journal article·2021-03Open access

Sodium ion storage performance and mechanism in orthorhombic V2O5 single-crystalline nanowires

Yanwei Li, Jingcheng Ji, Jinhuan Yao, Ying Zhang, Bin Huang, Guozhong Cao

Science China Materials· Volume 64· Issue 3

Abstract

深入理解电极的电化学反应过程和机理对高性能电极材料 的设计、开发至关重要. 本文研究了正交相V2O5单晶纳米线在1.0–4.0 V (vs. Na/Na+)电位窗口下的钠离子存储行为和机理. 该单晶纳 米线在首次放电/充电循环中表现出高的不可逆容量损失, 在随后 的循环中表现出良好的循环稳定性. 在100 mA g−1电流密度下, 其 初始放电和充电比容量分别为217和88 mA h g−1, 对应的库伦效率 仅为40.5%. 经过100次循环后, 其可逆放电容量保持在78 mA h g−1, 与第二次放电容量相比其每圈循环衰减率仅为0.09%. 采用循环伏 安(CV)、非原位X-射线衍射(ex-situ XRD)、扫描电镜(SEM)和透 射电镜(TEM)表征, 分析了正交相V2O5单晶纳米线的钠离子存储 机理, 发现V2O5单晶纳米线在首次循环中的高不可逆容量损失主 要是因为其在放电过程中生成了钠离子无法脱出的α′-NaxV2O5 (0.02 < x< 0.88) 单晶相. 该α′-Na0.88V2O5可通过单相(固溶体)反应 可逆地嵌入和脱出钠离子, 因此在后续循环中表现出优异的稳定 性. 采用恒电流间歇电位滴定(GITT)分析发现, α′-NaxV2O5中钠离 子扩散系数值为10−12–10−11.5 cm2 s−1.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Transition Metal Oxide Nanomaterials · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Zubi G, Dufo-López R, Carvalho M, et al. The lithium-ion battery: State of the art and future perspectives. Renew Sustain Energy Rev, 2018, 89: 292–30810.1016/j.rser.2018.03.002 ↗
2. Li M, Lu J, Chen Z, et al. 30 Years of lithium-ion batteries. Adv Mater, 2018, 30: 180056110.1002/adma.201800561 ↗
3. Massé RC, Uchaker E, Cao G. Beyond li-ion: Electrode materials for sodium- and magnesium-ion batteries. Sci China Mater, 2015, 58: 715–76610.1007/s40843-015-0084-8 ↗
4. Vaalma C, Buchholz D, Weil M, et al. A cost and resource analysis of sodium-ion batteries. Nat Rev Mater, 2018, 3: 1801310.1038/natrevmats.2018.13 ↗
5. Hwang JY, Myung ST, Sun YK. Sodium-ion batteries: Present and future. Chem Soc Rev, 2017, 46: 3529–361410.1039/C6CS00776G ↗
6. Su H, Jaffer S, Yu H. Transition metal oxides for sodium-ion batteries. Energy Storage Mater, 2016, 5: 116–13110.1016/j.ensm.2016.06.005 ↗
7. Sun Y, Guo S, Zhou H. Exploration of advanced electrode materials for rechargeable sodium-ion batteries. Adv Energy Mater, 2018, 9: 180021210.1002/aenm.201800212 ↗
8. Liu Q, Hu Z, Chen M, et al. Recent progress of layered transition metal oxide cathodes for sodium-ion batteries. Small, 2019, 15: 180538110.1002/smll.201805381 ↗
9. Zhao LN, Zhang T, Zhao HL, et al. Polyanion-type electrode materials for advanced sodium-ion batteries. Mater Today Nano, 2020, 10: 10007210.1016/j.mtnano.2020.100072 ↗
10. Qian J, Wu C, Cao Y, et al. Prussian blue cathode materials for sodium-ion batteries and other ion batteries. Adv Energy Mater, 2018, 8: 170261910.1002/aenm.201702619 ↗
11. Yin X, Sarkar S, Shi S, et al. Recent progress in advanced organic electrode materials for sodium-ion batteries: synthesis, mechanisms, challenges and perspectives. Adv Funct Mater, 2020, 30: 190844510.1002/adfm.201908445 ↗
12. Wang Q, Xu J, Zhang W, et al. Research progress on vanadium-based cathode materials for sodium ion batteries. J Mater Chem A, 2018, 6: 8815–883810.1039/C8TA01627E ↗
13. Liu P, Zhu K, Gao Y, et al. Recent progress in the applications of vanadium-based oxides on energy storage: From low-dimensional nanomaterials synthesis to 3D micro/nano-structures and freestanding electrodes fabrication. Adv Energy Mater, 2017, 7: 170054710.1002/aenm.201700547 ↗
14. Xu X, Xiong F, Meng J, et al. Vanadium-based nanomaterials: a promising family for emerging metal-ion batteries. Adv Funct Mater, 2020, 30: 190439810.1002/adfm.201904398 ↗
