journal article·2020-09Open access

Fast and stable Mg2+ intercalation in a high voltage NaV2O2(PO4)2F/rGO cathode material for magnesium-ion batteries

Junjun Wang, Shuangshuang Tan, Guobin Zhang, Yalong Jiang, Yameng Yin, Fangyu Xiong, Qidong Li, Dan Huang, Qinghua Zhang, Lin Gu, Qinyou An, Liqiang Mai

Science China Materials· Volume 63· Issue 9

Abstract

Sluggish kinetics of Mg2+ intercalation and low working potential seriously hinder the development of high-energy-density magnesium-ion batteries (MIBs). Hence developing cathode materials with fast Mg2+ diffusion and high working voltage is a key to overcome the obstacles in MIBs. Herein, a tetragonal NaV2O2(PO4)2F/reduced graphene oxide (rGO) is proposed as an effective Mg2+ host for the first time. It exhibits the highest average discharge voltage (3.3 V vs. Mg2+/Mg), fast diffusion kinetics of Mg2+ with the average diffusivity of 2.99×10−10 cm2 s−1, and ultralong cycling stability (up to 9500 cycles). The Mg2+ storage mechanism ofNaV2O2(PO4)2F/rGO is demonstrated as a single-phase (de)intercalation reaction by in situ X-ray diffraction (XRD) technology. Density functional theory (DFT) computations further reveal that Mg2+ ions tend to migrate along the a direction. X-ray absorption near edge structure (XANES) demonstrates a decrease in the average valence of vanadium, and the local coordination environment around vanadium site is highly conserved after magnesiation. Moreover, the assembled NaV2O2(PO4)2F//Mg0.79NaTi2(PO4)3 Mg-ion full cell exhibits high power and energy densities, which indicates thatNaV2O2(PO4)2F/rGO owns potential for practical applications. This work achieves a breakthrough in the working voltage of cathode materials for MIBs and provides a new opportunity for high-energy-density MIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Layered Double Hydroxides Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Yoo HD, Shterenberg I, Gofer Y, et al. Mg rechargeable batteries: An on-going challenge. Energy Environ Sci, 2013, 6: 2265–227910.1039/c3ee40871j ↗
2. Muldoon J, Bucur CB, Oliver AG, et al. Electrolyte roadblocks to a magnesium rechargeable battery. Energy Environ Sci, 2012, 5: 5941–595010.1039/c2ee03029b ↗
3. Ling C, Banerjee D, Matsui M. Study of the electrochemical deposition of M. in the atomic level: Why it prefers the non-dendritic morphology. Electrochim Acta, 2012, 76: 270–27410.1016/j.electacta.2012.05.001 ↗
4. Wang Y, Chen R, Chen T, et al. Emerging non-lithium ion batteries. Energy Storage Mater, 2016, 4: 103–12910.1016/j.ensm.2016.04.001 ↗
5. Aurbach D, Lu Z, Schechter A, et al. Prototype systems for rechargeable magnesium batteries. Nature, 2000, 407: 724–72710.1038/35037553 ↗
6. Andrews JL, Mukherjee A, Yoo HD, et al. Reversible Mg-ion insertion in a metastable one-dimensional polymorph of V2O5. Chem, 2018, 4: 564–58510.1016/j.chempr.2017.12.018 ↗
7. Kim JS, Chang WS, Kim RH, et al. High-capacity nanostructured manganese dioxide cathode for rechargeable magnesium ion batteries. J Power Sources, 2015, 273: 210–21510.1016/j.jpowsour.2014.07.162 ↗
