journal article·2018-01Open access

Nanostructuring the electronic conducting La0.8Sr0.2MnO3−δ cathode for high-performance in proton-conducting solid oxide fuel cells below 600°C

Eman Husni Daʹas, Lei Bi, Samir Boulfrad, Enrico Traversa

Science China Materials· Volume 61· Issue 1

Abstract

Proton-conducting oxides offer a promising electrolyte solution for intermediate temperature solid oxide fuel cells (SOFCs) due to their high conductivity and low activation energy. However, the lower operation temperature leads to a reduced cathode activity and thus a poorer fuel cell performance. La0.8Sr0.2MnO3−δ (LSM) is the classical cathode material for high-temperature SOFCs, which lack features as a proper SOFC cathode material at intermediate temperatures. Despite this, we here successfully couple nanostructured LSM cathode with proton-conducting electrolytes to operate below 600°C with desirable SOFC performance. Inkjet printing allows depositing nanostructured particles of LSM on Y-doped BaZrO3 (BZY) backbones as cathodes for proton-conducting SOFCs, which provides one of the highest power output for the BZY-based fuel cells below 600°C. This somehow changes the common knowledge that LSM can be applied as a SOFC cathode materials only at high temperatures (above 700°C).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Stambouli AB, Traversa E. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy. Renew Sustain Energ Rev, 2002, 6: 433–45510.1016/S1364-0321(02)00014-X ↗
2. Steele BCH, Heinzel A. Materials for fuel-cell technologies. Nature, 2001, 414: 345–35210.1038/35104620 ↗
3. Suzuki T, Hasan Z, Funahashi Y, et al. Impact of anode microstructure on solid oxide fuel cells. Science, 2009, 325: 852–85510.1126/science.1176404 ↗
4. Wachsman ED, Lee KT. Lowering the temperature of solid oxide fuel cells. Science, 2011, 334: 935–93910.1126/science.1204090 ↗
5. Fabbri E, Pergolesi D, Traversa E. Materials challenges toward proton-conducting oxide fuel cells: a critical review. Chem Soc Rev, 2010, 39: 4355–436910.1039/b902343g ↗
6. Norby T, Wideroe M, Glockner R, et al. Hydrogen in oxides. Dalton Trans, 2004, 25: 3012–301810.1039/B403011G ↗
7. Malavasi L, Fisher CAJ, Islam MS. Oxide-ion and proton conducting electrolyte materials for clean energy applications: structural and mechanistic features. Chem Soc Rev, 2010, 39: 4370–438710.1039/b915141a ↗
8. Pergolesi D, Fabbri E, D'Epifanio A, et al. High proton conduction in grain-boundary-free yttrium-doped barium zirconate films grown by pulsed laser deposition. Nat Mater, 2010, 9: 846–85210.1038/nmat2837 ↗
9. Katahira K, Kohchi Y, Shimura T, et al. Protonic conduction in Zrsubstituted BaCeO3. Solid State Ion, 2000, 138: 91–9810.1016/S0167-2738(00)00777-3 ↗
10. Zhong Z. Stability and conductivity study of the BaCe0.9−xZrxY0.1 O2.95 systems. Solid State Ion, 2007, 178: 213–22010.1016/j.ssi.2006.12.007 ↗
11. Fabbri E, Depifanio A, Dibartolomeo E, et al. Tailoring the chemical stability of Ba(Ce0.8−xZrx)Y0.2O3−δ protonic conductors for intermediate temperature solid oxide fuel cells (IT-SOFCs). Solid State Ion, 2008, 179: 558–56410.1016/j.ssi.2008.04.002 ↗
12. Stokes SJ, Islam MS. Defect chemistry and proton-dopant association in BaZrO3 and BaPrO3. J Mater Chem, 2010, 20: 6258–626410.1039/c0jm00328j ↗
13. Tao S, Irvine JTS. Conductivity studies of dense yttrium-doped BaZrO3 sintered at 1325°C. J Solid State Chem, 2007, 180: 3493–350310.1016/j.jssc.2007.09.027 ↗
14. Yamazaki Y, Hernandez-Sanchez R, Haile SM. High total proton conductivity in large-grained yttrium-doped barium zirconate. Chem Mater, 2009, 21: 2755–276210.1021/cm900208w ↗
