Reduction in the temperature coefficient of photovoltaic efficiency in all-polymer solar cells using molecular order
Source abstract
Abstract
全聚合物太阳能电池(All-PSCs)具有良好的机械稳定性和热稳 定性, 受到人们的广泛关注. 目前, 提高全聚合物太阳能电池性能的关 键是改善活性层的形貌. 本文通过逐层(LBL)工艺, 优化了薄膜形貌, 实 现了更好的电荷产生和传输, 增加了激子扩散长度, 提高了电荷产量并抑制了复合损失. 此外, 本文进一步研究了LBL制备的全聚合物太阳 能电池中的激子/电荷行为与温度的依赖性关系. 详细的原位光谱测量 和光电特性表征表明, 独特的形态延长了激子寿命, 减少了电荷陷阱并促进了电荷传输和收集. 因此, 准双层PM6/PYF-T-o器件的能量转换 效率(PCE)显著提高(16.70%). 此外, 与BHJ器件相比, 通过LBL工艺制备 的器件, 实现了增强的分子有序性, 降低了能级混乱度, 使得器件填充 系数和PCE温度依赖性减弱. 本工作为太阳能电池在温度可变环境下 的电荷传输行为和光伏性能提供了新的认识, 也为其实际应用提供了 理论依据.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Sun R, Wang W, Yu H, et al. Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors. Joule, 2021, 5: 1548–156510.1016/j.joule.2021.04.007 ↗
2. Zhou D, Liao C, Peng S, et al. Binary blend all-polymer solar cells with a record efficiency of 17.41% enabled by programmed fluorination both on donor and acceptor blocks. Adv Sci, 2022, 9: 220202210.1002/advs.202202022 ↗
3. Wan Q, Seo S, Lee SW, et al. High-performance intrinsically stretchable polymer solar cell with record efficiency and stretchability enabled by thymine-functionalized terpolymer. J Am Chem Soc, 2023, 145: 11914–1192010.1021/jacs.3c02764 ↗
4. Fan Q, Su W, Chen S, et al. Mechanically robust all-polymer solar cells from narrow band gap acceptors with hetero-bridging atoms. Joule, 2020, 4: 658–67210.1016/j.joule.2020.01.014 ↗
5. Wu B, Yin B, Duan C, et al. All-polymer solar cells. J Semicond, 2021, 42: 08030110.1088/1674-4926/42/8/080301 ↗
6. Wu Y, Fan Q, Fan B, et al. Non-fullerene acceptor doped block copolymer for efficient and stable organic solar cells. ACS Energy Lett, 2022, 7: 2196–220210.1021/acsenergylett.2c01082 ↗
7. Zhang J, Tan CH, Zhang K, et al. n-extended conjugated polymer acceptor containing thienylene-vinylene-thienylene unit for high-performance thick-film all-polymer solar cells with superior long-term stability. Adv Energy Mater, 2021, 11: 210255910.1002/aenm.202102559 ↗
8. Zhang W, Sun C, Angunawela I, et al. 16.52% Efficiency all-polymer solar cells with high tolerance of the photoactive layer thickness. Adv Mater, 2022, 34: 210874910.1002/adma.202108749 ↗
9. Yu H, Luo S, Sun R, et al. A difluoro-monobromo end group enables high-performance polymer acceptor and efficient all-polymer solar cells processable with green solvent under ambient condition. Adv Funct Mater, 2021, 31: 210079110.1002/adfm.202100791 ↗
10. Cai Y, Li Q, Lu G, et al. Vertically optimized phase separation with improved exciton diffusion enables efficient organic solar cells with thick active layers. Nat Commun, 2022, 13: 236910.1038/s41467-022-29803-6 ↗
11. Li D, Deng N, Fu Y, et al. Fibrillization of non-fullerene acceptors enables 19% efficiency pseudo-bulk heterojunction organic solar cells. Adv Mater, 2023, 35: 220821110.1002/adma.202208211 ↗
12. Zhu L, Zhang M, Xu J, et al. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology. Nat Mater, 2022, 21: 656–66310.1038/s41563-022-01244-y ↗
13. Wei Y, Chen Z, Lu G, et al. Binary organic solar cells breaking 19% via manipulating the vertical component distribution. Adv Mater, 2022, 34: 220471810.1002/adma.202204718 ↗
14. Li S, He C, Chen T, et al. Refined molecular microstructure and optimized carrier management of multicomponent organic photovoltaics toward 19.3% certified efficiency. Energy Environ Sci, 2023, 16: 2262–227310.1039/D3EE00630A ↗