8. Liang Y, Feng R, Yang S, et al. Rechargeable M. batteries with graphene-like MoS2 cathode and ultrasmall M. nanoparticle anode. Adv Mater, 2011, 23: 640–64310.1002/adma.201003560 ↗
9. Xue X, Chen R, Yan C, et al. One-step synthesis of 2-ethylhexylamine pillared vanadium disulfide nanoflowers with ultralarge interlayer spacing for high-performance magnesium storage. Adv Energy Mater, 2019, 9: 190014510.1002/aenm.201900145 ↗
10. Tang H, Xu N, Pei C, et al. H2V3O8 nanowires as high-capacity cathode materials for magnesium-based battery. ACS Appl Mater Interfaces, 2017, 9: 28667–2867310.1021/acsami.7b09924 ↗
11. Yoo HD, Liang Y, Dong H, et al. Fast kinetics of magnesium monochloride cations in interlayer-expanded titanium disulfide for magnesium rechargeable batteries. Nat Commun, 2017, 8: 33910.1038/s41467-017-00431-9 ↗
12. Zhou L, Liu Q, Zhang Z, et al. Interlayer-spacing-regulated VOPO4 nanosheets with fast kinetics for high-capacity and durable rechargeable magnesium batteries. Adv Mater, 2018, 30: 180198410.1002/adma.201801984 ↗
13. Zeng J, Yang Y, Lai S, et al. A promising high-voltage cathode material based on mesoporous Na3V2(PO4)3/C for rechargeable magnesium batteries. Chem Eur J, 2017, 23: 16898–1690510.1002/chem.201704303 ↗
14. Huang ZD, Masese T, Orikasa Y, et al. Vanadium phosphate as a promising high-voltage magnesium ion (de)-intercalation cathode host. RSC Adv, 2015, 5: 8598–860310.1039/C4RA14416C ↗
15. Wang Y, Xue X, Liu P, et al. Atomic substitution enabled synthesis of vacancy-rich two-dimensional black TiO2−x nanoflakes for highperformance rechargeable magnesium batteries. ACS Nano, 2018, 12: 12492–1250210.1021/acsnano.8b06917 ↗
16. Li Y, Nuli YN, Yang J, et al. MgFeSiO4 prepared via a molten salt method as a new cathode material for rechargeable magnesium batteries. Chin Sci Bull, 2011, 56: 386–39010.1007/s11434-010-4247-4 ↗
17. Mizuno Y, Okubo M, Hosono E, et al. Electrochemical Mg2+ intercalation into a bimetallic CuFe Prussian blue analog in aqueous electrolytes. J Mater Chem A, 2013, 1: 1305510.1039/c3ta13205f ↗
18. Okamoto S, Ichitsubo T, Kawaguchi T, et al. Intercalation and push-out process with spinel-to-rocksalt transition on M. insertion into spinel oxides in magnesium batteries. Adv Sci, 2015, 2: 150007210.1002/advs.201500072 ↗
19. Orikasa Y, Masese T, Koyama Y, et al. High energy density rechargeable magnesium battery using earth-abundant and nontoxic elements. Sci Rep, 2015, 4: 562210.1038/srep05622 ↗
20. Wang Y, Liu Z, Wang C, et al. Highly branched VS4 nanodendrites with 1D atomic-chain structure as a promising cathode material for long-cycling magnesium batteries. Adv Mater, 2018, 30: 180256310.1002/adma.201802563 ↗
21. An Q, Li Y, Deog Yoo H, et al. Graphene decorated vanadium oxide nanowire aerogel for long-cycle-life magnesium battery cathodes. Nano Energy, 2015, 18: 265–27210.1016/j.nanoen.2015.10.029 ↗
22. Esparcia Jr. EA, Chae MS, Ocon JD, et al. Ammonium vanadium bronze (NH4V4O10) as a high-capacity cathode material for nonaqueous magnesium-ion batteries. Chem Mater, 2018, 30: 3690–369610.1021/acs.chemmater.8b00462 ↗