15. Fabbri E, Bi L, Pergolesi D, et al. Towards the next generation of solid oxide fuel cells operating below 600°C with chemically stable proton-conducting electrolytes. Adv Mater, 2012, 24: 195–20810.1002/adma.201103102 ↗
16. Sun W, Liu M, Liu W. Chemically stable yttrium and tin co-doped barium zirconate electrolyte for next generation high performance proton-conducting solid oxide fuel cells. Adv Energ Mater, 2013, 3: 1041–105010.1002/aenm.201201062 ↗
17. Fabbri E, Licoccia S, Traversa E, et al. Composite cathodes for proton conducting electrolytes. Fuel Cells, 2009, 9: 128–13810.1002/fuce.200800126 ↗
18. Fabbri E, Pergolesi D, Traversa E. Electrode materials: a challenge for the exploitation of protonic solid oxide fuel cells. Sci Tech Adv Mater, 2010, 11: 04430110.1088/1468-6996/11/4/044301 ↗
19. Peng R, Wu T, Liu W, et al. Cathode processes and materials for solid oxide fuel cells with proton conductors as electrolytes. J Mater Chem, 2010, 20: 6218–622510.1039/c0jm00350f ↗
20. Fabbri E, Markus I, Bi L, et al. Tailoring mixed proton-electronic conductivity of BaZrO3 by Y and Pr co-doping for cathode application in protonic SOFCs. Solid State Ion, 2011, 202: 30–3510.1016/j.ssi.2011.08.019 ↗
21. Fabbri E, Bi L, Pergolesi D, et al. High-performance composite cathodes with tailored mixed conductivity for intermediate temperature solid oxide fuel cells using proton conducting electrolytes. Energ Environ Sci, 2011, 4: 4984–499310.1039/c1ee02361f ↗
22. Fabbri E, Bi L, Tanaka H, et al. Chemically stable Pr and Y codoped barium zirconate electrolytes with high proton conductivity for intermediate-temperature solid oxide fuel cells. Adv Funct Mater, 2011, 21: 158–16610.1002/adfm.201001540 ↗
23. Fabbri E, Bi L, Rupp JLM, et al. Electrode tailoring improves the intermediate temperature performance of solid oxide fuel cells based on a Y and Pr co-doped barium zirconate proton conducting electrolyte. RSC Adv, 2011, 1: 1183–118610.1039/c1ra00545f ↗
24. Ahn JS, Pergolesi D, Camaratta MA, et al. High-performance bilayered electrolyte intermediate temperature solid oxide fuel cells. Electrochem Commun, 2009, 11: 1504–150710.1016/j.elecom.2009.05.041 ↗
25. Yan XL, Hino R (eds.). Nuclear Hydrogen Production Handbook. Boca Raton: CRC Press, 2011, 716
26. Jiang SP. Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: advances and challenges. Int J Hydrogen Energ, 2012, 37: 449–47010.1016/j.ijhydene.2011.09.067 ↗
27. Malzbender J, Batfalsky P, Vaßen R, et al. Component interactions after long-term operation of an SOFC stack with LSM cathode. J Power Sources, 2012, 201: 196–20310.1016/j.jpowsour.2011.10.117 ↗
28. Jiang SP. Issues on development of (La,Sr)MnO3 cathode for solid oxide fuel cells. J Power Sources, 2003, 124: 390–40210.1016/S0378-7753(03)00814-0 ↗
29. Chen K, Ai N, Zhao L, et al. Effect of volatile boron species on the electrocatalytic activity of cathodes of solid oxide fuel cells: I. (La, Sr)MnO3 based electrodes. J Electrochem Soc, 2013, 160: F183–F19010.1149/2.007303jes ↗
30. Kilner JA, Burriel M. Materials for intermediate-temperature solidoxide fuel cells. Annu Rev Mater Res, 2014, 44: 365–39310.1146/annurev-matsci-070813-113426 ↗
31. Peng C, Melnik J, Li J, et al. ZnO-doped BaZr0.85Y0.15O3−δ protonconducting electrolytes: characterization and fabrication of thin films. J Power Sources, 2009, 190: 447–45210.1016/j.jpowsour.2009.01.020 ↗
32. Da'as EH, Irvine JTS, Traversa E, et al. Controllable impregnation via inkjet printing for the fabrication of solid oxide cell air electrodes. ECS Trans, 2013, 57: 1851–185710.1149/05701.1851ecst ↗
33. Bi L, Traversa E. Synthesis strategies for improving the performance of doped-BaZrO3 materials in solid oxide fuel cell applications. J Mater Res, 2014, 29: 1–1510.1557/jmr.2013.205 ↗