15. Etman AS, Sun J, Younesi R. V2O5·nH2O nanosheets and multi-walled carbon nanotube composite as a negative electrode for sodium-ion batteries. J Energy Chem, 2019, 30: 145–15110.1016/j.jechem.2018.04.011 ↗
16. Dong J, Jiang Y, Wei Q, et al. Strongly coupled pyridine-V2O5· nH2O nanowires with intercalation pseudocapacitance and stabilized layer for high energy sodium ion capacitors. Small, 2019, 15: 190037910.1002/smll.201900379 ↗
17. Cai Y, Fang G, Zhou J, et al. Metal-organic framework-derived porous shuttle-like vanadium oxides for sodium-ion battery application. Nano Res, 2018, 11: 449–46310.1007/s12274-017-1653-9 ↗
18. Yao J, Li Y, Massé RC, et al. Revitalized interest in vanadium pentoxide as cathode material for lithium-ion batteries and beyond. Energy Storage Mater, 2018, 11: 205–25910.1016/j.ensm.2017.10.014 ↗
19. Ali G, Lee JH, Oh SH, et al. Investigation of the Na intercalation mechanism into nanosized V2O5/C composite cathode material for Na-ion batteries. ACS Appl Mater Interfaces, 2016, 8: 6032–603910.1021/acsami.5b11954 ↗
20. West K. Sodium insertion in vanadium oxides. Solid State Ion, 1988, 28–30: 1128–113110.1016/0167-2738(88)90343-8 ↗
21. Su DW, Dou SX, Wang GX. Hierarchical orthorhombic V2O5 hollow nanospheres as high performance cathode materials for sodium-ion batteries. J Mater Chem A, 2014, 2: 11185–1119410.1039/c4ta01751j ↗
22. Muller-Bouvet D, Baddour-Hadjean R, Tanabe M, et al. Electrochemically formed a’-NaV2O5: A new sodium intercalation compound. Electrochim Acta, 2015, 176: 586–59310.1016/j.electacta.2015.07.030 ↗
23. Si H, Seidl L, Chu EML, et al. Impact of the morphology of V2O5 electrodes on the electrochemical Na-ion intercalation. J Electrochem Soc, 2018, 165: A2709–A271710.1149/2.0621811jes ↗
24. Zhai T, Liu H, Li H, et al. Centimeter-long V2O5 nanowires: From synthesis to field-emission, electrochemical, electrical transport, and photoconductive properties. Adv Mater, 2010, 22: 2547–255210.1002/adma.200903586 ↗
25. Zhou F, Zhao X, Yuan C, et al. Vanadium pentoxide nanowires: Hydrothermal synthesis, formation mechanism, and phase control parameters. Cryst Growth Des, 2007, 8: 723–72710.1021/cg060816x ↗
26. Li Y, Yao J, Uchaker E, et al. Sn-doped V2O5 film with enhanced lithium-ion storage performance. J Phys Chem C, 2013, 117: 23507–2351410.1021/jp406927m ↗
27. Yao JH, Yin ZL, Zou ZG, et al. Y-doped V2O5 with enhanced lithium storage performance. RSC Adv, 2017, 7: 32327–3233510.1039/C7RA03885B ↗
28. Li Y, Liu C, Xie Z, et al. Superior sodium storage performance of additive-free V2O5 thin film electrodes. J Mater Chem A, 2017, 5: 16590–1659410.1039/C7TA05007K ↗
29. Liu Y, Clark M, Zhang Q, et al. V2O5 nano-electrodes with high power and energy densities for thin film Li-ion batteries. Adv Energy Mater, 2011, 1: 194–20210.1002/aenm.201000037 ↗
30. Fontenot CJ, Wiench JW, Pruski M, et al. Vanadia gel synthesis via peroxovanadate precursors. 1. In situ laser Raman and 51V NMR characterization of the gelation process. J Phys Chem B, 2000, 104: 11622–1163110.1021/jp0021897 ↗
31. Rui X, Tang Y, Malyi OI, et al. Ambient dissolution-recrystallization towards large-scale preparation of V2O5 nanobelts for high-energy battery applications. Nano Energy, 2016, 22: 583–59310.1016/j.nanoen.2016.03.001 ↗
32. Petkov V, Trikalitis PN, Bozin ES, et al. Structure of V2O5·nH2O xerogel solved by the atomic pair distribution function technique. J Am Chem Soc, 2002, 124: 10157–1016210.1021/ja026143y ↗