23. Kaveevivitchai W, Jacobson AJ. High capacity rechargeable magnesium- ion batteries based on a microporous molybdenum-vanadium oxide cathode. Chem Mater, 2016, 28: 4593–460110.1021/acs.chemmater.6b01245 ↗
24. Rasul S, Suzuki S, Yamaguchi S, et al. Manganese oxide octahedral molecular sieves as insertion electrodes for rechargeable M. batteries. Electrochim Acta, 2013, 110: 247–25210.1016/j.electacta.2013.06.094 ↗
25. Sun X, Bonnick P, Nazar LF. Layered TiS2 positive electrode for M. batteries. ACS Energy Lett, 2016, 1: 297–30110.1021/acsenergylett.6b00145 ↗
26. Kim C, Phillips PJ, Key B, et al. Direct observation of reversible magnesium ion intercalation into a spinel oxide host. Adv Mater, 2015, 27: 3377–338410.1002/adma.201500083 ↗
27. Truong QD, Devaraju MK, Honma I. Nanocrystalline MgMnSiO4 and MgCoSiO4 particles for rechargeable Mg-ion batteries. J Power Sources, 2017, 361: 195–20210.1016/j.jpowsour.2017.06.084 ↗
28. Wang RY, Wessells CD, Huggins RA, et al. Highly reversible open framework nanoscale electrodes for divalent ion batteries. Nano Lett, 2013, 13: 5748–575210.1021/nl403669a ↗
29. Yin Y, Xiong F, Pei C, et al. Robust three-dimensional graphene skeleton encapsulated Na3V2O2(PO4)2F nanoparticles as a high-rate and long-life cathode of sodium-ion batteries. Nano Energy, 2017, 41: 452–45910.1016/j.nanoen.2017.09.056 ↗
30. Xu C, Xu Y, Tang C, et al. Carbon-coated hierarchical NaTi2(PO4)3 mesoporous microflowers with superior sodium storage performance. Nano Energy, 2016, 28: 224–23110.1016/j.nanoen.2016.08.026 ↗
31. Kresse G, Joubert D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys Rev B, 1999, 59: 1758–177510.1103/PhysRevB.59.1758 ↗
32. Kresse G, Furthmüller J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys Rev B, 1996, 54: 11169–1118610.1103/PhysRevB.54.11169 ↗
33. Kresse G, Furthmüller J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput Mater Sci, 1996, 6: 15–5010.1016/0927-0256(96)00008-0 ↗
34. Perdew JP, Burke K, Ernzerhof M. Generalized gradient approximation made simple. Phys Rev Lett, 1996, 77: 3865–386810.1103/PhysRevLett.77.3865 ↗
35. Sharma N, Serras P, Palomares V, et al. Sodium distribution and reaction mechanisms of a Na3V2O2(PO4)2F electrode during use in a sodium-ion battery. Chem Mater, 2014, 26: 3391–340210.1021/cm5005104 ↗
36. Chao D, Lai CHM, Liang P, et al. Sodium vanadium fluorophosphates (NVOPF) array cathode designed for high-rate full sodium ion storage device. Adv Energy Mater, 2018, 8: 180005810.1002/aenm.201800058 ↗
37. Hou Y, Chang K, Wang Z, et al. Rapid microwave-assisted refluxing synthesis of hierarchical mulberry-shaped Na3V2(PO4)2O2 F@C as high performance cathode for sodium & lithium-ion batteries. Sci China Mater, 2019, 62: 474–48610.1007/s40843-018-9342-0 ↗
38. Ruch PW, Cericola D, Hahn M, et al. On the use of activated carbon as a quasi-reference electrode in non-aqueous electrolyte solutions. J Electroanal Chem, 2009, 636: 128–13110.1016/j.jelechem.2009.09.007 ↗
