Capillary shrinkage of graphene oxide hydrogels
Source abstract
Abstract
Conventional carbon materials cannot combine high density and high porosity, which are required in many applications, typically for energy storage under a limited space. A novel highly dense yet porous carbon has previously been produced from a three-dimensional (3D) reduced graphene oxide (r-GO) hydrogel by evaporation-induced drying. Here the mechanism of such a network shrinkage in r-GO hydrogel is specifically illustrated by the use of water and 1,4-dioxane, which have a sole difference in surface tension. As a result, the surface tension of the evaporating solvent determines the capillary forces in the nanochannels, which causes shrinkage of the r-GO network. More promisingly, the selection of a solvent with a known surface tension can precisely tune the microstructure associated with the density and porosity of the resulting porous carbon, rendering the porous carbon materials great potential in practical devices with high volumetric performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphene research and applications · Supercapacitor Materials and Fabrication · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Geim AK, Novoselov KS. The rise of graphene. Nat Mater, 2007, 6: 183–19110.1038/nmat1849 ↗
2. Allen MJ, Tung VC, Kaner RB. Honeycomb carbon: a review of graphene. Chem Rev, 2009, 110: 132–14510.1021/cr900070d ↗
3. Ye C, Zhou X, Pu D, et al. Rapid cycling of reactive nitrogen in the marine boundary layer. Nature, 2016, 532: 489–49110.1038/nature17195 ↗
4. Ju Z, Li P, Ma G, et al. Few layer nitrogen-doped graphene with highly reversible potassium storage. Energy Storage Mater, 2018, 11: 38–4610.1016/j.ensm.2017.09.009 ↗
5. Liu L, Lin Z, Chane-Ching JY, et al. 3D rGO aerogel with superior electrochemical performance for K-Ion battery. Energy Storage Mater, 2019, 19: 306–31310.1016/j.ensm.2019.03.013 ↗
6. Raymundo-Piñero E, Leroux F, Béguin F. A high-performance carbon for supercapacitors obtained by carbonization of a seaweed biopolymer. Adv Mater, 2006, 18: 1877–188210.1002/adma.200501905 ↗
7. Zhang C, Lv W, Tao Y, et al. Towards superior volumetric performance: design and preparation of novel carbon materials for energy storage. Energy Environ Sci, 2015, 8: 1390–140310.1039/C5EE00389J ↗
8. Wang Q, Yan J, Fan Z. Carbon materials for high volumetric performance supercapacitors: design, progress, challenges and opportunities. Energy Environ Sci, 2016, 9: 729–76210.1039/C5EE03109E ↗
9. Liu C, Yan X, Hu F, et al. Toward superior capacitive energy storage: recent advances in pore engineering for dense electrodes. Adv Mater, 2018, 30: 170571310.1002/adma.201705713 ↗
10. Zhou Y, Ghaffari M, Lin M, et al. High volumetric electrochemical performance of ultra-high density aligned carbon nanotube supercapacitors with controlled nanomorphology. Electrochim Acta, 2013, 111: 608–61310.1016/j.electacta.2013.08.032 ↗
11. Murali S, Quarles N, Zhang LL, et al. Volumetric capacitance of compressed activated microwave-expanded graphite oxide (a-MEGO) electrodes. Nano Energy, 2013, 2: 764–76810.1016/j.nanoen.2013.01.007 ↗
12. Tao Y, Xie X, Lv W, et al. Towards ultrahigh volumetric capacitance: graphene derived highly dense but porous carbons for supercapacitors. Sci Rep, 2013, 3: 2975–298210.1038/srep02975 ↗
13. Li H, Tao Y, Zheng X, et al. Compressed porous graphene particles for use as supercapacitor electrodes with excellent volumetric performance. Nanoscale, 2015, 7: 18459–1846310.1039/C5NR06113J ↗
14. Zhang C, Liu DH, Lv W, et al. A high-density graphene-sulfur assembly: a promising cathode for compact Li-S batteries. Nanoscale, 2015, 7: 5592–559710.1039/C4NR06863G ↗
15. Xu Y, Tao Y, Zheng X, et al. A metal-free supercapacitor electrode material with a record high volumetric capacitance over 800 F cm−3. Adv Mater, 2015, 27: 8082–808710.1002/adma.201504151 ↗
16. Zhang C, Yang QH. Packing sulfur into carbon framework for high volumetric performance lithium-sulfur batteries. Sci China Mater, 2015, 58: 349–35410.1007/s40843-015-0051-4 ↗
17. Qin L, Zhai D, Lv W, et al. Dense graphene monolith oxygen cathodes for ultrahigh volumetric energy densities. Energy Storage Mater, 2017, 9: 134–13910.1016/j.ensm.2017.06.003 ↗
