Flexible, high-voltage, ion-conducting composite membranes with 3D aramid nanofiber frameworks for stable all-solid-state lithium metal batteries
Source abstract
Abstract
The practical application of solid polymer electrolytes in high-energy Li metal batteries is hindered by Li dendrites, electrochemical instability and insufficient ion conductance. To address these issues, flexible composite polymer electrolyte (CPE) membranes with three dimensional (3D) aramid nanofiber (ANF) frameworks are facilely fabricated by filling polyethylene oxide (PEO)-lithium bis(trifluoromethylsulphonyl)imide (LiTFSI) electrolyte into 3D ANF scaffolds. Because of the unique composite structure design and the continuous ion conduction at the 3D ANF framework/PEO-LiTFSI interfaces, the CPE membranes show higher mechanical strength (10.0 MPa), thermostability, electrochemical stability (4.6 V at 60°C) and ionic conductivity than the pristine PEO-LiTFSI electrolyte. Thus, the CPEs display greatly improved interfacial stability against Li dendrites (≥1000 h at 30°C under 0.10 mA cm−2 ), compared with the pristine electrolyte (short circuit in 13 h). The CPE-based all-solid-state LiFePO4/Li cells also exhibit superior cycling performance (e.g., 130 mA h g−1 with 93% retention after 100 cycles at 0.4 C) than the ANF-free cells (e.g., 82 mA h g−1 with 66% retention). This work offers a simple and effective way to achieve high-performance composite electrolyte membranes with 3D nanofiller framework for promising solid-state Li metal battery applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. Zhang X, Cheng X, Zhang Q. Nanostructured energy materials for electrochemical energy conversion and storage: a review. J Energy Chem, 2016, 25: 967–98410.1016/j.jechem.2016.11.003 ↗
2. Cao G. Solvent-salt synergy offers a safe pathway towards next generation high voltage Li-ion batteries. Sci China Mater, 2018, 61: 1360–136210.1007/s40843-018-9296-y ↗
3. Yang X, Sun Q, Zhao C, et al. High-areal-capacity all-solid-state lithium batteries enabled by rational design of fast ion transport channels in vertically-aligned composite polymer electrodes. Nano Energy, 2019, 61: 567–57510.1016/j.nanoen.2019.05.002 ↗
4. Xin S, You Y, Wang S, et al. Solid-state lithium metal batteries promoted by nanotechnology: progress and prospects. ACS Energy Lett, 2017, 2: 1385–139410.1021/acsenergylett.7b00175 ↗
5. Watanabe T, Inafune Y, Tanaka M, et al. Development of all-solidstate battery based on lithium ion conductive polymer nanofiber framework. J Power Sources, 2019, 423: 255–26210.1016/j.jpowsour.2019.03.066 ↗
6. Wu H, Zhang Y, Deng Y, et al. A lightweight carbon nanofiber-based 3D structured matrix with high nitrogen-doping level for lithium metal anodes. Sci China Mater, 2019, 62: 87–9410.1007/s40843-018-9298-x ↗
7. Zhang H, Li C, Piszcz M, et al. Single lithium-ion conducting solid polymer electrolytes: advances and perspectives. Chem Soc Rev, 2017, 46: 797–81510.1039/C6CS00491A ↗
8. Yu D, Li X, Xu J. Safety regulation of gel electrolytes in electrochemical energy storage devices. Sci China Mater, 2019, 62: 1556–157310.1007/s40843-019-9475-4 ↗
9. Yang C, Fu K, Zhang Y, et al. Protected lithium-metal anodes in batteries: from liquid to solid. Adv Mater, 2017, 29: 170116910.1002/adma.201701169 ↗
10. Tan SJ, Zeng XX, Ma Q, et al. Recent advancements in polymer-based composite electrolytes for rechargeable lithium batteries. Electrochem Energ Rev, 2018, 1: 113–13810.1007/s41918-018-0011-2 ↗