39. Gershinsky G, Yoo HD, Gofer Y, et al. Electrochemical and spectroscopic analysis of Mg2+ intercalation into thin film electrodes of layered oxides: V2O5 and MoO3. Langmuir, 2013, 29: 10964–1097210.1021/la402391f ↗
40. Zhao-Karger Z, Zhao X, Wang D, et al. Performance improvement of magnesium sulfur batteries with modified non-nucleophilic electrolytes. Adv Energy Mater, 2015, 5: 140115510.1002/aenm.201401155 ↗
41. Massa W, Yakubovich OV, Dimitrova OV. Crystal structure of a new sodium vanadyl(IV) fluoride phosphate Na3V2O2F[PO4]2. Solid State Sci, 2002, 4: 495–50110.1016/S1293-2558(02)01283-9 ↗
42. Sauvage F, Quarez E, Tarascon JM, et al. Crystal structure and electrochemical properties vs. Na+ of the sodium fluorophosphate Na1.5VOPO4F0.5. Solid State Sci, 2006, 8: 1215–122110.1016/j.solidstatesciences.2006.05.009 ↗
43. Tan S, Jiang Y, Wei Q, et al. Multidimensional synergistic nanoarchitecture exhibiting highly stable and ultrafast sodium-ion storage. Adv Mater, 2018, 30: 170712210.1002/adma.201707122 ↗
44. Jin H, Dong J, Uchaker E, et al. Three dimensional architecture of carbon wrapped multilayer Na3V2O2(PO4)2F nanocubes embedded in graphene for improved sodium ion batteries. J Mater Chem A, 2015, 3: 17563–1756810.1039/C5TA03164H ↗
45. Tong Z, Qi Y, Zhao J, et al. One-step synthesis of carbon-coated Na3(VOPO4)2F using biomass as a reducing agent and their electrochemical properties. Waste Biomass Valor, 2020, 11: 2201–220910.1007/s12649-018-0426-3 ↗
46. Deiss E. Spurious chemical diffusion coefficients of Li+ in electrode materials evaluated with GITT. Electrochim Acta, 2005, 50: 2927–293210.1016/j.electacta.2004.11.042 ↗
47. Weppner W. Determination of the kinetic parameters of mixedconducting electrodes and application to the system Li3Sb. J Electrochem Soc, 1977, 124: 156910.1149/1.2133112 ↗
48. Levi MD, Lancry E, Gizbar H, et al. Phase transitions and diffusion kinetics during Mg2+- and Li+-ion insertions into the Mo6S8 Chevrel phase compound studied by PITT. Electrochim Acta, 2004, 49: 3201–320910.1016/j.electacta.2004.02.034 ↗
49. Fichtner A, Hardtle W, Bruelheide H, et al. Neighbourhood interactions drive overyielding in mixed-species tree communities. Nat Commun, 2018, 9: 511510.1038/s41467-018-03529-w ↗
50. Henkelman G, Uberuaga BP, Jónsson H. A climbing image nudged elastic band method for finding saddle points and minimum energy paths. J Chem Phys, 2000, 113: 9901–990410.1063/1.1329672 ↗
51. Wang F, Hu E, Sun W, et al. A rechargeable aqueous Zn2+-battery with high power density and a long cycle-life. Energy Environ Sci, 2018, 11: 3168–317510.1039/C8EE01883A ↗
52. Qi Y, Tong Z, Zhao J, et al. Scalable room-temperature synthesis of multi-shelled Na3(VOPO4)2F microsphere cathodes. Joule, 2018, 2: 2348–236310.1016/j.joule.2018.07.027 ↗
53. Senguttuvan P, Rousse G, Arroyo y de Dompablo ME, et al. Lowpotential sodium insertion in a NASICON-type structure through the Ti(III)/Ti(II) redox couple. J A. Chem Soc, 2013, 135: 3897–390310.1021/ja311044t ↗
54. Chen C, Wang J, Zhao Q, et al. Layered Na2Ti3O7/MgNaTi3O7/Mg0.5NaTi3O7 nanoribbons as high-performance anode of rechargeable Mg-ion batteries. ACS Energy Lett, 2016, 1: 1165–117210.1021/acsenergylett.6b00515 ↗
