Green light-emitting diode from bromine based organic-inorganic halide perovskite
Source abstract
Abstract
Org anic-inorganic halide perovskites have attracted considerable attention owing to their outstanding solar cell efficiency. Meanwhile, these halide perovskites exhibit good light emitting in visible and near-infrared range with high fluorescence quantum yield, resulting in electroluminescence. However, it remains challenging for lighting and display due to the low luminance and poor long-term stability. Herein, high performance green light-emitting diodes are fabricated from bromine based perovskite (CH 3 NH 3 PbBr 3 ) by systematically adjusting the preparation conditions and optimizing the emitting layer thickness. A high luminance up to 1500 cd m -2 (one of the highest values for perovskites-based light-emitting diodes) was achieved with 80 nm perovskites-emitting layer, due to the well-crystallized, full-coverage property of the films. This result further confirms the great prospect of organic-inorganic perovskites in optoelectronics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Burschka J, Pellet N, Moon SJ, et al. Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature, 2013, 499: 316–31910.1038/nature12340 ↗
2. Crossland EJ, Noel N, Sivaram V, et al. Mesoporous TiO2 single crystals delivering enhanced mobility and optoelectronic device performance. Nature, 2013, 495: 215–21910.1038/nature11936 ↗
3. Liu M, Johnston MB, Snaith HJ. Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature, 2013, 501: 395–39810.1038/nature12509 ↗
4. Jeon NJ, Noh JH, Yang WS, et al. Compositional engineering of perovskite materials for high-performance solar cells. Nature, 2015, 517: 476–48010.1038/nature14133 ↗
5. Heo JH, Im SH, Noh JH, et al. Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors. Nat Photonics, 2013, 7: 486–49110.1038/nphoton.2013.80 ↗
6. Mei A, Li X, Liu L, et al. A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability. Science, 2014, 345: 295–29810.1126/science.1254763 ↗
7. Conings B, Baeten L, De Dobbelaere C, et al. Perovskite-based hybrid solar cells exceeding 10% efficiency with high reproducibility using a thin film sandwich approach. Adv Mater, 2013, 26: 2041–204610.1002/adma.201304803 ↗
8. Kazim S, Nazeeruddin MK, Gratzel M, et al. Perovskite as light harvester: a game changer in photovoltaics. Angew Chem Int Ed, 2014, 53: 2812–282410.1002/anie.201308719 ↗
9. Park NG. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell. J Phys Chem Lett, 2013, 4: 2423–242910.1021/jz400892a ↗
10. Docampo P, Guldin S, Leijtens T, et al. Lessons learned: from dye-sensitized solar cells to all-solid-state hybrid devices. Adv Mater, 2014, 26: 4013–403010.1002/adma.201400486 ↗
11. Xing GC, Sun SY, Lim SS, et al. Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI3. Science, 2013, 342: 344–34710.1126/science.1243167 ↗
12. Stranks SD, Grancini G, Menelaou C, et al. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science, 2013, 342: 341–34410.1126/science.1243982 ↗
13. Edri E, Kirmayer S, Henning A, et al. Why lead methylammonium triiodide perovskite-based solar cells require a mesoporous electron transporting scaffold (but not necessarily a hole conductor). Nano Lett, 2014, 14: 1000–100410.1021/nl404454h ↗
14. Zhao Y, Nardes AM, Zhu K. Solid-state mesostructured perovskite CH3NH3PbI3 solar cells: charge transport, recombination, and diffusion length. J Phys Chem Lett, 2014, 5: 490–49410.1021/jz500003v ↗
15. Ponseca CS, Savenije TJ, Abdellah M, et al. Organometal halide perovskite solar cell materials rationalized: ultrafast charge generation, high and microsecond-long balanced mobilities, and slow recombination. J Am Chem Soc, 2014, 136: 5189–519210.1021/ja412583t ↗
16. Stoumpos CC, Malliakas CD, Kanatzidis MG, et al. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties. Inorg Chem, 2013, 52: 9019–903810.1021/ic401215x ↗
17. Wehrenfennig C, Eperon GE, Johnston MB, et al. High charge carrier mobilities and lifetimes in organolead trihalide Perovskites. Adv Mater, 2014, 26: 1584–158910.1002/adma.201305172 ↗
18. Jung HS, Park NG. Perovskite solar cells: from materials to devices. Small, 2015, 11: 10–2510.1002/smll.201402767 ↗
19. Xing G, Mathews N, Lim SS, et al. Low-temperature solution-processed wavelength-tunable perovskites for lasing. Nat Mater, 2014, 13: 476–48010.1038/nmat3911 ↗
20. Zhang Q, Ha ST, Liu X, et al. Room-temperature near-infrared high-Q perovskite whispering-gallery planar nanolasers. Nano Lett, 2014, 10: 5995–600110.1021/nl503057g ↗
21. Wehrenfennig C, Liu M, Snaith HJ, et al. Homogeneous emission line broadening in the organo lead halide perovskite CH3NH3PbI3−x Clx. J Phys Chem Lett, 2014, 5: 1300–130610.1021/jz500434p ↗
22. Ha ST, Liu X, Zhang Q, et al. Synthesis of organic —inorganic lead halide perovskite nanoplatelets: towards high-performance perovskite solar cells and optoelectronic devices. Adv Opt Mater, 2014, 2: 838–84410.1002/adom.201400106 ↗
23. Tan ZK, Moghaddam RS, Lai ML, et al. Bright light-emitting diodes based on organometal halide perovskite. Nat Nanotechnol, 2014, 9: 687–69210.1038/nnano.2014.149 ↗
24. Kim YH, Cho H, Heo JH, et al. Multicolored organic/inorganic hybrid perovskite light-emitting diodes. Adv Mater, doi: 10.1002/adma.20140375110.1002/adma.201403751 ↗
25. Jeon NJ, Noh JH, Kim YC, et al. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. Nat Mater, 2014, 13: 897–90310.1038/nmat4014 ↗
26. Chen Q, Zhou H, Hong Z, et al. Planar heterojunction perovskite solar cells via vapor assisted solution process. J Am Chem Soc, 2014, 136: 622–62510.1021/ja411509g ↗
27. Edri E, Kirmayer S, Kulbak M, et al. Chloride inclusion and hole transport material doping to improve methyl ammonium lead bromide perovskite-based high open-circuit voltage solar cells. J Phys Chem Lett, 2014, 5: 429–43310.1021/jz402706q ↗
28. Noh JH, Im SH, Heo JH, et al. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells. Nano Lett, 2013, 13: 1764–176910.1021/nl400349b ↗
29. Toshiaki H, Masanao E, Tetsuo T, et al. Highly efficient electroluminescence from a heterostructure device combined with emissive layered-perovskite and an electron-transporting organic compound. Chem Phys Lett, 1996, 254: 103–10810.1016/0009-2614(96)00310-7 ↗
30. Era M, Morimoto S, Tsutsui T, Saito S. Organic-inorganic heterostructure electroluminescent device using a layered perovskite semiconductor (C6H5C2H4NH3)2PbI4. Appl Phys Lett, 1994, 65: 676–67810.1063/1.112265 ↗
31. Wei Z, Yan K, Chen H, et al. Cost-efficient clamping solar cells using candle soot for hole extraction from ambipolar perovskites. Energ Environ Sci, 2014, 7: 3326–333310.1039/C4EE01983K ↗