11. Tao C, Gao MH, Yin BH, et al. A promising TPU/PEO blend polymer electrolyte for all-solid-state lithium ion batteries. Electrochim Acta, 2017, 257: 31–3910.1016/j.electacta.2017.10.037 ↗
12. Wan J, Xie J, Kong X, et al. Ultrathin, flexible, solid polymer composite electrolyte enabled with aligned nanoporous host for lithium batteries. Nat Nanotechnol, 2019, 14: 705–71110.1038/s41565-019-0465-3 ↗
13. He K, Chen C, Fan R, et al. Polyethylene oxide/garnet-type Li6.4La3Zr1.4Nb0.6O12 composite electrolytes with improved electrochemical performance for solid state lithium rechargeable batteries Compos Sci Tech, 2019, 175: 28–3410.1016/j.compscitech.2019.02.030 ↗
14. Liu L, Li M, Chu L, et al. Facile fabrication of flexible Si-based nanocomposite films as high-rate anodes by layer-by-layer self-assembly Appl Surf Sci, 2019, 476: 501–51210.1016/j.apsusc.2019.01.075 ↗
15. Zhang Y, Lu W, Cong L, et al. Cross-linking network based on poly(ethylene oxide): solid polymer electrolyte for room temperature lithium battery J Power Sources, 2019, 420: 63–7210.1016/j.jpowsour.2019.02.090 ↗
16. Duan H, Fan M, Chen WP, et al. Extended electrochemical window of solid electrolytes via heterogeneous multilayered structure for high-voltage lithium metal batteries Adv Mater, 2019, 31: 180778910.1002/adma.201807789 ↗
17. He ZJ, Fan LZ. Poly(ethylene carbonate)-based electrolytes with high concentration Li salt for all-solid-state lithium batteries Rare Met, 2018, 37: 488–49610.1007/s12598-018-1017-y ↗
18. Hu J, Wang W, Zhou B, et al. Poly(ethylene oxide)-based composite polymer electrolytes embedding with ionic bond modified nanoparticles for all-solid-state lithium-ion battery J Membrane Sci, 2019, 575: 200–20810.1016/j.memsci.2019.01.025 ↗
19. Suriyakumar S, Gopi S, Kathiresan M, et al. Metal organic framework laden poly(ethylene oxide) based composite electrolytes for all-solid-state Li-S and Li-metal polymer batteries Electrochim Acta, 2018, 285: 355–36410.1016/j.electacta.2018.08.012 ↗
20. Zhao CZ, Zhang XQ, Cheng XB, et al. An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes Proc Natl Acad Sci USA, 2017, 114: 11069–1107410.1073/pnas.1708489114 ↗
21. Li W, Sun C, Jin J, et al. Realization of the Li+ domain diffusion effect via constructing molecular brushes on the LLZTO surface and its application in all-solid-state lithium batteries J Mater Chem A, 2019, 7: 27304–2731210.1039/C9TA10400C ↗
22. Fu X, Li C, Wang Y, et al. Building ion-conduction highways in polymeric electrolytes by manipulating protein configuration. ACS Appl Mater Interfaces, 2018, 10: 4726–473610.1021/acsami.7b17156 ↗
23. Chen L, Li Y, Li SP, et al. PEO/garnet composite electrolytes for solid-state lithium batteries: from “ceramic-in-polymer” to “polymer-in-ceramic”. Nano Energy, 2018, 46: 176–18410.1016/j.nanoen.2017.12.037 ↗
24. Chen S, Wang J, Zhang Z, et al. In-situ preparation of poly(ethylene oxide)/Li3PS4 hybrid polymer electrolyte with good nanofiller distribution for rechargeable solid-state lithium batteries J Power Sources, 2018, 387: 72–8010.1016/j.jpowsour.2018.03.016 ↗
25. Zhu L, Zhu P, Fang Q, et al. A novel solid PEO/LLTO-nanowires polymer composite electrolyte for solid-state lithium-ion battery. Electrochim Acta, 2018, 292: 718–72610.1016/j.electacta.2018.10.005 ↗
26. Lin D, Yuen PY, Liu Y, et al. A silica-aerogel-reinforced composite polymer electrolyte with high ionic conductivity and high modulus. Adv Mater, 2018, 30: 180266110.1002/adma.201802661 ↗