55. Cheng Y, Shao Y, Parent LR, et al. Interface promoted reversible M. insertion in nanostructured tin-antimony alloys. Adv Mater, 2015, 27: 6598–660510.1002/adma.201502378 ↗
56. Nacimiento F, Cabello M, Pérez-Vicente C, et al. On the mechanism of magnesium storage in micro- and nano-particulate tin battery electrodes. Nanomaterials, 2018, 8: 50110.3390/nano8070501 ↗
57. Nguyen DT, Song SW. Magnesium stannide as a high-capacity anode for magnesium-ion batteries. J Power Sources, 2017, 368: 11–1710.1016/j.jpowsour.2017.09.054 ↗
58. Shao Y, Gu M, Li X, et al. Highly reversible M. insertion in nanostructured B. for M. ion batteries. Nano Lett, 2014, 14: 255–26010.1021/nl403874y ↗
59. Singh N, Arthur TS, Ling C, et al. A high energy-density tin anode for rechargeable magnesium-ion batteries. Chem Commun, 2013, 49: 149–15110.1039/C2CC34673G ↗
60. Xu Y, Deng X, Li Q, et al. Vanadium oxide pillared by interlayer Mg2+ ions and water as ultralong-life cathodes for magnesium-ion batteries. Chem, 2019, 5: 1194–120910.1016/j.chempr.2019.02.014 ↗
61. Luo J, Bi Y, Zhang L, et al. A stable, non-corrosive perfluorinated pinacolatoborate M. electrolyte for rechargeable M. batteries. Angew Chem Int Ed, 2019, 58: 6967–697110.1002/anie.201902009 ↗
62. Zhao-Karger Z, Gil Bardaji ME, Fuhr O, et al. A new class of noncorrosive, highly efficient electrolytes for rechargeable magnesium batteries. J Mater Chem A, 2017, 5: 10815–1082010.1039/C7TA02237A ↗
63. Hahn NT, Seguin TJ, Lau KC, et al. Enhanced stability of the Carba-closo-dodecaborate anion for high-voltage battery electrolytes through rational design. J A. Chem Soc, 2018, 140: 11076–1108410.1021/jacs.8b05967 ↗
64. Zhang G, Xiong T, Yan M, et al. α-MoO3−x by plasma etching with improved capacity and stabilized structure for lithium storage. Nano Energy, 2018, 49: 555–56310.1016/j.nanoen.2018.04.075 ↗
65. Liu Q, Li ZF, Liu Y, et al. Graphene-modified nanostructured vanadium pentoxide hybrids with extraordinary electrochemical performance for Li-ion batteries. Nat Commun, 2015, 6: 612710.1038/ncomms7127 ↗
66. Passerini S. XAS and electrochemical characterization of lithium intercalated V2O5 xerogels. Solid State Ion, 1996, 90: 5–1410.1016/S0167-2738(96)00380-3 ↗
67. Wong J, Lytle FW, Messmer RP, et al. K-edge absorption spectra of selected vanadium compounds. Phys Rev B, 1984, 30: 5596–561010.1103/PhysRevB.30.5596 ↗
68. Park YU, Seo DH, Kwon HS, et al. A new high-energy cathode for a Na-ion battery with ultrahigh stability. J A. Chem Soc, 2013, 135: 13870–1387810.1021/ja406016j ↗
69. Giorgetti M. In situ X-ray absorption spectroscopy characterization of V2O5 xerogel cathodes upon lithium intercalation. J Electrochem Soc, 1999, 146: 2387–239210.1149/1.1391946 ↗
70. Stallworth PE, Kostov S, den Boer ML, et al. X-ray absorption and magnetic resonance spectroscopic studies of LixV6O13. J Appl Phys, 1998, 83: 1247–125510.1063/1.366822 ↗
71. Melot BC, Tarascon JM. Design and preparation of materials for advanced electrochemical storage. Acc Chem Res, 2013, 46: 1226–123810.1021/ar300088q ↗