al. Synthesis of singlephase high-entropy carbide powders. Scripta Mater, 2019, 162: 90–9310.1016/j.scriptamat.2018.10.049 ↗
20. Harrington TJ, Gild J, Sarker P, et al. Phase stability and mechanical properties of novel high entropy transition metal carbides. Acta Mater, 2019, 166: 271–28010.1016/j.actamat.2018.12.054 ↗
21. Ye B, Wen T, Huang K, et al. First-principles study, fabrication, and characterization of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramic. J Am Ceram Soc, 2019, 102: 4344–435210.1111/jace.16295 ↗
22. Gild J, Zhang Y, Harrington T, et al. High-entropy metal diborides: A new class of high-entropy materials and a new type of ultrahigh temperature ceramics. Sci Rep, 2016, 6: 3794610.1038/srep37946 ↗
23. Wang YP, Gan GY, Wang W, et al. Ab initio prediction of mechanical and electronic properties of ultrahigh temperature high-entropy ceramics (Hf0.2Zr0.2Ta0.2M0.2Ti0.2)B2(M = Nb, Mo, Cr). Phys Status Solidi B, 2018, 255: 180001110.1002/pssb.201800011 ↗
24. Mayrhofer PH, Kirnbauer A, Ertelthaler P, et al. High-entropy ceramic thin films: A case study on transition metal diborides. Scripta Mater, 2018, 149: 93–9710.1016/j.scriptamat.2018.02.008 ↗
25. Tallarita G, Licheri R, Garroni S, et al. Novel processing route for the fabrication of bulk high-entropy metal diborides. Scripta Mater, 2019, 158: 100–10410.1016/j.scriptamat.2018.08.039 ↗
26. Zhang Y, Guo WM, Jiang ZB, et al. Dense high-entropy boride ceramics with ultra-high hardness. Scripta Mater, 2019, 164: 135–13910.1016/j.scriptamat.2019.01.021 ↗
27. Lai CH, Lin SJ, Yeh JW, et al. Preparation and characterization of AlCrTaTiZr multi-element nitride coatings. Surf Coatings Tech, 2006, 201: 3275–328010.1016/j.surfcoat.2006.06.048 ↗
28. Hsieh MH, Tsai MH, Shen WJ, et al. Structure and properties of two Al-Cr-Nb-Si-Ti high-entropy nitride coatings. Surf Coatings Tech, 2013, 221: 118–12310.1016/j.surfcoat.2013.01.036 ↗
29. Jin T, Sang X, Unocic RR, et al. Mechanochemical-assisted synthesis of high-entropy metal nitride via a soft urea strategy. Adv Mater, 2018, 30: 170751210.1002/adma.201707512 ↗
30. Qin Y, Liu JX, Li F, et al. A high entropy silicide by reactive spark plasma sintering. J Adv Ceram, 2019, 8: 148–15210.1007/s40145-019-0319-3 ↗
31. Dai FZ, Zhou Y, Sun W. Segregation of solute atoms (Y, Nb, Ta, Mo and W) in ZrB2 grain boundaries and their effects on grain boundary strengths: A first-principles investigation. Acta Mater, 2017, 127: 312–31810.1016/j.actamat.2017.01.048 ↗
32. Ran S, Van der Biest O, Vleugels J. ZrB2 powders synthesis by borothermal reduction. J Am Ceramic Soc, 201010.1111/j.1551-2916.2010.03747.x ↗
33. Guo WM, Zhang GJ. Reaction processes and characterization of ZrB2 powder prepared by boro/carbothermal reduction of ZrO2 in vacuum. J Am Ceramic Soc, 2009, 92: 264–26710.1111/j.1551-2916.2008.02836.x ↗
34. Zhao H, He Y, Jin Z. Preparation of zirconium boride powder. J Am Ceramic Soc, 1995, 78: 2534–253610.1111/j.1151-2916.1995.tb08696.x ↗
35. Zeng L, Wei W, Sun S, et al. Powder characteristics, sinterability, and mechanical properties of TiB2 prepared by three reduction methods. J Am Ceram Soc, 2019, 102: 4511–451910.1111/jace.16377 ↗
36. You Y, Tan DW, Guo WM, et al. TaB2 powders synthesis by reduction of Ta2O5 with B4C. Ceramics Int, 2017, 43: 897–90010.1016/j.ceramint.2016.09.193 ↗
