journal article·2022-11

A real-time sensing system based on triboelectric nanogenerator for dynamic response of bridges

He Zhang, KangXu Huang, YuHui Zhou, LiangFeng Sun, ZhiCheng Zhang, JiKui Luo

Publisher page

Abstract

The strain of bridges under traffic loads is time-varying and of small amplitude (∼10−6), which is a type of cumulative response and needs long-term continuous monitoring. To precisely capture the time-varying responses, a dynamic strain triboelectric nanogenerator (TENG) sensor with superior response capability, sensitivity, self-powered, and long-term stability is proposed in this paper. An analytical correlation between the structural strain response signal and the detected electrical signal is established for long-term continuous quantitative strain measurements based on the principles of contact electrification and electrostatic induction. A series of experiments are conducted to investigate the output performance of the proposed lateral-sliding mode TENG sensors. The results reveal that, with the loading condition with frequencies lower than 10 Hz, the time-varying strain responses of the steel bridge within the range of 3 to 150 microstrains can also be detected with high precision of 0.1 microstrains. And it achieves long-term stability after 10000 loading cycles compared with commercial sensors. The proposed novel sensing theory and method based on TENG technology can be applied as a new alternative approach for monitoring realtime structural strain information quantitatively with general applicability and feasibility for bridges.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Advanced Fiber Optic Sensors · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Ni Y Q, Wong K Y, Xia Y. Health checks through landmark bridges to sky-high structures. Adv Struct Eng, 2011, 14: 103–11910.1260/1369-4332.14.1.103 ↗
2. Barrias A, Casas J R, Villalba S. A review of distributed optical fiber sensors for civil engineering applications. Sensors, 2016, 16: 74810.3390/s16050748 ↗
3. Ni Y Q, Xia Y X. Strain-based condition assessment of a suspension bridge instrumented with structural health monitoring system. Int J Str Stab Dyn, 2016, 16: 164002710.1142/S0219455416400277 ↗
4. Ye X W, Yi T H, Su Y H, et al. Strain-based structural condition assessment of an instrumented arch bridge using FBG monitoring data. Smart Struct Syst, 2017, 20: 139–150
5. Yan T, Wu Y, Yi W, et al. Recent progress on fabrication of carbon nanotube-based flexible conductive networks for resistive-type strain sensors. Sens Actuat A-Phys, 2021, 327: 11275510.1016/j.sna.2021.112755 ↗
6. Alwis L S M, Bremer K, Roth B. Fiber optic sensors embedded in textile-reinforced concrete for smart structural health monitoring: A review. Sensors, 2021, 21: 494810.3390/s21154948 ↗
7. Peng L, Jing G, Luo Z, et al. Temperature and strain correlation of bridge parallel structure based on vibrating wire strain sensor. Sensors, 2020, 20: 65810.3390/s20030658 ↗
8. Zhang H, Shen M, Zhang Y, et al. Identification of static loading conditions using piezoelectric sensor arrays. J Appl Mech, 2018, 85: 01100810.1115/1.4038426 ↗
9. Xiang T, Huang K, Zhang H, et al. Detection of moving load on pavement using piezoelectric sensors. Sensors, 2020, 20: 236610.3390/s20082366 ↗
10. Zhang H, Zhou Y, Quan L. Identification of a moving mass on a beam bridge using piezoelectric sensor arrays. J Sound Vib, 2021, 491: 11575410.1016/j.jsv.2020.115754 ↗
11. Zhang H, Huang K, Zhang Z, et al. Piezoelectric energy harvesting from roadways based on pavement compatible package. J Appl Mech, 2019, 86: 09101210.1115/1.4044140 ↗
