journal article·2020-07Open access

Vortex fluidic mediated one-step fabrication of polyvinyl alcohol hydrogel films with tunable surface morphologies and enhanced self-healing properties

Javad Tavakoli, Colin L. Raston, Yong Ma, Youhong Tang

Science China Materials· Volume 63· Issue 7

Abstract

Previous strategies for controlling the surface morphologies of polyvinyl alcohol (PVA)-based hydrogels, including freeze-drying and electrospinning, require a post-treatment process, which can affect the final textures and properties of the hydrogels. Of particular interest, it is almost impossible to control the surface morphology during the formation of PVA hydrogels using these approaches. The strategy reported in this study used the novel vortex fluidic device (VFD) technology, which for the first time provided an opportunity for one-step fabrication of PVA hydrogel films. PVA hydrogels with different surface morphologies could be readily fabricated using a VFD. By also reducing the crosslinking agent concentration, a self-healing gel with enhanced fracture stress (60% greater than that of traditionally made hydrogel) was achieved. Interestingly, the associated self-healing property remained unchanged during the 260-s mechanical testing performed with the strain rate of 5% s−1. The VFD can effectively tune the surface morphologies of the PVA-based hydrogels and their associated properties, particularly the self-healing property.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Advanced Materials and Mechanics · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Cascone S, Lamberti G. Hydrogel-based commercial products for biomedical applications: A review. Int J Pharm, 2020, 573: 11880310.1016/j.ijpharm.2019.118803 ↗
2. Tavakoli J, Zhang H, Tang BZ, et al. Aggregation-induced emission lights up the swelling process: A new technique for swelling characterisation of hydrogels. Mater Chem Front, 2019, 1: 664–66710.1039/C9QM00054B ↗
3. Tavakoli J, Gascooke J, Xie N, et al. Enlightening freeze-thaw process of physically cross-linked poly(vinyl alcohol) hydrogels by aggregation-induced emission fluorogens. ACS Appl Polym Mater, 2019, 1: 1390–139810.1021/acsapm.9b00173 ↗
4. Tavakoli J, Tang Y. Hydrogel based sensors for biomedical applications: An updated review. Polymers, 2017, 9: 36410.3390/polym9080364 ↗
5. Jia R, Li L, Ai Y, et al. Self-healable wire-shaped supercapacitors with two twisted NiCo2O4 coated polyvinyl alcohol hydrogel fibers. Sci China Mater, 2018, 1: 254–26210.1007/s40843-017-9177-5 ↗
6. Zhang X, Xia LY, Chen X, et al. Hydrogel-based phototherapy for fighting cancer and bacterial infection. Sci China Mater, 2017, 1: 487–50310.1007/s40843-017-9025-3 ↗
7. Tavakoli J, Mirzaei S, Tang Y. Cost-effective double-layer hydrogel composites for wound dressing applications. Polymers, 2018, 10: 30510.3390/polym10030305 ↗
8. Yan W, Chen Q, Meng X, et al. Multicycle photocatalytic reduction of Cr(VI) over transparent PVA/TiO2 nanocomposite films under visible light. Sci China Mater, 2017, 1: 449–46010.1007/s40843-017-9024-9 ↗
9. Li SK, Mao LB, Gao HL, et al. Bio-inspired clay nanosheets/polymer matrix/mineral nanofibers ternary composite films with optimal balance of strength and toughness. Sci China Mater, 2017, 1: 909–917
10. Zhong L, Qu Y, Shi K, et al. Biomineralized polymer matrix composites for bone tissue repair: A review. Sci China Chem, 2018, 1: 1553–156710.1007/s11426-018-9324-0 ↗
11. Baker MI, Walsh SP, Schwartz Z, et al. A review of polyvinyl alcohol and its uses in cartilage and orthopedic applications. J Biomed Mater Res, 2012, 1: 1451–145710.1002/jbm.b.32694 ↗
12. Slaughter BV, Khurshid SS, Fisher OZ, et al. Hydrogels in regenerative medicine. Adv Mater, 2009, 1: 3307–332910.1002/adma.200802106 ↗