27. Tang W, Tang S, Zhang C, et al. Simultaneously enhancing the thermal stability, mechanical modulus, and electrochemical performance of solid polymer electrolytes by incorporating 2D sheets. Adv Energy Mater, 2018, 8: 180086610.1002/aenm.201800866 ↗
28. Dirican M, Yan C, Zhu P, et al. Composite solid electrolytes for all-solid-state lithium batteries. Mater Sci Eng-R-Rep, 2019, 136: 27–4610.1016/j.mser.2018.10.004 ↗
29. Gomari S, Esfandeh M, Ghasemi I. All-solid-state flexible nanocomposite polymer electrolytes based on poly(ethylene oxide): lithium perchlorate using functionalized graphene. Solid State Ion, 2017, 303: 37–4610.1016/j.ssi.2017.02.005 ↗
30. Fu KK, Gong Y, Dai J, et al. Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries. Proc Natl Acad Sci USA, 2016, 113: 7094–709910.1073/pnas.1600422113 ↗
31. Wang X, Zhai H, Qie B, et al. Rechargeable solid-state lithium metal batteries with vertically aligned ceramic nanoparticle/polymer composite electrolyte. Nano Energy, 2019, 60: 205–21210.1016/j.nanoen.2019.03.051 ↗
32. Zhai H, Xu P, Ning M, et al. A flexible solid composite electrolyte with vertically aligned and connected ion-conducting nanoparticles for lithium batteries. Nano Lett, 2017, 17: 3182–318710.1021/acs.nanolett.7b00715 ↗
33. Gong Y, Fu K, Xu S, et al. Lithium-ion conductive ceramic textile: a new architecture for flexible solid-state lithium metal batteries. Mater Today, 2018, 21: 594–60110.1016/j.mattod.2018.01.001 ↗
34. Xie H, Yang C, Fu KK, et al. Flexible, scalable, and highly conductive garnet-polymer solid electrolyte templated by bacterial cellulose. Adv Energy Mater, 2018, 8: 170347410.1002/aenm.201703474 ↗
35. Bae J, Li Y, Zhang J, et al. A 3D nanostructured hydrogel-frame-work-derived high-performance composite polymer lithium-ion electrolyte. Angew Chem Int Ed, 2018, 57: 2096–210010.1002/anie.201710841 ↗
36. Bae J, Li Y, Zhao F, et al. Designing 3D nanostructured garnet frameworks for enhancing ionic conductivity and flexibility in composite polymer electrolytes for lithium batteries. Energy Storage Mater, 2018, 15: 46–5210.1016/j.ensm.2018.03.016 ↗
37. Li D, Chen L, Wang T, et al. 3D fiber-network-reinforced bicontinuous composite solid electrolyte for dendrite-free lithium metal batteries. ACS Appl Mater Interfaces, 2018, 10: 7069–707810.1021/acsami.7b18123 ↗
38. Wang X, Zhang Y, Zhang X, et al. Lithium-salt-rich PEO/Li0.3La0.557TiO3 interpenetrating composite electrolyte with three-dimensional ceramic nano-backbone for all-solid-state lithium-ion batteries. ACS Appl Mater Interfaces, 2018, 10: 24791–2479810.1021/acsami.8b06658 ↗
39. Fu KK, Gong Y, Hitz GT, et al. Three-dimensional bilayer garnet solid electrolyte based high energy density lithium metal-sulfur batteries. Energy Environ Sci, 2017, 10: 1568–157510.1039/C7EE01004D ↗
40. Zhang M, Gui AL, Sun W, et al. High capacity utilization of Li metal anodes by application of celgard separator-reinforced ternary polymer electrolyte. J Electrochem Soc, 2019, 166: A2142–A215010.1149/2.1131910jes ↗
41. Lyu J, Liu L, Zhao X, et al. Facile fabrication of multifunctional aramid nanofiber films by spin coating. J Mater Eng Perform, 2016, 25: 4757–476310.1007/s11665-016-2350-7 ↗
42. Lyu J, Wang X, Liu L, et al. High strength conductive composites with plasmonic nanoparticles aligned on aramid nanofibers. Adv Funct Mater, 2016, 26: 8435–844510.1002/adfm.201603230 ↗
43. Yang M, Cao K, Yeom B, et al. Aramid nanofiber-reinforced transparent nanocomposites. J Composite Mater, 2015, 49: 1873–187910.1177/0021998315579230 ↗