12. Wei Q, Chen G, Pan H, et al. MXene-sponge based high-performance piezoresistive sensor for wearable biomonitoring and real-time tactile sensing. Small Methods, 2022, 6: 210105110.1002/smtd.202101051 ↗
13. Su Y, Li W, Yuan L, et al. Piezoelectric fiber composites with polydopamine interfacial layer for self-powered wearable biomonitoring. Nano Energy, 2021, 89: 10632110.1016/j.nanoen.2021.106321 ↗
14. Gong S, Zhang J, Wang C, et al. Theoretical and experimental study of a monocharged electret for pressure sensor applications. J Appl Phys, 2021, 129: 03450110.1063/5.0030671 ↗
15. Hou W, Zheng Y, Guo W, et al. Piezoelectric vibration energy harvesting for rail transit bridge with steel-spring floating slab track system. J Cleaner Production, 2021, 291: 12528310.1016/j.jclepro.2020.125283 ↗
16. Lu H, Gao Z, Wu B, et al. Dynamic and quasi-static signal separation method for bridges under moving loads based on long-gauge FBG strain monitoring. J Low Frequency Noise Vib Active Control, 2019, 38: 388–40210.1177/1461348418822375 ↗
17. Wang D, Zhang J, Zhu H. Embedded electromechanical impedance and strain sensors for health monitoring of a concrete bridge. Shock Vib, 2015, 2015: 1–1210.1155/2015/585230 ↗
18. Yu H, He X, Ding W, et al. A self-powered dynamic displacement monitoring system based on triboelectric accelerometer. Adv Energy Mater, 2017, 7: 170056510.1002/aenm.201700565 ↗
19. Zhang H, Yang C, Yu Y, et al. Origami-tessellation-based triboelectric nanogenerator for energy harvesting with application in road pavement. Nano Energy, 2020, 78: 10517710.1016/j.nanoen.2020.105177 ↗
20. Qu Z, Wu L, Yue B, et al. Eccentric triboelectric nanosensor for monitoring mechanical movements. Nano Energy, 2019, 62: 348–35410.1016/j.nanoen.2019.05.061 ↗
21. Chen J, Wang Z L. Reviving vibration energy harvesting and self-powered sensing by a triboelectric nanogenerator. Joule, 2017, 1: 480–52110.1016/j.joule.2017.09.004 ↗
22. Zhang H, Su X, Quan L, et al. Sponge-supported triboelectric nanogenerator for energy harvesting from rail vibration. J Energy Eng, 2021, 147: 0402100610.1061/(ASCE)EY.1943-7897.0000751 ↗
23. Wang A, Chen J, Wang L, et al. Numerical analysis and experimental study of an ocean wave tetrahedral triboelectric nanogenerator. Appl Energy, 2022, 307: 11817410.1016/j.apenergy.2021.118174 ↗
24. Lin S, Zhu L, Qiu Y, et al. A self-powered multi-functional sensor based on triboelectric nanogenerator for monitoring states of rotating motion. Nano Energy, 2021, 83: 10585710.1016/j.nanoen.2021.105857 ↗
25. Garcia C, Trendafilova I, Sanchez del Rio J. Detection and measurement of impacts in composite structures using a self-powered triboelectric sensor. Nano Energy, 2019, 56: 443–45310.1016/j.nanoen.2018.11.055 ↗
26. Wang S, Lin L, Wang Z L. Triboelectric nanogenerators as self-powered active sensors. Nano Energy, 2015, 11: 436–46210.1016/j.nanoen.2014.10.034 ↗
27. Li X, Cao Y, Yu X, et al. Breeze-driven triboelectric nanogenerator for wind energy harvesting and application in smart agriculture. Appl Energy, 2022, 306: 11797710.1016/j.apenergy.2021.117977 ↗
28. Wu B, Zhang Z X, Xue X B, et al. A stretchable triboelectric generator with coplanar integration design of energy harvesting and strain sensing. Sci China Tech Sci, 2022, 65: 221–23010.1007/s11431-020-1808-2 ↗
29. Hu G, Zhao C, Yang Y, et al. Triboelectric energy harvesting using an origami-inspired structure. Appl Energy, 2022, 306: 11803710.1016/j.apenergy.2021.118037 ↗
30. Zhang H, Wang H, Zhang J, et al. A novel rhombic-shaped paper-based triboelectric nanogenerator for harvesting energy from environmental vibration. Sens Actuat A-Phys, 2020, 302: 11180610.1016/j.sna.2019.111806 ↗
