journal article·2019-10Open access

Engineering oxygen vacancies in hierarchically Li-rich layered oxide porous microspheres for high-rate lithium ion battery cathode

Yuxin Cai, Lun Ku, Laisen Wang, Yating Ma, Hongfei Zheng, Wanjie Xu, Jiangtao Han, Baihua Qu, Yuanzhi Chen, Qingshui Xie, Dong-Liang Peng

Science China Materials· Volume 62· Issue 10

Abstract

Lithium-rich layered oxides always suffer from low initial Coulombic efficiency, poor rate capability and rapid voltage fading. Herein, engineering oxygen vacancies in hierarchically Li1.2Mn0.54Ni0.13Co0.13O2 porous microspheres (L@S) is carried out to suppress the formation of irreversible Li2O during the initial discharge process and improve the Li+ diffusion kinetics and structural stability of the cathode mateiral. As a result, the prepared L@S cathode delivers high initial Coulombic efficiency of 92.3% and large specific capacity of 292.6 mA h g−1 at 0.1 C. More importantly, a large reversible capacity of 222 mA h g−1 with a capacity retention of 95.7% can be obtained after 100 cycles at 10 C. Even cycled at ultrahigh rate of 20 C, the L@S cathode can deliver stable reversible capacity of 153 mA h g−1 after 100 cycles. Moreover, the full cell using L@S as cathode and Li4Ti5O12 as anode exhibits a relatively high reversible capacity of 141 mA h g−1 with an outstanding voltage retention of 97% after 400 cycles at a large current density of 3 C. These results may shed light on the improvement of electrochemical performances of lithium-rich layered oxides via the multiscale coordinated design based on atomic defects, microstructure and composition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Goodenough JB, Kim Y. Challenges for rechargeable Li batteries. Chem Mater, 2010, 22: 587–60310.1021/cm901452z ↗
2. Tarascon JM, Armand M. Issues and challenges facing rechargeable lithium batteries. Nature, 2001, 414: 359–36710.1038/35104644 ↗
3. Xi LJ, Wang HE, Lu ZG, et al. Facile synthesis of porous LiMn2O4 spheres as positive electrode for high-power lithium ion batteries. J Power Sources, 2012, 198: 251–25710.1016/j.jpowsour.2011.09.100 ↗
4. Wang G, Liu H, Liu J, et al. Mesoporous LiFePO4/C nano-composite cathode materials for high power lithium ion batteries with superior performance. Adv Mater, 2010, 22: 4944–494810.1002/adma.201002045 ↗
5. Shi JL, Xiao DD, Ge M, et al. High-capacity cathode material with high voltage for Li-ion batteries. Adv Mater, 2018, 30: 170557510.1002/adma.201705575 ↗
6. Yu H, Zhou H. High-energy cathode materials (Li2MnO3—LiMO2) for lithium-ion batteries. J Phys Chem Lett, 2013, 4: 1268–128010.1021/jz400032v ↗
7. Wang J, He X, Paillard E, et al. Lithium- and manganese-rich oxide cathode materials for high-energy lithium ion batteries. Adv Energy Mater, 2016, 6: 160090610.1002/aenm.201600906 ↗
8. Yabuuchi N, Yoshii K, Myung ST, et al. Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3—LiCo1/3Ni1/3Mn1/3O2. J Am Chem Soc, 2011, 133: 4404–441910.1021/ja108588y ↗
9. Yu X, Lyu Y, Gu L, et al. Understanding the rate capability of high-energy-density li-rich layered Li1.2Ni0.15Co0.1Mn0.55O2 cathode materials. Adv Energy Mater, 2014, 4: 130095010.1002/aenm.201300950 ↗
10. Chen M, Chen D, Liao Y, et al. Layered lithium-rich oxide nanoparticles doped with spinel phase: Acidic sucrose-assistant synthesis and excellent performance as cathode of lithium ion battery. ACS Appl Mater Interfaces, 2016, 8: 4575–458410.1021/acsami.5b10219 ↗
11. Qiu B, Yin C, Xia Y, et al. Synthesis of three-dimensional nanoporous Li-rich layered cathode oxides for high volumetric and power energy density lithium-ion batteries. ACS Appl Mater Interfaces, 2017, 9: 3661–366610.1021/acsami.6b14169 ↗