13. Costa-Júnior ES, Barbosa-Stancioli EF, Mansur AAP, et al. Preparation and characterization of chitosan/poly(vinyl alcohol) chemically crosslinked blends for biomedical applications. Carbohydr Polym, 2009, 1: 472–48110.1016/j.carbpol.2008.11.015 ↗
14. Dehbari N, Tavakoli J, Zhao J, et al. In situ formed internal water channels improving water swelling and mechanical properties of water swellable rubber composites. J Appl Polym Sci, 2017, 134: 4454810.1002/app.44548 ↗
15. Liu J, Ye J, Pan F, et al. Solid-state yet flexible supercapacitors made by inkjet-printing hybrid ink of carbon quantum dots/graphene oxide platelets on paper. Sci China Mater, 2019, 1: 545–55410.1007/s40843-018-9309-x ↗
16. Chee BS, Goetten de Lima G, Devine DM, et al. Investigation of the effects of orientation on freeze/thawed polyvinyl alcohol hydrogel properties. Mater Today Commun, 2018, 1: 82–9310.1016/j.mtcomm.2018.08.005 ↗
17. Peppas NA, Scott JE. Controlled release from poly(vinyl alcohol) gels prepared by freezing-thawing processes. J Control Release, 1992, 1: 95–10010.1016/0168-3659(92)90178-T ↗
18. Hassan CM, Peppas NA. Cellular PVA hydrogels produced by freeze/thawing. J Appl Polym Sci, 2000, 1: 2075–207910.1002/(SICI)1097-4628(20000628)76:14<2075::AID-APP11>3.0.CO;2-V ↗
19. Mansur HS, Sadahira CM, Souza AN, et al. FTIR spectroscopy characterization of poly(vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde. Mater Sci Eng-C, 2008, 1: 539–54810.1016/j.msec.2007.10.088 ↗
20. Ossipov Da, Hilborn J. Poly(vinyl alcohol)-based hydrogels formed by “click chemistry”. Macromolecules, 2006, 1: 1709–171810.1021/ma052545p ↗
21. Schmedlen RH, Masters KS, West JL. Photocrosslinkable polyvinyl alcohol hydrogels that can be modified with cell adhesion peptides for use in tissue engineering. Biomaterials, 2002, 1: 4325–433210.1016/S0142-9612(02)00177-1 ↗
22. Han J, Lei T, Wu Q. Facile preparation of mouldable polyvinyl alcohol-borax hydrogels reinforced by well-dispersed cellulose nanoparticles: Physical, viscoelastic and mechanical properties. Cellulose, 2013, 1: 2947–295810.1007/s10570-013-0082-5 ↗
23. Tavakoli J. Physico-mechanical, morphological and biomedical properties of a novel natural wound dressing material. J Mech Behav BioMed Mater, 2017, 1: 373–38210.1016/j.jmbbm.2016.09.008 ↗
24. Tavakoli J, Tang Y. Honey/PVA hybrid wound dressings with controlled release of antibiotics: Structural, physico-mechanical and in-vitro biomedical studies. Mater Sci Eng-C, 2017, 1: 318–32510.1016/j.msec.2017.03.272 ↗
25. Han J, Lei T, Wu Q. High-water-content mouldable polyvinyl alcohol-borax hydrogels reinforced by well-dispersed cellulose nanoparticles: Dynamic rheological properties and hydrogel formation mechanism. Carbohydr Polym, 2014, 1: 306–31610.1016/j.carbpol.2013.11.045 ↗
26. Spoljaric S, Salminen A, Luong ND, et al. Stable, self-healing hydrogels from nanofibrillated cellulose, poly(vinyl alcohol) and borax via reversible crosslinking. Eur Polym J, 2014, 1: 105–11710.1016/j.eurpolymj.2014.03.009 ↗
27. Cencetti C, Bellini D, Pavesio A, et al. Preparation and characterization of antimicrobial wound dressings based on silver, gellan, PVA and borax. Carbohydrate Polyms, 2012, 1: 1362–137010.1016/j.carbpol.2012.07.005 ↗
28. Balakrishnan B, Jayakrishnan A. Self-cross-linking biopolymers as injectable in situ forming biodegradable scaffolds. Biomaterials, 2005, 1: 3941–395110.1016/j.biomaterials.2004.10.005 ↗
29. Yang N, Qi P, Ren J, et al. Polyvinyl alcohol/silk fibroin/borax hydrogel ionotronics: A highly stretchable, self-healable, and biocompatible sensing platform. ACS Appl Mater Interfaces, 2019, 1: 23632–2363810.1021/acsami.9b06920 ↗
30. Jian M, Wang C, Wang Q, et al. Advanced carbon materials for flexible and wearable sensors. Sci China Mater, 2017, 1: 1026–106210.1007/s40843-017-9077-x ↗