44. Wang F, Wu Y, Huang Y, et al. Strong, transparent and flexible aramid nanofiber/POSS hybrid organic/inorganic nanocomposite membranes. Compos Sci Tech, 2018, 156: 269–27510.1016/j.compscitech.2018.01.016 ↗
45. Kwon SR, Elinski MB, Batteas JD, et al. Robust and flexible aramid nanofiber/graphene layer-by-layer electrodes. ACS Appl Mater Interfaces, 2017, 9: 17125–1713510.1021/acsami.7b03449 ↗
46. Lyu J, Liu Z, Wu X, et al. Nanofibrous kevlar aerogel films and their phase-change composites for highly efficient infrared stealth. ACS Nano, 2019, acsnano.8b0891310.1021/acsnano.8b08913 ↗
47. Tung SO, Ho S, Yang M, et al. A dendrite-suppressing composite ion conductor from aramid nanofibres. Nat Commun, 2015, 6: 615210.1038/ncomms7152 ↗
48. Hu S, Lin S, Tu Y, et al. Novel aramid nanofiber-coated polypropylene separators for lithium ion batteries. J Mater Chem A, 2016, 4: 3513–352610.1039/C5TA08694A ↗
49. Zhang H, Zhang Y, Xu T, et al. Poly(m-phenylene isophthalamide) separator for improving the heat resistance and power density of lithium-ion batteries. J Power Sources, 2016, 329: 8–1610.1016/j.jpowsour.2016.08.036 ↗
50. Lyu J, Hammig MD, Liu L, et al. Stretchable conductors by kirigami patterning of aramid-silver nanocomposites with zero conductance gradient. Appl Phys Lett, 2017, 111: 16190110.1063/1.5001094 ↗
51. Lyu J, Zhao X, Hou X, et al. Electromagnetic interference shielding based on a high strength polyaniline-aramid nanocomposite. Compos Sci Tech, 2017, 149: 159–16510.1016/j.compscitech.2017.06.026 ↗
52. Li W, Zhang S, Wang B, et al. Nanoporous adsorption effect on alteration of the Li+ diffusion pathway by a highly ordered porous electrolyte additive for high-rate all-solid-state lithium metal batteries. ACS Appl Mater Interfaces, 2018, 10: 23874–2388210.1021/acsami.8b06574 ↗
53. Das S, Ghosh A. Charge carrier relaxation in different plasticized PEO/PVDF-HFP blend solid polymer electrolytes. J Phys Chem B, 2017, 121: 5422–543210.1021/acs.jpcb.7b02277 ↗
54. Lopez J, Sun Y, Mackanic DG, et al. A dual-crosslinking design for resilient lithium-ion conductors. Adv Mater, 2018, 30: 180414210.1002/adma.201804142 ↗
55. Sheng O, Jin C, Luo J, et al. Mg2B2O5 nanowire enabled multifunctional solid-state electrolytes with high ionic conductivity, excellent mechanical properties, and flame-retardant performance. Nano Lett, 2018, 18: 3104–311210.1021/acs.nanolett.8b00659 ↗
56. Sun Z, Li Y, Zhang S, et al. g-C3N4 nanosheets enhanced solid polymer electrolytes with excellent electrochemical performance, mechanical properties, and thermal stability. J Mater Chem A, 2019, 7: 11069–1107610.1039/C9TA00634F ↗
57. Khurana R, Schaefer JL, Archer LA, et al. Suppression of lithium dendrite growth using cross-linked polyethylene/poly(ethylene oxide) electrolytes: a new approach for practical lithium-metal polymer batteries. J Am Chem Soc, 2014, 136: 7395–740210.1021/ja502133j ↗
58. Stone GM, Mullin SA, Teran AA, et al. Resolution of the modulus versus adhesion dilemma in solid polymer electrolytes for rechargeable lithium metal batteries. J Electrochem Soc, 2012, 159: A222–A22710.1149/2.030203jes ↗
59. Zhou Q, Ma J, Dong S, et al. Intermolecular chemistry in solid polymer electrolytes for high-energy-density lithium batteries. Adv Mater, 2019, 31: 190202910.1002/adma.201902029 ↗
60. Zhang Q, Liu K, Ding F, et al. Recent advances in solid polymer electrolytes for lithium batteries. Nano Res, 2017, 10: 4139–417410.1007/s12274-017-1763-4 ↗
