journal article·2021-09

A new approach to produce polystyrene monoliths by gelation and capillary shrinkage

Dewang Li, Yaqian Deng, Jingyi Xia, Zhitan Wu, Tongxin Shang, Pei Li, Junwei Han, Ying Tao, Quan-Hong Yang

Science China Materials· Volume 64· Issue 9
Publisher page

Abstract

Polymeric monoliths are of great interest in a variety of applications. A new gelation approach to produce a mechanically stable polystyrene (PS) gel directly from its microemulsion is reported. To produce a PS gel, the as-prepared microemulsion is first demulsified by adding selected water-miscible organic solvents. The small PS latex particles liberated from the surfactant are assembled into a piece of bulk material at an appropriate temperature with a high degree of entanglement of the polymer chains. It is found that the d2T/η value is an important parameter to evaluate the gelation ability of the organic solvents and helps determine the gelation conditions. Finally, PS monoliths are obtained by capillary drying and their pore structures can be effectively tuned by changing the gelation time and the amount of solvent exchanged with water. This allows the controlled preparation of bulk PS artefacts with densities in the range of 0.06 to 1.14 g cm−3. This simple method of PS monolith production avoids the use of shaping tools or chemical templates, needs less energy, and is a promising alternative approach to design either integrated porous or compact polymer materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pickering emulsions and particle stabilization · Advanced Polymer Synthesis and Characterization · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Feinle A, Elsaesser MS, Hüsing N. Sol-gel synthesis of monolithic materials with hierarchical porosity. Chem Soc Rev, 2016, 45: 3377–339910.1039/C5CS00710K ↗
2. Röttger M, Domenech T, van der Weegen R, et al. Highperformance vitrimers from commodity thermoplastics through dioxaborolane metathesis. Science, 2017, 356: 62–6510.1126/science.aah5281 ↗
3. Nutz FA, Ruckdeschel P, Retsch M. Polystyrene colloidal crystals: Interface controlled thermal conductivity in an open-porous mesoparticle superstructure. J Colloid Interface Sci, 2015, 457: 96–10110.1016/j.jcis.2015.06.022 ↗
4. de Assis GC, Skovroinski E, Leite VD, et al. Conversion of “waste plastic” into photocatalytic nanofoams for environmental remediation. ACS Appl Mater Interfaces, 2018, 10: 8077–808510.1021/acsami.7b19834 ↗
5. Ye Y, Jin M, Wan D. One-pot synthesis of porous monolith-supported gold nanoparticles as an effective recyclable catalyst. J Mater Chem A, 2015, 3: 13519–1352510.1039/C5TA02925B ↗
6. Chen Q, Shi T, Han F, et al. Porous polystyrene monoliths and microparticles prepared from core cross-linked star (CCS) polymers-stabilized emulsions. Sci Rep, 2017, 7: 849310.1038/s41598-017-09216-y ↗
7. Pang B, Liu H, Liu P, et al. Water-in-oil Pickering emulsions stabilized by stearoylated microcrystalline cellulose. J Colloid Interface Sci, 2018, 513: 629–63710.1016/j.jcis.2017.11.079 ↗
8. Chen C, Li R, Xu L, et al. Three-dimensional superhydrophobic porous hybrid monoliths for effective removal of oil droplets from the surface of water. RSC Adv, 2014, 4: 17393–1740010.1039/c4ra00047a ↗
9. Silverstein MS. PolyHIPES: Recent advances in emulsion-templated porous polymers. Prog Polym Sci, 2014, 39: 199–23410.1016/j.progpolymsci.2013.07.003 ↗
10. Sun G, Li Z, Ngai T. Inversion of particle-stabilized emulsions to form high-internal-phase emulsions. Angew Chem Int Ed, 2010, 49: 2163–216610.1002/anie.200907175 ↗
11. Menner A, Ikem V, Salgueiro M, et al. High internal phase emulsion templates solely stabilised by functionalised titania nanoparticles. Chem Commun, 2007, 41: 4274–427610.1039/b708935j ↗