31. Ochiai H, Fukushima S, Fujikawa M, et al. Mechanical and thermal properties of poly(vinyl alcohol) crosslinked by borax. Polym J, 1976, 1: 131–13310.1295/polymj.8.131 ↗
32. Lu B, Lin F, Jiang X, et al. One-pot assembly of microfibrillated cellulose reinforced PVA-borax hydrogels with self-healing and pH-responsive properties. ACS Sustain Chem Eng, 2017, 1: 948–95610.1021/acssuschemeng.6b02279 ↗
33. Lawrence MB, Joseph J, Phondekar K, et al. D.C. conductivity behaviour of poly(vinyl alcohol)-based ferrogels: role of borax and carbonyl iron. Polym Bull, 2019, 1: 6327–634110.1007/s00289-019-02719-w ↗
34. Ge W, Cao S, Shen F, et al. Rapid self-healing, stretchable, moldable, antioxidant and antibacterial tannic acid-cellulose nanofibril composite hydrogels. Carbohydr Polym, 2019, 224: 11514710.1016/j.carbpol.2019.115147 ↗
35. Jing Z, Xu A, Liang YQ, et al. Biodegradable poly(acrylic acid-coacrylamide)/poly(vinyl alcohol) double network hydrogels with tunable mechanics and high self-healing performance. Polymers, 2019, 11: 95210.3390/polym11060952 ↗
36. Lei W, Qi S, Rong Q, et al. Diffusion-freezing-induced microphase separation for constructing large-area multiscale structures on hydrogel surfaces. Adv Mater, 2019, 31: 180821710.1002/adma.201808217 ↗
37. Britton J, Stubbs KA, Weiss GA, et al. Frontispiece: Vortex fluidic chemical transformations. Chem Eur J, 2017, 1: 13270–1327810.1002/chem.201700888 ↗
38. Yasmin L, Chen X, Stubbs KA, et al. Optimising a vortex fluidic device for controlling chemical reactivity and selectivity. Sci Rep, 2013, 3: 228210.1038/srep02282 ↗
39. Vimalanathan K, Gascooke JR, Suarez-Martinez I, et al. Fluid dynamic lateral slicing of high tensile strength carbon nanotubes. Sci Rep, 2016, 6: 2286510.1038/srep22865 ↗
40. Luo X, Al-Antaki AHM, Vimalanathan K, et al. Laser irradiated vortex fluidic mediated synthesis of luminescent carbon nanodots under continuous flow. React Chem Eng, 2018, 1: 164–17010.1039/C7RE00197E ↗
41. Luo X, Smith P, Raston CL, et al. Vortex fluidic device-intensified aqueous two phase extraction of C-phycocyanin from Spirulina maxima. ACS Sustain Chem Eng, 2016, 1: 3905–391110.1021/acssuschemeng.6b00756 ↗
42. Luo X, Al-Antaki AHM, Pye S, et al. High-shear-imparted tunable fluorescence in polyethylenimines. ChemPhotoChem, 2018, 1: 343–34810.1002/cptc.201700206 ↗
43. Chen X, Dobson JF, Raston CL. Vortex fluidic exfoliation of graphite and boron nitride. Chem Commun, 2012, 1: 3703–370510.1039/c2cc17611d ↗
44. Yuan TZ, Ormonde CFG, Kudlacek ST, et al. Shear-stress-mediated refolding of proteins from aggregates and inclusion bodies. ChemBioChem, 2015, 1: 393–39610.1002/cbic.201402427 ↗
45. Tavakoli J, Pye S, Reza AHMM, et al. Tuning aggregation-induced emission nanoparticle properties under thin film formation. Mater Chem Front, 2020, 1: 537–54510.1039/C9QM00585D ↗
46. Nune KC, Li S, Misra RDK. Advancements in three-dimensional titanium alloy mesh scaffolds fabricated by electron beam melting for biomedical devices: Mechanical and biological aspects. Sci China Mater, 2018, 1: 455–47410.1007/s40843-017-9134-x ↗
47. Lei D, Luo B, Guo Y, et al. 4-axis printing microfibrous tubular scaffold and tracheal cartilage application. Sci China Mater, 2019, 1: 1910–192010.1007/s40843-019-9498-5 ↗
48. Fan F, Sun J, Chen B, et al. Rotating magnetic field-controlled fabrication of magnetic hydrogel with spatially disk-like microstructures. Sci China Mater, 2018, 1: 1112–112210.1007/s40843-017-9221-4 ↗
49. Tavakoli J, Laisak E, Gao M, et al. Aiegen quantitatively monitoring the release of Ca2+ during swelling and degradation process in alginate hydrogels. Mater Sci Eng-C, 2019, 104: 10995110.1016/j.msec.2019.109951 ↗