61. Kharlampieva E, Kozlovskaya V, Sukhishvili SA. Layer-by-layer hydrogen-bonded polymer films: from fundamentals to applications. Adv Mater, 2009, 21: 3053–306510.1002/adma.200803653 ↗
62. Stephan AM, Prem Kumar T, Angulakshmi N, et al. Influence of calix[2]-p-benzo[4]pyrrole on the electrochemical properties of poly(ethylene oxide)-based electrolytes for lithium batteries. J Appl Polym Sci, 2011, 120: 2215–222110.1002/app.33462 ↗
63. Blazejczyk A, Wieczorek W, Kovarsky R, et al. Novel solid polymer electrolytes with single lithium-ion transport. J Electrochem Soc, 2004, 151: A176210.1149/1.1793714 ↗
64. Blazejczyk A, Szczupak M, Wieczorek W, et al. Anion-binding calixarene receptors: synthesis, microstructure, and effect on properties of polyether electrolytes. Chem Mater, 2005, 17: 1535–154710.1021/cm048679j ↗
65. Karthik K, Murugan R. Lithium garnet based free-standing solid polymer composite membrane for rechargeable lithium battery. J Solid State Electrochem, 2018, 22: 2989–299810.1007/s10008-018-4010-3 ↗
66. Zhang J, Zang X, Wen H, et al. High-voltage and free-standing poly(propylene carbonate)/Li6.75La3Zr1.75Ta0.25O12 composite solid electrolyte for wide temperature range and flexible solid lithium ion battery. J Mater Chem A, 2017, 5: 4940–494810.1039/C6TA10066J ↗
67. Sasikumar M, Raja M, Krishna RH, et al. Influence of hydrothermally synthesized cubic-structured BaTiO3 ceramic fillers on ionic conductivity, mechanical integrity, and thermal behavior of P(VDF-HFP)/PVAc-based composite solid polymer electrolytes for lithium-ion batteries J Phys Chem C, 2018, 122: 25741–2575210.1021/acs.jpcc.8b03952 ↗
68. Pandian AS, Chen XC, Chen J, et al. Facile and scalable fabrication of polymer-ceramic composite electrolyte with high ceramic loadings. J Power Sources, 2018, 390: 153–16410.1016/j.jpowsour.2018.04.006 ↗
69. Liu L, Chu L, Jiang B, et al. Li1.4Al0.4Ti1.6(PO4)3 nanoparticle-reinforced solid polymer electrolytes for all-solid-state lithium batteries Solid State Ion, 2019, 331: 89–9510.1016/j.ssi.2019.01.007 ↗
70. Wang Z, Huang X, Chen L Understanding of effects of nano-Al2O3 particles on ionic conductivity of composite polymer electrolytes Electrochem Solid-State Lett, 2003, 6: E4010.1149/1.1615352 ↗
71. Liu W, Liu N, Sun J, et al. Ionic conductivity enhancement of polymer electrolytes with ceramic nanowire fillers Nano Lett, 2015, 15: 2740–274510.1021/acs.nanolett.5b00600 ↗
72. Cheng SHS, He KQ, Liu Y, et al. Electrochemical performance of all-solid-state lithium batteries using inorganic lithium garnets particulate reinforced PEO/LiClO4 electrolyte Electrochim Acta, 2017, 253: 430–43810.1016/j.electacta.2017.08.162 ↗
73. Liu L, Lyu J, Mo J, et al. Comprehensively-upgraded polymer electrolytes by multifunctional aramid nanofibers for stable all-solid-state Li-ion batteries. Nano Energy, 2020, 69: 10439810.1016/j.nanoen.2019.104398 ↗
74. Wang Q, Song WL, Fan LZ, et al. Flexible, high-voltage and freestanding composite polymer electrolyte membrane based on triethylene glycol diacetate-2-propenoic acid butyl ester copolymer for lithium-ion batteries. J Membrane Sci, 2015, 492: 490–49610.1016/j.memsci.2015.06.041 ↗
75. Zheng J, Hu YY. New insights into the compositional dependence of Li-ion transport in polymer-ceramic composite electrolytes. ACS Appl Mater Interfaces, 2018, 10: 4113–412010.1021/acsami.7b17301 ↗
76. Liu L, Wu X, Li T. Novel polymer electrolytes based on cationic polyurethane with different alkyl chain length. J Power Sources, 2014, 249: 397–40410.1016/j.jpowsour.2013.10.116 ↗
