Engineering “JiaoJiao” (maltose syrup) with chopsticks: From traditional Chinese sweet food to skin-like iontronics
Source abstract
Abstract
The advancement of technology has had a profound impact on all areas of life, with an ever more intimate integration of the digital and biological spheres, but it may also be accompanied by an environmental crisis caused by the abuse of large quantities of electronics and petrochemicals. Next-generation “green” electronics or iontronics with high biocompatibility, biodegradation, low cost and mechanical compliance promise to mitigate these adverse effects, but are often limited by the finite choices of materials and strategies. Herein, maltose syrup, a traditional water-dissolvable saccharide food called “JiaoJiao” in Chinese, is engineered to replace unsustainable conductive components of current electronic devices. After churning and pulling with two chopsticks, known as aeration, the aerated maltose syrup has optimized viscoelasticity, mechanical adaptation, robustness, remodeling and self-healing capability, yet with transient behavior. Moreover, the structural and viscoelastic evolution during aeration is also analyzed to maximize the contribution from structures. As a proof-of-concept, a type of “green” skinlike iontronics is prepared, which exhibits reliable strain sensing ability and is subsequently applied for intelligent information encryption and transmission based on a novel concept of sending Morse code. This work greatly extends the current material choice and is expected to shed light on the development of a sustainable future.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Advanced Materials and Mechanics · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Huang S, Liu Y, Zhao Y, et al. Flexible electronics: Stretchable electrodes and their future. Adv Funct Mater, 2019, 29: 180592410.1002/adfm.201805924 ↗
2. Yuk H, Lu B, Zhao X. Hydrogel bioelectronics. Chem Soc Rev, 2019, 48: 1642–166710.1039/C8CS00595H ↗
3. Jian M, Wang C, Wang Q, et al. Advanced carbon materials for flexible and wearable sensors. Sci China Mater, 2017, 60: 1026–106210.1007/s40843-017-9077-x ↗
4. Forrest SR. The path to ubiquitous and low-cost organic electronic appliances on plastic. Nature, 2004, 428: 911–91810.1038/nature02498 ↗
5. Fu KK, Wang Z, Dai J, et al. Transient electronics: Materials and devices. Chem Mater, 2016, 28: 3527–353910.1021/acs.chemmater.5b04931 ↗
6. Irimia-Vladu M. “Green” electronics: Biodegradable and biocompatible materials and devices for sustainable future. Chem Soc Rev, 2014, 43: 588–61010.1039/C3CS60235D ↗
7. Wang L, Chen D, Jiang K, et al. New insights and perspectives into biological materials for flexible electronics. Chem Soc Rev, 2017, 46: 6764–681510.1039/C7CS00278E ↗
8. Wang L, Wang K, Lou Z, et al. Plant-based modular building blocks for “green” electronic skins. Adv Funct Mater, 2018, 28: 180451010.1002/adfm.201804510 ↗
9. Marr PC, Marr AC. Ionic liquid gel materials: Applications in green and sustainable chemistry. Green Chem, 2016, 18: 105–12810.1039/C5GC02277K ↗
10. Li W, Liu Q, Zhang Y, et al. Biodegradable materials and green processing for green electronics. Adv Mater, 2020, 32: 200159110.1002/adma.202001591 ↗
11. Teng L, Ye S, Handschuh-Wang S, et al. Liquid metal-based transient circuits for flexible and recyclable electronics. Adv Funct Mater, 2019, 29: 180873910.1002/adfm.201808739 ↗
12. Son D, Lee J, Lee DJ, et al. Bioresorbable electronic stent integrated with therapeutic nanoparticles for endovascular diseases. ACS Nano, 2015, 9: 5937–594610.1021/acsnano.5b00651 ↗
13. Yin R, Yang S, Li Q, et al. Flexible conductive Ag nanowire/cellulose nanofibril hybrid nanopaper for strain and temperature sensing applications. Sci Bull, 2020, 65: 899–90810.1016/j.scib.2020.02.020 ↗
14. Wang C, Hou X, Cui M, et al. An ultra-sensitive and wide measuring range pressure sensor with paper-based CNT film/inter-digitated structure. Sci China Mater, 2020, 63: 403–41210.1007/s40843-019-1173-3 ↗
15. Zhu B, Wang H, Leow WR, et al. Silk fibroin for flexible electronic devices. Adv Mater, 2016, 28: 4250–426510.1002/adma.201504276 ↗
16. Wang Q, Ling S, Liang X, et al. Self-healable multifunctional electronic tattoos based on silk and graphene. Adv Funct Mater, 2019, 29: 180869510.1002/adfm.201808695 ↗
17. Wang C, Xia K, Zhang Y, et al. Silk-based advanced materials for soft electronics. Acc Chem Res, 2019, 52: 2916–292710.1021/acs.accounts.9b00333 ↗
18. Baumgartner M, Hartmann F, Drack M, et al. Resilient yet entirely degradable gelatin-based biogels for soft robots and electronics. Nat Mater, 2020, 19: 1102–110910.1038/s41563-020-0699-3 ↗