15. Xu W, Zhang M, Ma X, et al. Over 17.4% efficiency of layer-by-layer all-polymer solar cells by improving exciton utilization in acceptor layer. Adv Funct Mater, 2023, 33: 221520410.1002/adfm.202215204 ↗
16. Zhao C, Yi J, Wang L, et al. An improved performance of all polymer solar cells enabled by sequential processing via non-halogenated solvents. Nano Energy, 2022, 104: 10787210.1016/j.nanoen.2022.107872 ↗
17. Li Y, Song J, Dong Y, et al. Polymerized small molecular acceptor with branched side chains for all polymer solar cells with efficiency over 16.7%. Adv Mater, 2022, 34: 211015510.1002/adma.202110155 ↗
18. Liang S, Lou Z, Zhang Q, et al. Improved hole transfer and charge generation in all-polymer photovoltaic blends with a P–i–N structure. J Phys Chem C, 2020, 124: 25262–2526910.1021/acs.jpcc.0c08559 ↗
19. Liu Z, Ma X, Xu W, et al. 15.28% Efficiency of conventional layer-by-layer all-polymer solar cells superior to bulk heterojunction or inverted cells. Chem Eng J, 2022, 450: 13814610.1016/j.cej.2022.138146 ↗
20. Xu Y, Yuan J, Liang S, et al. Simultaneously improved efficiency and stability in all-polymer solar cells by a P–i–N architecture. ACS Energy Lett, 2019, 4: 2277–228610.1021/acsenergylett.9b01459 ↗
21. Lee C, Kang H, Lee W, et al. High-performance all-polymer solar cells via side-chain engineering of the polymer acceptor: The importance of the polymer packing structure and the nanoscale blend morphology. Adv Mater, 2015, 27: 2466–247110.1002/adma.201405226 ↗
22. Li B, Zhang X, Wu Z, et al. Over 16% efficiency all-polymer solar cells by sequential deposition. Sci China Chem, 2022, 65: 1157–116310.1007/s11426-022-1247-1 ↗
23. Benten H, Mori D, Ohkita H, et al. Recent research progress ofpolymer donor/polymer acceptor blend solar cells. J Mater Chem A, 2016, 4: 5340–536510.1039/C5TA10759H ↗
24. Xie B, Zhang K, Hu Z, et al. Polymer pre-aggregation enables optimal morphology and high performance in all-polymer solar cells. Sol RRL, 2020, 4: 190038510.1002/solr.201900385 ↗
25. Li S, Jiang T, Zhang H, et al. Nonhalogenated solution-processed donor-dispersed planar heterojunction organic solar cells with enhanced homogeneity in vertical phase separation. Sol RRL, 2023, 7: 220101110.1002/solr.202201011 ↗
26. Jiang K, Zhang J, Peng Z, et al. Pseudo-bilayer architecture enables high-performance organic solar cells with enhanced exciton diffusion length. Nat Commun, 2021, 12: 46810.1038/s41467-020-20791-z ↗
27. Dou C, Long X, Ding Z, et al. An electron-deficient building block based on the B←N unit: An electron acceptor for all-polymer solar cells. Angew Chem Int Ed, 2016, 55: 1436–144010.1002/anie.201508482 ↗
28. Feng K, Huang J, Zhang X, et al. High-performance all-polymer solar cells enabled by n-type polymers with an ultranarrow bandgap down to 1.28 eV. Adv Mater, 2020, 32: 200147610.1002/adma.202001476 ↗
29. Fan Q, Fu H, Wu Q, et al. Multi-selenophene-containing narrow bandgap polymer acceptors for all-polymer solar cells with over 15 % efficiency and high reproducibility. Angew Chem Int Ed, 2021, 60: 15935–1594310.1002/anie.202101577 ↗
30. Wang T, Sun R, Yang XR, et al. A near-infrared polymer acceptor enables over 15% efficiency for all-polymer solar cells. Chin J Polym Sci, 2022, 40: 877–88810.1007/s10118-022-2697-1 ↗
31. Peng F, An K, Zhong W, et al. A universal fluorinated polymer acceptor enables all-polymer solar cells with >15% efficiency. ACS Energy Lett, 2020, 5: 3702–370710.1021/acsenergylett.0c02053 ↗