37. Feng L, Kim JM, Lee SH, et al. Synthesis of a fine (Ta0.8,Hf0.2)C powder from carbide or oxide powder mixtures. J Am Ceram Soc, 2016, 99: 1129–113210.1111/jace.14144 ↗
38. Wang H, Lee SH, Kim HD, et al. Nano-hafnium diboride powders synthesized using a spark plasma sintering apparatus. J Am Ceram Soc, 2012, 95: 1493–149610.1111/j.1551-2916.2012.05141.x ↗
39. Xie J, Fu Z, Wang Y, et al. Synthesis of nanosized zirconium carbide powders by a combinational method of sol-gel and pulse current heating. J Eur Ceramic Soc, 2014, 34: 13.e1–13.e7
40. Wang R, Wang Y, Fu Z, et al. Spark plasma sintering of transparent YAG ceramics assisted by the YAH-YAG phase transformation. J Eur Ceramic Soc, 2016, 36: 2153–215610.1016/j.jeurceramsoc.2016.02.038 ↗
41. Rietveld HM. Line profiles of neutron powder-diffraction peaks for structure refinement. Acta Cryst, 1967, 22: 151–15210.1107/S0365110X67000234 ↗
42. Toby BH. EXPGUI, a graphical user interface for GSAS. J Appl Crystlogr, 2001, 34: 210–21310.1107/S0021889801002242 ↗
43. Evans AG, Charles EA. Fracture toughness determinations by indentation. J Am Ceramic Soc, 1976, 59: 371–37210.1111/j.1151-2916.1976.tb10991.x ↗
44. Avilés MA, Córdoba JM, Sayagués MJ, et al. Mechanosynthesis of Hf1−xZrxB2 solid solution and Hf1−xZrxB2/SiC composite powders. J Am Ceramic Soc, 2010, 93: 696–70210.1111/j.1551-2916.2009.03484.x ↗
45. Liu D, Wen T, Ye B, et al. Molten salt synthesis, characterization, and formation mechanism of superfine (HfxZr1−x)B2 solid-solution powders. J Am Ceram Soc, 2019, 102: 3763–377010.1111/jace.16246 ↗
46. Zhou N, Hu T, Huang J, et al. Stabilization of nanocrystalline alloys at high temperatures via utilizing high-entropy grain boundary complexions. Scripta Mater, 2016, 124: 160–16310.1016/j.scriptamat.2016.07.014 ↗
47. Lei Z, Liu X, Wang H, et al. Development of advanced materials via entropy engineering. Scripta Mater, 2019, 165: 164–16910.1016/j.scriptamat.2019.02.015 ↗
48. Zou J, Zhang GJ, Kan YM, et al. Hot-pressed ZrB2-SiC ceramics with VC addition: chemical reactions, microstructures, and mechanical properties. J Am Ceramic Soc, 2009, 92: 2838–284610.1111/j.1551-2916.2009.03293.x ↗
49. Zhang Y, Jiang ZB, Sun SK, et al. Microstructure and mechanical properties of high-entropy borides derived from boro/carbothermal reduction. J Eur Ceramic Soc, 2019, 39: 3920–392410.1016/j.jeurceramsoc.2019.05.017 ↗
50. Mukhopadhyay A, Raju GB, Basu B, et al. Correlation between phase evolution, mechanical properties and instrumented indentation response of TiB2-based ceramics. J Eur Ceramic Soc, 2009, 29: 505–51610.1016/j.jeurceramsoc.2008.06.030 ↗
51. Chamberlain AL, Fahrenholtz WG, Hilmas GE, et al. High-strength zirconium diboride-based ceramics. J Am Ceramic Soc, 2004, 87: 1170–117210.1111/j.1551-2916.2004.01170.x ↗
52. Sairam K, Sonber JK, Murthy TSRC, et al. Reaction spark plasma sintering of niobium diboride. Int J Refractory Met Hard Mater, 2014, 43: 259–26210.1016/j.ijrmhm.2013.12.011 ↗
53. Ni DW, Zhang GJ, Kan YM, et al. Hot pressed HfB2 and HfB2-20 vol%SiC ceramics based on HfB2 powder synthesized by borothermal reduction of HfO2. Int J Appl Ceramic Tech, 2010, 7: 830–83610.1111/j.1744-7402.2009.02404.x ↗
54. Licheri R, Orrù R, Musa C, et al. Synthesis, densification and characterization of TaB2-SiC composites. Ceramics Int, 2010, 36: 937–94110.1016/j.ceramint.2009.10.028 ↗