19. Xu W, Yang H, Zeng W, et al. Food-based edible and nutritive electronics. Adv Mater Technol, 2017, 2: 170018110.1002/admt.201700181 ↗
20. Chang Q, He Y, Liu Y, et al. Protein gel phase transition: Toward superiorly transparent and hysteresis-free wearable electronics. Adv Funct Mater, 2020, 30: 191008010.1002/adfm.201910080 ↗
21. Darabi MA, Khosrozadeh A, Wang Q, et al. Gum sensor: A stretchable, wearable, and foldable sensor based on carbon nano-tube/chewing gum membrane. ACS Appl Mater Interfaces, 2015, 7: 26195–2620510.1021/acsami.5b08276 ↗
22. Lei Z, Huang J, Wu P. Traditional dough in the era of internet of things: Edible, renewable, and reconfigurable skin-like iontronics. Adv Funct Mater, 2020, 30: 190801810.1002/adfm.201908018 ↗
23. Cao Y, Mezzenga R. Design principles of food gels. Nat Food, 2020, 1: 106–11810.1038/s43016-019-0009-x ↗
24. Wang X, Xu W, Chatterjee P, et al. Food-materials-based edible supercapacitors. Adv Mater Technol, 2016, 1: 160005910.1002/admt.201600059 ↗
25. Powrie WD. Chemical effects during storage of frozen foods. J Chem Educ, 1984, 61: 34010.1021/ed061p340 ↗
26. Lin Q, Xiao H, Liu GQ, et al. Production of maltose syrup by enzymatic conversion of rice starch. Food Bioprocess Technol, 2013, 6: 242–24810.1007/s11947-011-0681-9 ↗
27. Saha BC, Zeikus JG. Improved method for preparing high maltose conversion syrups. Biotechnol Bioeng, 1989, 34: 299–30310.1002/bit.260340304 ↗
28. Zúñiga R, Aguilera J. Aerated food gels: Fabrication and potential applications. Trends Food Sci Tech, 2008, 19: 176–18710.1016/j.tifs.2007.11.012 ↗
29. Campbell G. Creation and characterisation of aerated food products. Trends Food Sci Tech, 1999, 10: 283–29610.1016/S0924-2244(00)00008-X ↗
30. Campbell GM. Chapter 1-A history of aerated foods. In: Campbell GM, Scanlon MG, Pyle DL (eds.). Bubbles in Food 2. St. Paul: Woodhead Publishing and AACC International Press, 2008. 1–21
31. Weissenberg K. A continuum theory of rhelogical phenomena. Nature, 1947, 159: 310–31110.1038/159310a0 ↗
32. Boland CS, Khan U, Ryan G, et al. Sensitive electromechanical sensors using viscoelastic graphene-polymer nanocomposites. Science, 2016, 354: 1257–126010.1126/science.aag2879 ↗
33. Suh D, Faseela KP, Kim W, et al. Electron tunneling of hierarchically structured silver nanosatellite particles for highly conductive healable nanocomposites. Nat Commun, 2020, 11: 225210.1038/s41467-020-15709-8 ↗
34. Hartel RW, von Elbe JH, Hofberger R. Aerated confections. In: Hartel RW, von Elbe JH, Hofberger R (eds.). Confectionery Science and Technology. Cham: Springer, 2018. 301–32710.1007/978-3-319-61742-8_11 ↗
35. Wang J, Kliks MM, Jun S, et al. Rapid analysis of glucose, fructose, sucrose, and maltose in honeys from different geographic regions using Fourier transform infrared spectroscopy and multivariate analysis. J Food Sci, 2010, 75: C208–C21410.1111/j.1750-3841.2009.01504.x ↗
36. Liu X, Liu J, Lin S, et al. Hydrogel machines. Mater Today, 2020, 36: 102–12410.1016/j.mattod.2019.12.026 ↗
37. Fu X, Li J, Tang C, et al. Hydrogel cryo-microtomy continuously making soft electronic devices. Adv Funct Mater, 2020, 31: 200835510.1002/adfm.202008355 ↗
38. Chun H, Chung TD. Iontronics. Annu Rev Anal Chem, 2015, 8: 441–46210.1146/annurev-anchem-071114-040202 ↗
39. Yang C, Suo Z. Hydrogel ionotronics. Nat Rev Mater, 2018, 3: 125–14210.1038/s41578-018-0018-7 ↗
40. Chortos A, Bao Z. Skin-inspired electronic devices. Mater Today, 2014, 17: 321–33110.1016/j.mattod.2014.05.006 ↗
41. Bai Y, Chen B, Xiang F, et al. Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt. Appl Phys Lett, 2014, 105: 15190310.1063/1.4898189 ↗
42. Bai J, Wang R, Ju M, et al. Facile preparation and high performance of wearable strain sensors based on ionically cross-linked composite hydrogels. Sci China Mater, 2021, 64: 942–95210.1007/s40843-020-1507-0 ↗
43. Someya T, Bao Z, Malliaras GG. The rise of plastic bioelectronics. Nature, 2016, 540: 379–38510.1038/nature21004 ↗
44. Chandrasekhar A, Vivekananthan V, Khandelwal G, et al. A fully packed water-proof, humidity resistant triboelectric nanogenerator for transmitting Morse code. Nano Energy, 2019, 60: 850–85610.1016/j.nanoen.2019.04.004 ↗
45. Liu S, Cheng Y, Li Y, et al. Manipulating solid-state intramolecular motion toward controlled fluorescence patterns. ACS Nano, 2020, 14: 2090–209810.1021/acsnano.9b08761 ↗
46. Qin R, Liu Y, Tao F, et al. Protein-bound freestanding 2D metal film for stealth information transmission. Adv Mater, 2018, 180337710.1002/adma.201803377 ↗