HF-free synthesis of high-entropy MXene-PVA composite film and its flexible nanogenerator
Source abstract
Abstract
Abstract MXene exhibits notable piezoelectric properties, making it a promising material for high-performance piezoelectric nanogenerators (PENGs) in next-generation smart wearable devices and bioelectronics. However, current MXene-based PENGs face challenges such as insufficient mechanical robustness, low piezoelectric response, and limited long-term functionality. These limitations primarily stem from the small effective area and low strain levels of MXene nanosheets. Here, we constructed a high-entropy TiVCrMoC3T x MXene composite film by leveraging strong hydrogen bonding interactions between MXene and polyvinyl alcohol (PVA), which was further developed into a self-powered flexible nanogenerator. The resulting device exhibited a significant piezoresponse with output signals of 500 mV and 790 pA under a compressive force of 3.47 N, along with considerable long-term functionality over 1500 cycles. Moreover, a hydrofluoric-free etching approach was employed to synthesize the high-entropy MXene nanosheets, which ensures the safety and biocompatibility for bioelectronics applications. This work highlights the potential of high-entropy MXene for sustainable applications in wearable electronics and energy harvesting.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · Graphene research and applications · 2D Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Zhang J, Zhao Y, Guo X, et al. Single platinum atoms immobilized on an MXene as an efficient catalyst for the hydrogen evolution reaction. Nat Catal, 2018, 1: 985–99210.1038/s41929-018-0195-1 ↗
2. Zha XH, Yin J, Zhou Y, et al. Intrinsic structural, electrical, thermal, and mechanical properties of the promising conductor Mo2C MXene. J Phys Chem C, 2016, 120: 15082–1508810.1021/acs.jpcc.6b04192 ↗
3. Lipatov A, Lu H, Alhabeb M, et al. Elastic properties of 2D Ti3C2Tx MXene monolayers and bilayers. Sci Adv, 2018, 4: eaat049110.1126/sciadv.aat0491 ↗
4. Wyatt BC, Rosenkranz A, Anasori B. 2D MXenes: tunable mechanical and tribological properties. Adv Mater, 2021, 33: e200797310.1002/adma.202007973 ↗
5. Tan D, Jiang C, Sun N, et al. Piezoelectricity in monolayer MXene for nanogenerators and piezotronics. Nano Energy, 2021, 90: 10652810.1016/j.nanoen.2021.106528 ↗
6. Wang D, Zhang D, Li P, et al. Electrospinning of flexible poly(vinyl alcohol)/MXene nanofiber-based humidity sensor self-powered by monolayer molybdenum diselenide piezoelectric nanogenerator. Nano-Micro Lett, 2021, 13: 5710.1007/s40820-020-00580-5 ↗
7. Jin L, Ao Y, Xu T, et al. Recent advances in MXene-based composites for piezoelectric sensors. Nanoscale, 2024, 16: 21673–2169610.1039/D4NR03233K ↗
8. Pang SY, Wong YT, Yuan S, et al. Universal strategy for HF-free facile and rapid synthesis of two-dimensional MXenes as multifunctional energy materials. J Am Chem Soc, 2019, 141: 9610–961610.1021/jacs.9b02578 ↗
9. Jiang C, Zeng L, Tan D, et al. Piezoelectric behavior of single-layer oxidized-MXene for nanogenerators and piezotronics. Nano Energy, 2023, 114: 10867010.1016/j.nanoen.2023.108670 ↗
10. Kim G, Yun J, Kim D. Enhancing power generation with a SnSe2-MXene composite in a piezo-triboelectric hybrid nanogenerator for autonomous energy applications. Nano Energy, 2024, 126: 10967810.1016/j.nanoen.2024.109678 ↗