33. Dewangan K, Sinha NN, Chavan PG, et al. Synthesis and characterization of self-assembled nanofiber-bundles of V2O5: Their electrochemical and field emission properties. Nanoscale, 2012, 4: 645–65110.1039/C1NR11444A ↗
34. Mai L, Xu L, Han C, et al. Electrospun ultralong hierarchical vanadium oxide nanowires with high performance for lithium ion batteries. Nano Lett, 2010, 10: 4750–475510.1021/nl103343w ↗
35. Takahashi K, Limmer SJ, Wang Y, et al. Synthesis and electrochemical properties of single-crystal V2O5 nanorod arrays by template-based electrodeposition. J Phys Chem B, 2004, 108: 9795–980010.1021/jp0491820 ↗
36. Shi S, Cao M, He X, et al. Surfactant-assisted hydrothermal growth of single-crystalline ultrahigh-aspect-ratio vanadium oxide nanobelts. Cryst Growth Des, 2007, 7: 1893–189710.1021/cg060847s ↗
37. Pan S, Chen L, Li Y, et al. Disodium citrate-assisted hydrothermal synthesis of V2O5 nanowires for high performance supercapacitors. RSC Adv, 2018, 8: 3213–321710.1039/C7RA12607G ↗
38. Van Nghia N, Long PD, Tan TA, et al. Electrochemical performance of a V2O5 cathode for a sodium ion battery. J Electr Materi, 2017, 46: 3689–369410.1007/s11664-017-5298-y ↗
39. Leger C, Bach S, Soudan P, et al. Structural and electrochemical properties of ω-LixV2O5 (0.4≤x≤3) as rechargeable cathodic material for lithium batteries. J Electrochem Soc, 2005, 152: A23610.1149/1.1836155 ↗
40. Li Y, Huang Y, Zheng Y, et al. Facile and efficient synthesis of α-Fe2O3 nanocrystals by glucose-assisted thermal decomposition method and its application in lithium ion batteries. J Power Sources, 2019, 416: 62–7110.1016/j.jpowsour.2019.01.080 ↗
41. Huang Y, Li Y, Huang R, et al. Ternary Fe2O3/Fe3O4/FeCO3 composite as a high-performance anode material for lithium-ion batteries. J Phys Chem C, 2019, 123: 12614–1262210.1021/acs.jpcc.9b02132 ↗
42. Wang J, Luo N, Wu J, et al. Hierarchical spheres constructed by ultrathin VS2 nanosheets for sodium-ion batteries. J Mater Chem A, 2019, 7: 3691–369610.1039/C8TA11950C ↗
43. Luo Y, Xu X, Tian X, et al. Facile synthesis of a Co3V2O8 interconnected hollow microsphere anode with superior high-rate capability for Li-ion batteries. J Mater Chem A, 2016, 4: 5075–508010.1039/C6TA01339B ↗
44. Zhen M, Guo X, Gao G, et al. Rutile TiO2 nanobundles on reduced graphene oxides as anode materials for Li ion batteries. Chem Commun, 2014, 50: 11915–1191810.1039/C4CC05480F ↗
45. Liu X, Zhang J, Si W, et al. High-rate amorphous SnO2 nanomembrane anodes for Li-ion batteries with a long cycling life. Nanoscale, 2015, 7: 282–28810.1039/C4NR04903A ↗
46. Ou X, Li J, Zheng F, et al. In situ X-ray diffraction characterization of NiSe2 as a promising anode material for sodium ion batteries. J Power Sources, 2017, 343: 483–49110.1016/j.jpowsour.2017.01.097 ↗
47. Wei Q, Liu J, Feng W, et al. Hydrated vanadium pentoxide with superior sodium storage capacity. J Mater Chem A, 2015, 3: 8070–807510.1039/C5TA00502G ↗
48. Raju V, Rains J, Gates C, et al. Superior cathode of sodium-ion batteries: orthorhombic V2O5 nanoparticles generated in nanoporous carbon by ambient hydrolysis deposition. Nano Lett, 2014, 14: 4119–412410.1021/nl501692p ↗
49. Uchaker E, Cao G. The role of intentionally introduced defects on electrode materials for alkali-ion batteries. Chem Asian J, 2015, 10: 1608–161710.1002/asia.201500401 ↗
50. Maier J. Review—battery materials: Why defect chemistry? J Electrochem Soc, 2015, 162: A2380–A238610.1149/2.0011514jes ↗
51. Liu Y, Liu D, Zhang Q, et al. Engineering nanostructured electrodes away from equilibrium for lithium-ion batteries. J Mater Chem, 2011, 21: 9969–998310.1039/c0jm04240d ↗