32. Zhang Y, Wu B, He Y, et al. Layer-by-layer processed binary allpolymer solar cells with efficiency over 16% enabled by finely optimized morphology. Nano Energy, 2022, 93: 10685810.1016/j.nanoen.2021.106858 ↗
33. Chen D, Liu S, Huang B, et al. Rational regulation of the molecular aggregation enables a facile blade-coating process of large-area allpolymer solar cells with record efficiency. Small, 2022, 18: 220073410.1002/smll.202200734 ↗
34. Zhang L, Jia T, Pan L, et al. 15.4% Efficiency all-polymer solar cells. Sci China Chem, 2021, 64: 408–41210.1007/s11426-020-9935-2 ↗
35. Wu Q, Wang W, Wu Y, et al. Tailoring polymer acceptors by electron linkers for achieving efficient and stable all-polymer solar cells. Natl Sci Rev, 2022, 9: nwab15110.1093/nsr/nwab151 ↗
36. Fu H, Fan Q, Gao W, et al. 16.3% Efficiency binary all-polymer solar cells enabled by a novel polymer acceptor with an asymmetrical selenophene-fused backbone. Sci China Chem, 2022, 65: 309–31710.1007/s11426-021-1140-x ↗
37. Fan Q, Fu H, Luo Z, et al. Near-infrared absorbing polymer acceptors enabled by selenophene-fused core and halogenated end-group for binary all-polymer solar cells with efficiency over 16%. Nano Energy, 2022, 92: 10671810.1016/j.nanoen.2021.106718 ↗
38. Liu B, Sun H, Lee JW, et al. Achieving highly efficient all-polymer solar cells by green-solvent-processing under ambient atmosphere. Energy Environ Sci, 2021, 14: 4499–450710.1039/D1EE01310F ↗
39. Cui FZ, Chen ZH, Qiao JW, et al. Ternary-assisted sequential solution deposition enables efficient all-polymer solar cells with tailored vertical-phase distribution. Adv Funct Mater, 2022, 32: 220047810.1002/adfm.202200478 ↗
40. Liao C, Gong Y, Xu X, et al. Cost-efficiency balanced polymer acceptors based on lowly fused dithienopyrrolo[3,2b]benzothiadiazole for 16.04% efficiency all-polymer solar cells. Chem Eng J, 2022, 435: 13486210.1016/j.cej.2022.134862 ↗
41. Liu T, Yang T, Ma R, et al. 16% Efficiency all-polymer organic solar cells enabled by a finely tuned morphology via the design of ternary blend. Joule, 2021, 5: 914–93010.1016/j.joule.2021.02.002 ↗
42. Li Q, Jia T, Wang LM, et al. Superior layer-by-layer deposition realizing P-i-N all-polymer solar cells with efficiency over 16% and fill factor over 77%. J Mater Chem A, 2022, 10: 10880–1089110.1039/D2TA02139K ↗
43. Yu H, Wang Y, Kim HK, et al. A vinylene-linker-based polymer acceptor featuring a coplanar and rigid molecular conformation enables high-performance all-polymer solar cells with over 17% efficiency. Adv Mater, 2022, 34: 220036110.1002/adma.202200361 ↗
44. Jia J, Huang Q, Jia T, et al. Fine-tuning batch factors of polymer acceptors enables a binary all-polymer solar cell with high efficiency of 16.11%. Adv Energy Mater, 2022, 12: 210319310.1002/aenm.202103193 ↗
45. Du J, Hu K, Zhang J, et al. Polymerized small molecular acceptor based all-polymer solar cells with an efficiency of 16.16% via tuning polymer blend morphology by molecular design. Nat Commun, 2021, 12: 526410.1038/s41467-021-25638-9 ↗
46. Sun Y, Ma R, Kan Y, et al. Simultaneously enhanced efficiency and mechanical durability in ternary solar cells enabled by low-cost incompletely separated fullerenes. Macromol Rapid Commun, 2022, 43: 220013910.1002/marc.202200139 ↗
47. Sun H, Liu B, Ma Y, et al. Regioregular narrow-bandgap n-type polymers with high electron mobility enabling highly efficient all-polymer solar cells. Adv Mater, 2021, 33: 210263510.1002/adma.202102635 ↗