12. Zhang Y, Zhang W, Shen S, et al. Hollow porous bowl-shaped lithium-rich cathode material for lithium-ion batteries with exceptional rate capability and stability. J Power Sources, 2018, 380: 164–17310.1016/j.jpowsour.2018.01.084 ↗
13. Chen Z, Yan X, Xu M, et al. Building honeycomb-like hollow microsphere architecture in a bubble template reaction for high-performance lithium-rich layered oxide cathode materials. ACS Appl Mater Interfaces, 2017, 9: 30617–3062510.1021/acsami.7b07542 ↗
14. Cai Y, Huang SZ, She FS, et al. Facile synthesis of well-shaped spinel LiNi0.5Mn1.5O4 nanoparticles as cathode materials for lithium ion batteries. RSC Adv, 2016, 6: 2785–279210.1039/C5RA21723G ↗
15. Yan P, Zheng J, Zhang X, et al. Atomic to nanoscale investigation of functionalities of an Al2O3 coating layer on a cathode for enhanced battery performance. Chem Mater, 2016, 28: 857–86310.1021/acs.chemmater.5b04301 ↗
16. Zhang X, Belharouak I, Li L, et al. Structural and electrochemical study of Al2O3 and TiO2 coated Li1.2Ni0.13Mn0.54Co0.13O2 cathode material using ALD. Adv Energy Mater, 2013, 3: 1299–130710.1002/aenm.201300269 ↗
17. Zhang S, Gu H, Tang T, et al. In situ encapsulation of the nanoscale Er2O3 phase to drastically suppress voltage fading and capacity degradation of a Li- and Mn-rich layered oxide cathode for lithium ion batteries. ACS Appl Mater Interfaces, 2017, 9: 33863–3387510.1021/acsami.7b09002 ↗
18. Zheng F, Yang C, Xiong X, et al. Nanoscale surface modification of lithium-rich layered-oxide composite cathodes for suppressing voltage fade. Angew Chem Int Ed, 2015, 54: 13058–1306210.1002/anie.201506408 ↗
19. Sun S, Yin Y, Wan N, et al. AlF3 surface-coated Li[Li0.2Ni0.17 Co0.07Mn0.56]O2 nanoparticles with superior electrochemical performance for lithium-ion batteries. ChemSusChem, 2015, 8: 2544–255010.1002/cssc.201500143 ↗
20. Liu J, Hou M, Yi J, et al. Improving the electrochemical performance of layered lithium-rich transition-metal oxides by controlling the structural defects. Energy Environ Sci, 2014, 7: 705–71410.1039/C3EE41664J ↗
21. Xie Q, Liu P, Zeng D, et al. Dual electrostatic assembly of graphene encapsulated nanosheet-assembled ZnO-Mn-C hollow micro-spheres as a lithium ion battery anode. Adv Funct Mater, 2018, 28: 170743310.1002/adfm.201707433 ↗
22. Qiu B, Zhang M, Wu L, et al. Gas-solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries. Nat Commun, 2016, 7: 1210810.1038/ncomms12108 ↗
23. Wang G, Yi L, Yu R, et al. Li1.2Ni0.13Co0.13Mn0.54O2 with controllable morphology and size for high performance lithium-ion batteries. ACS Appl Mater Interfaces, 2017, 9: 25358–2536810.1021/acsami.7b07095 ↗
24. Zhang H, Wang J, Liu Q, et al. Extracting oxygen anions from ZnMn2O4: Robust cathode for flexible all-solid-state Zn-ion batteries. Energy Storage Mater, 201810.1016/j.ensm.2018.12.019 ↗
25. Ji Y, Li R, Mu D, et al. Surface modification of Li1.2Mn0.56Ni0.16 Co0.08O2 cathode material by supercritical CO2 for lithium-ion batteries. J Electrochem Soc, 2018, 165: A2880–A288810.1149/2.1251811jes ↗
26. Liu D, Wang C, Yu Y, et al. Understanding the nature of ammonia treatment to synthesize oxygen vacancy-enriched transition metal oxides. Chem, 2019, 5: 376–38910.1016/j.chempr.2018.11.001 ↗
27. Xu M, Fei L, Zhang W, et al. Tailoring anisotropic Li-ion transport tunnels on orthogonally arranged Li-rich layered oxide nanoplates toward high-performance Li-ion batteries. Nano Lett, 2017, 17: 1670–167710.1021/acs.nanolett.6b04951 ↗