52. Qin M, Liang Q, Pan A, et al. Template-free synthesis of vanadium oxides nanobelt arrays as high-rate cathode materials for lithium ion batteries. J Power Sources, 2014, 268: 700–70510.1016/j.jpowsour.2014.06.103 ↗
53. Liang S, Hu Y, Nie Z, et al. Template-free synthesis of ultra-large V2O5 nanosheets with exceptional small thickness for high-performance lithium-ion batteries. Nano Energy, 2015, 13: 58–6610.1016/j.nanoen.2015.01.049 ↗
54. An Q, Wei Q, Zhang P, et al. Three-dimensional interconnected vanadium pentoxide nanonetwork cathode for high-rate long-life lithium batteries. Small, 2015, 11: 2654–266010.1002/smll.201403358 ↗
55. Carrasco J. Role of van der Waals forces in thermodynamics and kinetics of layered transition metal oxide electrodes: alkali and alkaline-earth ion insertion into V2O5. J Phys Chem C, 2014, 118: 19599–1960710.1021/jp505821w ↗
56. Liu J, Wang J, Xu C, et al. Advanced energy storage devices: Basic principles, analytical methods, and rational materials design. Adv Sci, 2018, 5: 170032210.1002/advs.201700322 ↗
57. Liu C, Yao J, Zou Z, et al. Boosting the cycling stability of hydrated vanadium pentoxide by Y3+ pillaring for sodium-ion batteries. Mater Today Energy, 2019, 11: 218–22710.1016/j.mtener.2018.12.003 ↗
58. Wang L, Wang Y, Zhao Y. Freeze-drying method to synthesize V2O5/graphene composites toward enhanced sodium ion storage. Ceramics Int, 2018, 44: 23279–2328310.1016/j.ceramint.2018.08.344 ↗
59. Lim SJ, Han DW, Nam DH, et al. Structural enhancement of Na3V2(PO4)3/C composite cathode materials by pillar ion doping for high power and long cycle life sodium-ion batteries. J Mater Chem A, 2014, 2: 19623–1963210.1039/C4TA03948C ↗
60. Shang C, Hu L, Lin Q, et al. Integration of NaV6O15·nH2O nanowires and rGO as cathode materials for efficient sodium storage. Appl Surf Sci, 2019, 494: 458–46410.1016/j.apsusc.2019.07.192 ↗
61. Song X, Li J, Li Z, et al. Superior sodium storage of carbon-coated NaV6O15 nanotube cathode: pseudocapacitance versus intercalation. ACS Appl Mater Interfaces, 2019, 11: 10631–1064110.1021/acsami.8b20494 ↗
62. Pereira-Ramos JP, Messina R, Perichon J. Electrochemical formation of vanadium pentoxide bronzes MxV2O5 in molten dimethylsulfone. J Electrochem Soc, 1988, 135: 3050–305710.1149/1.2095486 ↗
63. Ma W, Zhang C, Liu C, et al. Impacts of surface energy on lithium ion intercalation properties of V2O5. ACS Appl Mater Interfaces, 2016, 8: 19542–1954910.1021/acsami.6b06359 ↗
64. Uchaker E, Zheng YZ, Li S, et al. Better than crystalline: Amorphous vanadium oxide for sodium-ion batteries. J Mater Chem A, 2014, 2: 18208–1821410.1039/C4TA03788J ↗
65. Zhu Y, Gao T, Fan X, et al. Electrochemical techniques for intercalation electrode materials in rechargeable batteries. Acc Chem Res, 2017, 50: 1022–103110.1021/acs.accounts.7b00031 ↗
66. Weppner W, Huggins RA. Determination of the kinetic parameters of mixed-conducting electrodes and application to the system Li3Sb. J Electrochem Soc, 1977, 124: 1569–157810.1149/1.2133112 ↗
67. Lee JH, Kim JM, Kim JH, et al. Toward ultrahigh-capacity V2O5 lithium-ion battery cathodes via one-pot synthetic route from precursors to electrode sheets. Adv Mater Interfaces, 2016, 3: 160017310.1002/admi.201600173 ↗
68. Attias R, Salama M, Hirsch B, et al. Solvent effects on the reversible intercalation of magnesium-ions into V2O5 electrodes. ChemElectroChem, 2018, 5: 3514–352410.1002/celc.201800932 ↗