11. Tan J, Wang Y, Wang Z, et al. Large out-of-plane piezoelectricity of oxygen functionalized MXenes for ultrathin piezoelectric cantilevers and diaphragms. Nano Energy, 2019, 65: 10405810.1016/j.nanoen.2019.104058 ↗
12. Pang SY, Io WF, Guo F, et al. Two-dimensional MXene-based devices for information technology. Mater Sci Eng-R-Rep, 2025, 163: 10089410.1016/j.mser.2024.100894 ↗
13. Nemani SK, Zhang B, Wyatt BC, et al. High-entropy 2D carbide MXenes: TiVNbMoC3 and TiVCrMoC3. ACS Nano, 2021, 15: 12815–1282510.1021/acsnano.1c02775 ↗
14. Tan TL, Jin HM, Sullivan MB, et al. High-throughput survey of ordering configurations in MXene alloys across compositions and temperatures. ACS Nano, 2017, 11: 4407–441810.1021/acsnano.6b08227 ↗
15. Leong Z, Jin H, Wong ZM, et al. Elucidating the chemical order and disorder in high-entropy MXenes: a high-throughput survey of the atomic configurations in TiVNbMoC3 and TiVCrMoC3. Chem Mater, 2022, 34: 9062–907110.1021/acs.chemmater.2c01673 ↗
16. Li Y, Shao H, Lin Z, et al. A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte. Nat Mater, 2020, 19: 894–89910.1038/s41563-020-0657-0 ↗
17. Li T, Yao L, Liu Q, et al. Fluorine-free synthesis of high-purity Ti3C2T (T = OH, O) via alkali treatment. Angew Chem Int Ed, 2018, 57: 6115–611910.1002/anie.201800887 ↗
18. Ma R, Zhang X, Zhuo J, et al. Self-supporting, binder-free, and flexible Ti3C2T MXene-based supercapacitor electrode with improved electrochemical performance. ACS Nano, 2022, 16: 9713–972710.1021/acsnano.2c03351 ↗
19. Ling Z, Ren CE, Zhao MQ, et al. Flexible and conductive MXene films and nanocomposites with high capacitance. Proc Natl Acad Sci USA, 2014, 111: 16676–1668110.1073/pnas.1414215111 ↗
20. Zhao L, Wang L, Zheng Y, et al. Highly-stable polymer-crosslinked 2D MXene-based flexible biocompatible electronic skins for in vivo biomonitoring. Nano Energy, 2021, 84: 10592110.1016/j.nanoen.2021.105921 ↗
21. Naguib M, Kurtoglu M, Presser V, et al. Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2. Adv Mater, 2011, 23: 4248–425310.1002/adma.201102306 ↗
22. Cheng L, Chen Q, Li J, et al. Boosting the photocatalytic activity of CdLa2S4 for hydrogen production using Ti3C2 MXene as a co-catalyst. Appl Catal B-Environ, 2020, 267: 11837910.1016/j.apcatb.2019.118379 ↗
23. Cao S, Shen B, Tong T, et al. 2D/2D heterojunction of ultrathin MXene/Bi2WO6 nanosheets for improved photocatalytic CO2 reduction. Adv Funct Mater, 2018, 28: 180013610.1002/adfm.201800136 ↗
24. Spanier JE, Gupta S, Amer M, et al. Vibrational behavior of the Mn+1AXn phases from first-order Raman scattering (M = Ti, V, Cr, A = Si, X = C, N). Phys Rev B, 2005, 71: 01210310.1103/PhysRevB.71.012103 ↗
25. Lai S, Jeon J, Jang SK, et al. Surface group modification and carrier transport properties of layered transition metal carbides (Ti2CTx T: −OH, −F and −O). Nanoscale, 2015, 7: 19390–1939610.1039/C5NR06513E ↗
26. Dixit P, Maiti T. A facile pot synthesis of (Ti3AlC2) MAX phase and its derived MXene (Ti3C2Tx). Ceramics Int, 2022, 48: 36156–3616510.1016/j.ceramint.2022.08.172 ↗
27. Liu F, Zhou A, Chen J, et al. Preparation and methane adsorption of two-dimensional carbide Ti2C. Adsorption, 2016, 22: 915–92210.1007/s10450-016-9795-8 ↗
28. Ferrari AC, Robertson J, Ferrari AC, et al. Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond. Philos Trans R Soc London Ser A-Math Phys Eng Sci, 2004, 362: 2477–251210.1098/rsta.2004.1452 ↗
29. Kumar S. Fluorine-free MXenes: recent advances, synthesis strategies, and mechanisms. Small, 2024, 20: 230822510.1002/smll.202308225 ↗