28. Liu D, Zhang C, Yu Y, et al. Hydrogen evolution activity enhancement by tuning the oxygen vacancies in self-supported mesoporous spinel oxide nanowire arrays. Nano Res, 2017, 11: 603–61310.1007/s12274-017-1670-8 ↗
29. Zhang L, Wang W, Jiang D, et al. Photoreduction of CO2 on BiOCl nanoplates with the assistance of photoinduced oxygen vacancies. Nano Res, 2014, 8: 821–83110.1007/s12274-014-0564-2 ↗
30. Yu Y, Shi Y, Zhang B Synergetic transformation of solid inorganic-organic hybrids into advanced nanomaterials for catalytic water splitting. Acc Chem Res, 2018, 51: 1711–172110.1021/acs.accounts.8b00193 ↗
31. Zhang XD, Shi JL, Liang JY, et al. Suppressing surface lattice oxygen release of Li-rich cathode materials via heterostructured spinel Li4Mn5O12 coating. Adv Mater, 2018, 30: 180175110.1002/adma.201801751 ↗
32. Baddour-Hadjean R, Pereira-Ramos JP. Raman microspectrometry applied to the study of electrode materials for lithium batteries. Chem Rev, 2010, 110: 1278–131910.1021/cr800344k ↗
33. Zhao J, Huang R, Gao W, et al. An ion-exchange promoted phase transition in a Li-excess layered cathode material for high-performance lithium ion batteries. Adv Energy Mater, 2015, 5: 140193710.1002/aenm.201401937 ↗
34. Yu R, Zhang X, Liu T, et al. Spinel/layered heterostructured Lithium-rich oxide nanowires as cathode material for high-energy lithium-ion batteries. ACS Appl Mater Interfaces, 2017, 9: 41210–4122310.1021/acsami.7b11942 ↗
35. Fell CR, Qian D, Carroll KJ, et al. Correlation between oxygen vacancy, microstrain, and cation distribution in lithium-excess layered oxides during the first electrochemical cycle. Chem Mater, 2013, 25: 1621–162910.1021/cm4000119 ↗
36. Xu M, Lian Q, Wu Y, et al. Li+-conductive Li2SiO3 stabilized Lirich layered oxide with an in situ formed spinel nano-coating layer: Toward enhanced electrochemical performance for lithium-ion batteries. RSC Adv, 2016, 6: 34245–3425310.1039/C6RA00769D ↗
37. Xiao Z, Meng J, Li Q, et al. Novel MOF shell-derived surface modification of Li-rich layered oxide cathode for enhanced lithium storage. Sci Bull, 2018, 63: 46–5310.1016/j.scib.2017.12.011 ↗
38. Yu FD, Que LF, Wang ZB, et al. Controllable synthesis of hierarchical ball-in-ball hollow microspheres for a high performance layered Li-rich oxide cathode material. J Mater Chem A, 2017, 5: 9365–937610.1039/C7TA02553J ↗
39. Pang S, Xu K, Wang Y, et al. Enhanced electrochemical performance of Li-rich layered cathode materials via chemical activation of Li2MnO3 component and formation of spinel/carbon coating layer. J Power Sources, 2017, 365: 68–7510.1016/j.jpowsour.2017.08.077 ↗
40. Kim S, Cho W, Zhang X, et al. A stable lithium-rich surface structure for lithium-rich layered cathode materials. Nat Commun, 2016, 7: 1359810.1038/ncomms13598 ↗
41. Li X, Zhang K, Mitlin D, et al. Fundamental insight into Zr modification of Li- and Mn-rich cathodes: Combined transmission electron microscopy and electrochemical impedance spectroscopy study. Chem Mater, 2018, 30: 2566–257310.1021/acs.chemmater.7b04861 ↗
42. Yu R, Zhang X, Liu T, et al. Hierarchically structured lithium-rich layered oxide with exposed active {010} planes as high-rate-capability cathode for lithium-ion batteries. ACS Sustain Chem Eng, 2017, 5: 8970–898110.1021/acssuschemeng.7b01773 ↗
43. Pei Y, Xu CY, Xiao YC, et al. Phase transition induced synthesis of layered/spinel heterostructure with enhanced electrochemical properties. Adv Funct Mater, 2017, 27: 160434910.1002/adfm.201604349 ↗
44. Li X, Qiao Y, Guo S, et al. Direct visualization of the reversible O2−/O− redox process in Li-rich cathode materials. Adv Mater, 2018, 30: 170519710.1002/adma.201705197 ↗