12. Marti N, Quattrini F, Butté A, et al. Production of polymeric materials with controlled pore structure: the “reactive gelation” process. Macromol Mater Eng, 2005, 290: 221–22910.1002/mame.200400344 ↗
13. Lamprou A, Köse Iı, Storti G, et al. Synthesis of macroporous polymer particles using reactive gelation under shear. Langmuir, 2014, 30: 6946–695310.1021/la5000793 ↗
14. Wang G, Yu B, Chen S, et al. Template-free synthesis of polystyrene monoliths for the removal of oil-in-water emulsion. Sci Rep, 2017, 7: 653410.1038/s41598-017-06572-7 ↗
15. Kim SJ, Raut P, Jana SC, et al. Electrostatically active polymer hybrid aerogels for airborne nanoparticle filtration. ACS Appl Mater Interfaces, 2017, 9: 6401–641010.1021/acsami.6b14784 ↗
16. Schüler F, Schamel D, Salonen A, et al. Synthesis of macroporous polystyrene by the polymerization of foamed emulsions. Angew Chem Int Ed, 2012, 51: 2213–221710.1002/anie.201107806 ↗
17. Tao Y, Xie X, Lv W, et al. Towards ultrahigh volumetric capacitance: graphene derived highly dense but porous carbons for supercapacitors. Sci Rep, 2013, 3: 297510.1038/srep02975 ↗
18. Li P, Li H, Han D, et al. Packing activated carbons into dense graphene network by capillarity for high volumetric performance supercapacitors. Adv Sci, 2019, 6: 180235510.1002/advs.201802355 ↗
19. Khan MF, Singh MK, Sen S. Measuring size, size distribution, and polydispersity of water-in-oil microemulsion droplets using fluorescence correlation spectroscopy: Comparison to dynamic light scattering. J Phys Chem B, 2016, 120: 1008–102010.1021/acs.jpcb.5b09920 ↗
20. Sun H, Jiao R, Xu H, et al. The influence of particle size and concentration combined with pH on coagulation mechanisms. J Environ Sci, 2019, 82: 39–4610.1016/j.jes.2019.02.021 ↗
21. Ellison CJ, Torkelson JM. The distribution of glass-transition temperatures in nanoscopically confined glass formers. Nat Mater, 2003, 2: 695–70010.1038/nmat980 ↗
22. Kim H, Cang Y, Kang E, et al. Direct observation of polymer surface mobility via nanoparticle vibrations. Nat Commun, 2018, 9: 291810.1038/s41467-018-04854-w ↗
23. Huo H, Li K, Wang Q, et al. Self-assembly and optical property of triblock copolymers made of polystyrene and oligo(p-phenyleneethynylene) in different mixtures of toluene and hexane. Macromolecules, 2007, 40: 6692–669810.1021/ma071247k ↗
24. Busse WF. The physical structure of elastic colloids. J Phys Chem, 1932, 36: 2862–287910.1021/j150342a002 ↗
25. Flory PJ. Network structure and the elastic properties of vulcanized rubber. Chem Rev, 1944, 35: 51–7510.1021/cr60110a002 ↗
26. Liu B, Zhang M, Cheng H, et al. Large-scale and narrow dispersed latex formation in batch emulsion polymerization of styrene in methanol-water solution. Colloid Polym Sci, 2014, 292: 519–52510.1007/s00396-013-3113-8 ↗
27. Li B, Zhou J, Xu X, et al. Solvent quality affects chain conformational order at the polymer surface revealed by sum frequency generation vibrational spectroscopy. Polymer, 2013, 54: 1853–185910.1016/j.polymer.2013.02.002 ↗
28. Banjare MK, Kurrey R, Yadav T, et al. A comparative study on the effect of imidazolium-based ionic liquid on self-aggregation of cationic, anionic and nonionic surfactants studied by surface tension, conductivity, fluorescence and FTIR spectroscopy. J Mol Liquids, 2017, 241: 622–63210.1016/j.molliq.2017.06.009 ↗
29. Feng S, Li ZY, Liu R, et al. Glass transition of polystyrene nanospheres under different confined environments in aqueous dispersions. Soft Matter, 2013, 9: 461410.1039/c3sm27576k ↗
30. Zhang X, Yang H, Song Y, et al. Rheological behaviors of randomly crosslinked low density polyethylene and its gel network. Polymer, 2012, 53: 3035–304210.1016/j.polymer.2012.05.004 ↗