77. Porcarelli L, Manojkumar K, Sardon H, et al. Single ion conducting polymer electrolytes based on versatile polyurethanes. Electrochim Acta, 2017, 241: 526–53410.1016/j.electacta.2017.04.132 ↗
78. Mustapa SR, Aung MM, Ahmad A, et al. Preparation and characterization of Jatropha oil-based polyurethane as non-aqueous solid polymer electrolyte for electrochemical devices. Electrochim Acta, 2016, 222: 293–30210.1016/j.electacta.2016.10.173 ↗
79. Lin D, Liu W, Liu Y, et al. High ionic conductivity of composite solid polymer electrolyte via in situ synthesis of monodispersed SiO2 nanospheres in poly(ethylene oxide). Nano Lett, 2016, 16: 459–46510.1021/acs.nanolett.5b04117 ↗
80. Ke X, Cheng Y, Liu J, et al. Hierarchically bicontinuous porous copper as advanced 3D skeleton for stable lithium storage. ACS Appl Mater Interfaces, 2018, 10: 13552–1356110.1021/acsami.8b01978 ↗
81. Yang T, Zheng J, Cheng Q, et al. Composite polymer electrolytes with Li7La3Zr2O12 garnet-type nanowires as ceramic fillers: mechanism of conductivity enhancement and role of doping and morphology. ACS Appl Mater Interfaces, 2017, 9: 21773–2178010.1021/acsami.7b03806 ↗
82. Fan X, Ji X, Han F, et al. Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery. Sci Adv, 2018, 4: eaau924510.1126/sciadv.aau9245 ↗
83. Chen L, Fan L. Dendrite-free Li metal deposition in all-solid-state lithium sulfur batteries with polymer-in-salt polysiloxane electrolyte. Energy Storage Mater, 2018, 15: 37–4510.1016/j.ensm.2018.03.015 ↗
84. Zhu P, Yan C, Dirican M, et al. Li0.33La0.557TiO3 ceramic nanofiber-enhanced polyethylene oxide-based composite polymer electrolytes for all-solid-state lithium batteries. J Mater Chem A, 2018, 6: 4279–428510.1039/C7TA10517G ↗
85. Liu S, Wang H, Imanishi N, et al. Effect of co-doping nano-silica filler and N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide into polymer electrolyte on Li dendrite formation in Li/poly(ethylene oxide)-Li(CF3SO2)2N/Li. J Power Sources, 2011, 196: 7681–768610.1016/j.jpowsour.2011.04.001 ↗
86. Brissot C, Rosso M, Chazalviel JN, et al. Dendritic growth mechanisms in lithium/polymer cells. J Power Sources, 1999, 81–82: 925–92910.1016/S0378-7753(98)00242-0 ↗
87. Rosso M, Brissot C, Teyssot A, et al. Dendrite short-circuit and fuse effect on Li/polymer/Li cells. Electrochim Acta, 2006, 51: 5334–534010.1016/j.electacta.2006.02.004 ↗
88. Xu Y, Zhou Y, Li T, et al. Multifunctional covalent organic frameworks for high capacity and dendrite-free lithium metal batteries. Energy Storage Mater, 201910.1021/scimeetings.0c01113 ↗
89. Chazalviel JN. Electrochemical aspects of the generation of ramified metallic electrodeposits. Phys Rev A, 1990, 42: 7355–736710.1103/PhysRevA.42.7355 ↗
90. Zhang B, Zhang Y, Zhang N, et al. Synthesis and interface stability of polystyrene-poly(ethylene glycol)-polystyrene triblock copolymer as solid-state electrolyte for lithium-metal batteries. J Power Sources, 2019, 428: 93–10410.1016/j.jpowsour.2019.04.033 ↗
91. Wu JF, Guo X. Nanostructured metal-organic framework (MOF)-derived solid electrolytes realizing fast lithium ion transportation kinetics in solid-state batteries. Small, 2019, 15: 180441310.1002/smll.201804413 ↗
92. Shen B, Zhang TW, Yin YC, et al. Chemically exfoliated boron nitride nanosheets form robust interfacial layers for stable solidstate Li metal batteries. Chem Commun, 2019, 55: 7703–770610.1039/C9CC02124H ↗
93. Jung YC, Lee SM, Choi JH, et al. All solid-state lithium batteries assembled with hybrid solid electrolytes. J Electrochem Soc, 2015, 162: A704–A71010.1149/2.0731504jes ↗