18. Zhang J, Lv W, Tao Y, et al. Ultrafast high-volumetric sodium storage of folded-graphene electrodes through surface-induced redox reactions. Energy Storage Mater, 2015, 1: 112–11810.1016/j.ensm.2015.08.006 ↗
19. Dreyer DR, Park S, Bielawski CW, et al. The chemistry of graphene oxide. Chem Soc Rev, 2010, 39: 228–24010.1039/B917103G ↗
20. Kim J, Cote LJ, Kim F, et al. Graphene oxide sheets at interfaces. J Am Chem Soc, 2010, 132: 8180–818610.1021/ja102777p ↗
21. Dikin DA, Stankovich S, Zimney EJ, et al. Preparation and characterization of graphene oxide paper. Nature, 2007, 448: 457–46010.1038/nature06016 ↗
22. Zhao Y, Hu C, Hu Y, et al. A versatile, ultralight, nitrogen-doped graphene framework. Angew Chem Int Ed, 2012, 51: 11371–1137510.1002/anie.201206554 ↗
23. Ge J, Shi LA, Wang YC, et al. Joule-heated graphene-wrapped sponge enables fast clean-up of viscous crude-oil spill. Nat Nanotech, 2017, 12: 434–44010.1038/nnano.2017.33 ↗
24. Shao JJ, Lv W, Yang QH. Self-assembly of graphene oxide at interfaces.. Adv Mater, 2014, 26: 5586–561210.1002/adma.201400267 ↗
25. Cong HP, Chen JF, Yu SH. Graphene-based macroscopic assemblies and architectures: an emerging material system. Chem Soc Rev, 2014, 43: 7295–732510.1039/C4CS00181H ↗
26. Chen W, Yan L. In situ self-assembly of mild chemical reduction graphene for three-dimensional architectures. Nanoscale, 2011, 3: 313210.1039/c1nr10355e ↗
27. Xu Y, Sheng K, Li C, et al. Self-assembled graphene hydrogel via a one-step hydrothermal process. ACS Nano, 2010, 4: 4324–433010.1021/nn101187z ↗
28. Xu Y, Lin Z, Zhong X, et al. Solvated graphene frameworks as high-performance anodes for lithium-ion batteries. Angew Chem Int Ed, 2015, 54: 5345–535010.1002/anie.201500677 ↗
29. Padmajan Sasikala S, Poulin P, Aymonier C. Prospects of supercritical fluids in realizing graphene-based functional materials. Adv Mater, 2016, 28: 2663–269110.1002/adma.201504436 ↗
30. Qiu L, Liu JZ, Chang SLY, et al. Biomimetic superelastic graphene-based cellular monoliths. Nat Commun, 2012, 3: 1241–124610.1038/ncomms2251 ↗
31. Sun H, Xu Z, Gao C. Multifunctional, ultra-flyweight, synergistically assembled carbon aerogels. Adv Mater, 2013, 25: 2554–256010.1002/adma.201204576 ↗
32. Job N, Théry A, Pirard R, et al. Carbon aerogels, cryogels and xerogels: Influence of the drying method on the textural properties of porous carbon materials. Carbon, 2005, 43: 2481–249410.1016/j.carbon.2005.04.031 ↗
33. Yang X, Cheng C, Wang Y, et al. Liquid-mediated dense integration of graphene materials for compact capacitive energy storage. Science, 2013, 341: 534–53710.1126/science.1239089 ↗
34. Tao Y, Kong D, Zhang C, et al. Monolithic carbons with spheroidal and hierarchical pores produced by the linkage of functionalized graphene sheets. Carbon, 2014, 69: 169–17710.1016/j.carbon.2013.12.003 ↗
35. Jia X, Zhang C, Liu J, et al. Evolution of the effect of sulfur confinement in graphene-based porous carbons for use in Li-S batteries. Nanoscale, 2016, 8: 4447–445110.1039/C5NR08839A ↗
36. Sierra U, Álvarez P, Santamaría R, et al. A multi-step exfoliation approach to maintain the lateral size of graphene oxide sheets. Carbon, 2014, 80: 830–83210.1016/j.carbon.2014.08.053 ↗
37. Nair RR, Wu HA, Jayaram PN, et al. Unimpeded permeation of water through helium-leak-tight graphene-based membranes. Science, 2012, 335: 442–44410.1126/science.1211694 ↗
38. Hovorka F, Schaefer RA, Dreisbach D. The system dioxane and water. J Am Chem Soc, 1936, 58: 2264–226710.1021/ja01302a051 ↗
39. Baker NB, Gilbert EC. Surface tension in the system hydrazine—water at 25°. J Am Chem Soc, 1940, 62: 2479–248010.1021/ja01866a060 ↗
40. Thommes M, Kaneko K, Neimark AV, et al. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report). Pure Appl Chem, 2015, 87: 1051–106910.1515/pac-2014-1117 ↗
41. Steiner T. The hydrogen bond in the solid state. Angew Chem Int Ed, 2002, 41: 48–7610.1002/1521-3773(20020104)41:1<48::AID-ANIE48>3.0.CO;2-U ↗
42. Xu X, Zhang Q, Yu Y, et al. Naturally dried graphene aerogels with superelasticity and tunable Poisson’s ratio. Adv Mater, 2016, 28: 9223–923010.1002/adma.201603079 ↗
43. Shang T, Lin Z, Qi C, et al. 3D macroscopic architectures from self-assembled MXene hydrogels. Adv Funct Mater, 2019, 29: 190396010.1002/adfm.201903960 ↗