34. Jiang SP. A review of wet impregnation—an alternative method for the fabrication of high performance and nano-structured electrodes of solid oxide fuel cells. Mater Sci Eng-A, 2006, 418: 199–21010.1016/j.msea.2005.11.052 ↗
35. Liu Z, Liu B, Ding D, et al. Fabrication and modification of solid oxide fuel cell anodes via wet impregnation/infiltration technique. J Power Sources, 2013, 237: 243–25910.1016/j.jpowsour.2013.03.025 ↗
36. Adler SB. Factors governing oxygen reduction in solid oxide fuel cell cathodes. Chem Rev, 2004, 104: 4791–484410.1021/cr020724o ↗
37. Sun Z, Fabbri E, Bi L, et al. Lowering grain boundary resistance of BaZr0.8Y0.2O3−δwith LiNO3 sintering-aid improves proton conductivity for fuel cell operation. Phys Chem Chem Phys, 2011, 13: 7692–770010.1039/C0CP01470B ↗
38. Sun W, Yan L, Shi Z, et al. Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8 Y0.2O3−δ electrolyte membrane. J Power Sources, 2010, 195: 4727–473010.1016/j.jpowsour.2010.02.012 ↗
39. Bi L, Fabbri E, Sun Z, et al. Sinteractive anodic powders improve densification and electrochemical properties of BaZr0.8Y0.2O3−δ electrolyte films for anode-supported solid oxide fuel cells. Energ Environ Sci, 2011, 4: 1352–135710.1039/c0ee00387e ↗
40. Pergolesi D, Fabbri E, Traversa E. Chemically stable anode-supported solid oxide fuel cells based on Y-doped barium zirconate thin films having improved performance. Electrochem Commun, 2010, 12: 977–98010.1016/j.elecom.2010.05.005 ↗
41. Bi L, Fabbri E, Sun Z, et al. A novel ionic diffusion strategy to fabricate high-performance anode-supported solid oxidefuel cells (SOFCs) with proton-conducting Y-doped BaZrO3 films. Energ Environ Sci, 2011, 4: 409–41210.1039/C0EE00353K ↗
42. Liu Y, Ran R, Tade MO, et al. Structure, sinterability, chemical stability and conductivity of proton-conducting BaZr0.6M0.2Y0.2O3−δ electrolyte membranes: the effect of the M dopant. J Membrane Sci, 2014, 467: 100–10810.1016/j.memsci.2014.05.020 ↗
43. Bi L, Fabbri E, Sun Z, et al. Sinteractivity, proton conductivity and chemical stability of BaZr0.7In0.3O3−δ for solid oxide fuel cells (SOFCs). Solid State Ion, 2011, 196: 59–6410.1016/j.ssi.2011.06.014 ↗
44. Matsumoto H, Sakai T, Okuyama Y. Proton-conducting oxide and applications to hydrogen energy devices. Pure Appl Chem, 2012, 85
45. Duan C, Tong J, Shang M, et al. Readily processed protonic ceramic fuel cells with high performance at low temperatures. Science, 2015, 349: 1321–132610.1126/science.aab3987 ↗
46. Ciria D, Ben Hassine M, Jiménez-Melendo M, et al. Mechanical degradation under hydrogen of yttrium doped barium zirconate electrolyte material prepared with NiO additive. J Power Sources, 2016, 321: 226–23210.1016/j.jpowsour.2016.05.001 ↗
47. Bae K, Jang DY, Choi HJ, et al. Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells. Nat Commun, 2017, 8: 1455310.1038/ncomms14553 ↗
48. Niu Y, Zhou W, Sunarso J, et al. High performance cobalt-free perovskite cathode for intermediate temperature solid oxide fuel cells. J Mater Chem, 2010, 20: 9619–962210.1039/c0jm02816a ↗
49. Zhang C, Zhao H. A novel cobalt-free cathode material for protonconducting solid oxide fuel cells. J Mater Chem, 2012, 22: 18387–1839410.1039/c2jm32627b ↗
50. Saranya AM, Pla D, Morata A, et al. Engineering mixed ionic electronic conduction in La0.8Sr0.2MnO3+δ nanostructures through fast grain boundary oxygen diffusivity. Adv Energ Mater, 2015, 5: 150037710.1002/aenm.201500377 ↗
51. Navickas E, Huber TM, Chen Y, et al. Fast oxygen exchange and diffusion kinetics of grain boundaries in Sr-doped LaMnO3 thin films. Phys Chem Chem Phys, 2015, 17: 7659–766910.1039/C4CP05421K ↗