48. Ma S, Li B, Gong S, et al. Biselenophene imide: Enabling polymer acceptor with high electron mobility for high-performance all-polymer solar cells. Angew Chem Int Ed, 2023, 62: e20230830610.1002/anie.202308306 ↗
49. Zhang X, Zhang D, Zhou Q, et al. Fluorination with an enlarged dielectric constant prompts charge separation and reduces bimolecular recombination in non-fullerene organic solar cells with a high fill factor and efficiency > 13%. Nano Energy, 2019, 56: 494–50110.1016/j.nanoen.2018.11.067 ↗
50. Bai X, Zong K, Ly J, et al. Orientation control of solution-processed organic semiconductor crystals to improve out-of-plane charge mobility. Chem Mater, 2017, 29: 7571–757810.1021/acs.chemmater.7b02771 ↗
51. Kang H, Zhang X, Xu X, et al. Strongly reduced non-radiative voltage losses in organic solar cells prepared with sequential film deposition. J Phys Chem Lett, 2021, 12: 10663–1067010.1021/acs.jpclett.1c02323 ↗
52. Xie S, Xia Y, Zheng Z, et al. Effects of nonradiative losses at charge transfer states and energetic disorder on the open-circuit voltage in nonfullerene organic solar cells. Adv Funct Mater, 2018, 28: 170565910.1002/adfm.201705659 ↗
53. Sakanoue T, Sirringhaus H. Band-like temperature dependence of mobility in a solution-processed organic semiconductor. Nat Mater, 2010, 9: 736–74010.1038/nmat2825 ↗
54. Speirs MJ, Dirin DN, Abdu-Aguye M, et al. Temperature dependent behaviour of lead sulfide quantum dot solar cells and films. Energy Environ Sci, 2016, 9: 2916–292410.1039/C6EE01577H ↗
55. Zhang M, Guo X, Ma W, et al. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance. Adv Mater, 2015, 27: 4655–466010.1002/adma.201502110 ↗
56. Yu H, Pan M, Sun R, et al. Regio-regular polymer acceptors enabled by determined fluorination on end groups for all-polymer solar cells with 15.2 % efficiency. Angew Chem Int Ed, 2021, 60: 10137–1014610.1002/anie.202016284 ↗
57. Shi Y, Chang Y, Lu K, et al. Small reorganization energy acceptors enable low energy losses in non-fullerene organic solar cells. Nat Commun, 2022, 13: 325610.1038/s41467-022-30927-y ↗
58. Baran D, Gasparini N, Wadsworth A, et al. Robust nonfullerene solar cells approaching unity external quantum efficiency enabled by suppression of geminate recombination. Nat Commun, 2018, 9: 205910.1038/s41467-018-04502-3 ↗
59. Yu G, Gao J, Hummelen JC, et al. Polymer photovoltaic cells: Enhanced efficiencies via a network of internal donor-acceptor heterojunctions. Science, 1995, 270: 1789–179110.1126/science.270.5243.1789 ↗
60. Wang Y, Wang X, Lin B, et al. Achieving balanced crystallization kinetics of donor and acceptor by sequential-blade coated double bulk heterojunction organic solar cells. Adv Energy Mater, 2020, 10: 200082610.1002/aenm.202000826 ↗
61. Lee JW, Phan TNL, Oh ES, et al. Carboxylate-containing poly(thiophene vinylene) derivative with controlled molecular weights for high-performance intrinsically-stretchable organic solar cells. Adv Funct Mater, 2023, 230585110.1002/adfm.202305851 ↗
62. Constantinou I, Yi X, Shewmon NT, et al. Effect of polymer-fullerene interaction on the dielectric properties of the blend. Adv Energy Mater, 2017, 7: 160194710.1002/aenm.201601947 ↗
63. Zhang T, Zhao X, Yang D, et al. Ternary organic solar cells with >11% efficiency incorporating thick photoactive layer and nonfullerene small molecule acceptor. Adv Energy Mater, 2018, 8: 170169110.1002/aenm.201701691 ↗
64. Zhou M, Liao C, Duan Y, et al. 19.10% Efficiency and 80.5% fill factor layer-by-layer organic solar cells realized by 4-bis(2-thienyl)pyrrole-2,5-dione based polymer additives for inducing vertical segregation morphology. Adv Mater, 2023, 35: 220827910.1002/adma.202208279 ↗