30. Yoon J, Kim S, Park KH, et al. Biocompatible and oxidation-resistant Ti3C2Tx MXene with halogen-free surface terminations. Small Methods, 2023, 7: 220157910.1002/smtd.202201579 ↗
31. Yang F, Li J, Long Y, et al. Wafer-scale heterostructured piezoelectric bio-organic thin films. Science, 2021, 373: 337–34210.1126/science.abf2155 ↗
32. Liu J, Zhang H, Sun R, et al. Hydrophobic, flexible, and lightweight MXene foams for high-performance electromagnetic-interference shielding. Adv Mater, 2017, 29: 170236710.1002/adma.201702367 ↗
33. Xie Y, Jiang W, Fu T, et al. Achieving high energy density and low loss in PVDF/BST nanodielectrics with enhanced structural homogeneity. ACS Appl Mater Interfaces, 2018, 10: 29038–2904710.1021/acsami.8b10354 ↗
34. Wan YJ, Li XM, Zhu PL, et al. Lightweight, flexible MXene/polymer film with simultaneously excellent mechanical property and high-performance electromagnetic interference shielding. Compos Part A-Appl Sci Manufacturing, 2020, 130: 10576410.1016/j.compositesa.2020.105764 ↗
35. Mirkhani SA, Shayesteh Zeraati A, Aliabadian E, et al. High dielectric constant and low dielectric loss via poly(vinyl alcohol)/Ti3C2Tx MXene nanocomposites. ACS Appl Mater Interfaces, 2019, 11: 18599–1860810.1021/acsami.9b00393 ↗
36. Shepelin NA, Sherrell PC, Skountzos EN, et al. Interfacial piezoelectric polarization locking in printable Ti3C2Tx MXene-fluoropolymer composites. Nat Commun, 2021, 12: 317110.1038/s41467-021-23341-3 ↗
37. Yang B, Liu Y, Lan S, et al. High-entropy design for dielectric materials: Status, challenges, and beyond. J Appl Phys, 2023, 133: 11090410.1063/5.0138877 ↗
38. Wu J, Ma X, Zhou D, et al. High-entropy high-temperature high-piezoelectricity ceramics. Adv Mater, 2025, 37: 241913410.1002/adma.202419134 ↗
39. Chen Y, Tian Z, Wang X, et al. 2D transition metal dichalcogenide with increased entropy for piezoelectric electronics. Adv Mater, 2022, 34: 220163010.1002/adma.202201630 ↗
40. Tan D, Sun N, Chen L, et al. Piezoelectricity in monolayer and multilayer Ti3C2Tx MXenes: implications for piezoelectric devices. ACS Appl Nano Mater, 2022, 5: 1034–104610.1021/acsanm.1c03696 ↗
41. Li X, Qiu J, Cui H, et al. Machine learning accelerated discovery of functional MXenes with giant piezoelectric coefficients. ACS Appl Mater Interfaces, 2024, 16: 12731–1274310.1021/acsami.3c14610 ↗
42. Deng Q, Zhou F, Qin B, et al. Eco-friendly poly(vinyl alcohol)/delaminated V2C MXene high-k nanocomposites with low dielectric loss enabled by moderate polarization and charge density at the interface. Ceramics Int, 2020, 46: 27326–2733510.1016/j.ceramint.2020.07.218 ↗
43. Li J, Xia B, Xiao X, et al. Stretchable thermoelectric fibers with three-dimensional interconnected porous network for low-grade body heat energy harvesting. ACS Nano, 2023, 17: 19232–1924110.1021/acsnano.3c05797 ↗
44. Li J, Liu Y, Wu M, et al. Thin, soft, 3D printing enabled crosstalk minimized triboelectric nanogenerator arrays for tactile sensing. Fundamental Res, 2023, 3: 111–11710.1016/j.fmre.2022.01.021 ↗
45. Hu Q, Wan X, Wang S, et al. Ultrathin, flexible, and piezoelectric Janus nanofibrous dressing for wound healing. Sci China Mater, 2023, 66: 3347–336010.1007/s40843-022-2444-0 ↗
46. Dai B, Gao C, Guo J, et al. A robust pyro-phototronic route to markedly enhanced photocatalytic disinfection. Nano Lett, 2024, acs.nanolett.3c0509810.1021/acs.nanolett.3c05098 ↗