65. Li M, Li J, Yu L, et al. Trap-filling of ZnO buffer layer for improved efficiencies of organic solar cells. Front Chem, 2020, 8: 39910.3389/fchem.2020.00399 ↗
66. Zeng Y, Li D, Xiao Z, et al. Exploring the charge dynamics and energy loss in ternary organic solar cells with a fill factor exceeding 80%. Adv Energy Mater, 2021, 11: 210133810.1002/aenm.202101338 ↗
67. Caironi M, Bird M, Fazzi D, et al. Very low degree of energetic disorder as the origin of high mobility in an n-channel polymer semiconductor. Adv Funct Mater, 2011, 21: 3371–338110.1002/adfm.201100592 ↗
68. Paulke A, Stranks SD, Kniepert J, et al. Charge carrier recombination dynamics in perovskite and polymer solar cells. Appl Phys Lett, 2016, 108: 11350510.1063/1.4944044 ↗
69. Zalar P, Kuik M, Ran NA, et al. Effects of processing conditions on the recombination reduction in small molecule bulk heterojunction solar cells. Adv Energy Mater, 2014, 4: 140043810.1002/aenm.201400438 ↗
70. Gasparini N, Wadsworth A, Moser M, et al. The physics of small molecule acceptors for efficient and stable bulk heterojunction solar cells. Adv Energy Mater, 2018, 8: 170329810.1002/aenm.201703298 ↗
71. Zhang X, Li C, Xu J, et al. High fill factor organic solar cells with increased dielectric constant and molecular packing density. Joule, 2022, 6: 444–45710.1016/j.joule.2022.01.006 ↗
72. Zhang X, Yao N, Wang R, et al. On the understanding of energy loss and device fill factor trade-offs in non-fullerene organic solar cells with varied energy levels. Nano Energy, 2020, 75: 10503210.1016/j.nanoen.2020.105032 ↗
73. Xue J, Zhao H, Lin B, et al. Nonhalogenated dual-slot-die processing enables high-efficiency organic solar cells. Adv Mater, 2022, 34: 220265910.1002/adma.202202659 ↗
74. Zhu Q, Xue J, Lu G, et al. Efficient and mechanically-robust organic solar cells based on vertical stratification modulation through sequential blade-coating. Nano Energy, 2022, 97: 10719410.1016/j.nanoen.2022.107194 ↗
75. Shen YF, Zhang H, Zhang J, et al. In situ absorption characterization guided slot-die-coated high-performance large-area flexible organic solar cells and modules. Adv Mater, 2023, 35: 220903010.1002/adma.202209030 ↗
76. Zhang J, Zhang L, Wang X, et al. Reducing photovoltaic property loss of organic solar cells in blade-coating by optimizing micro-nanomorphology via nonhalogenated solvent. Adv Energy Mater, 2022, 12: 220016510.1002/aenm.202200165 ↗
77. Cai J, Fu Y, Guo C, et al. Realizing compact three-dimensional charge transport networks of asymmetric electron acceptors for efficient organic solar cells. Sci China Chem, 2023, 66: 508–51710.1007/s11426-022-1429-x ↗
78. Dong Y, Cha H, Bristow HL, et al. Correlating charge-transfer state lifetimes with material energetics in polymer:non-fullerene acceptor organic solar cells. J Am Chem Soc, 2021, 143: 7599–760310.1021/jacs.1c00584 ↗
79. Lin Y, Zhao F, Wu Y, et al. Mapping polymer donors toward high-efficiency fullerene free organic solar cells. Adv Mater, 2017, 29: 160415510.1002/adma.201604155 ↗
80. Bässler H. Charge transport in disordered organic photoconductors a Monte Carlo simulation study. Physica Status Solidi (b), 1993, 175: 15–5610.1002/pssb.2221750102 ↗
81. Blakesley JC, Neher D. Relationship between energetic disorder and open-circuit voltage in bulk heterojunction organic solar cells. Phys Rev B, 2011, 84: 07521010.1103/PhysRevB.84.075210 ↗