31. Yang Y, Hou X J, Geng W P, et al. Human movement monitoring and behavior recognition for intelligent sports using customizable and flexible triboelectric nanogenerator. Sci China Tech Sci, 2022, 65: 826–83610.1007/s11431-021-1984-9 ↗
32. Hu Y, Wang X, Qin Y, et al. A robust hybrid generator for harvesting vehicle suspension vibration energy from random road excitation. Appl Energy, 2022, 309: 11850610.1016/j.apenergy.2021.118506 ↗
33. Su Y, Chen G, Chen C, et al. Self-powered respiration monitoring enabled by a triboelectric nanogenerator. Adv Mater, 2021, 33: 210126210.1002/adma.202101262 ↗
34. Liu B, Libanori A, Zhou Y, et al. Simultaneous biomechanical and biochemical monitoring for self-powered breath analysis. ACS Appl Mater Interfaces, 2022, 14: 7301–731010.1021/acsami.1c22457 ↗
35. Zhang S L, Lai Y C, He X, et al. Auxetic foam-based contact-mode triboelectric nanogenerator with highly sensitive self-Powered strain sensing capabilities to monitor human body movement. Adv Funct Mater, 2017, 27: 160669510.1002/adfm.201606695 ↗
36. Cao Y, Guo Y, Chen Z, et al. Highly sensitive self-powered pressure and strain sensor based on crumpled MXene film for wireless human motion detection. Nano Energy, 2022, 92: 10668910.1016/j.nanoen.2021.106689 ↗
37. Xiao Y, Xu Y, Qu C, et al. Micro-crack assisted wrinkled PEDOT:PSS to detect and distinguish tensile strain and pressure based on a tribo-electric nanogenerator. Adv Mater Technol, 2022, 7: 210042310.1002/admt.202100423 ↗
38. Su Y, Xie G, Tai H, et al. Self-powered room temperature NO2 detection driven by triboelectric nanogenerator under UV illumination. Nano Energy, 2018, 47: 316–32410.1016/j.nanoen.2018.02.031 ↗
39. Pang Y K, Li X H, Chen M X, et al. Triboelectric nanogenerators as a self-powered 3D acceleration sensor. ACS Appl Mater Interf, 2015, 7: 19076–1908210.1021/acsami.5b04516 ↗
40. Li S, Liu D, Zhao Z, et al. A fully self-powered vibration monitoring system driven by dual-mode triboelectric nanogenerators. ACS Nano, 2020, 14: 2475–248210.1021/acsnano.9b10142 ↗
41. Ye X W, Su Y H, Han J P. A state-of-the-art review on fatigue life assessment of steel bridges. Math Problems Eng, 2014, 2014: 1–13
42. Ni Y Q, Ye X W, Ko J M. Monitoring-based fatigue reliability assessment of steel bridges: Analytical model and application. J Struct Eng, 2010, 136: 1563–157310.1061/(ASCE)ST.1943-541X.0000250 ↗
43. ASCE Committee on Fatigue and Fracture Reliability. Fatigue reliability: Development of criteria for design. J Struct Div ASCE, 1982, 108: 71–8810.1061/JSDEAG.0005871 ↗
44. Deng L, Nie L, Zhong W, et al. Developing fatigue vehicle models for bridge fatigue assessment under different traffic conditions. J Bridge Eng, 2021, 26: 0402012210.1061/(ASCE)BE.1943-5592.0001675 ↗
45. Farreras-Alcover I, Chryssanthopoulos M K, Andersen J E. Data-based models for fatigue reliability of orthotropic steel bridge decks based on temperature, traffic and strain monitoring. Int J Fatigue, 2017, 95: 104–11910.1016/j.ijfatigue.2016.09.019 ↗
46. Li Z. Fatigue analysis and life prediction of bridges with structural health monitoring data—Part I: Methodology and strategy. Int J Fatigue, 2001, 23: 45–5310.1016/S0142-1123(00)00068-2 ↗
47. Zhang H, Yao L, Quan L, et al. Theories for triboelectric nanogenerators: A comprehensive review. Nanotechnol Rev, 2020, 9: 610–62510.1515/ntrev-2020-0049 ↗
48. Zhang H, Zhang C, Zhang J, et al. A theoretical approach for optimizing sliding-mode triboelectric nanogenerator based on multiparameter analysis. Nano Energy, 2019, 61: 442–45310.1016/j.nanoen.2019.04.057 ↗
49. Zhang H, Quan L, Chen J, et al. A general optimization approach for contact-separation triboelectric nanogenerator. Nano Energy, 2019, 56: 700–70710.1016/j.nanoen.2018.11.062 ↗
50. Wang Z L. On Maxwell’s displacement current for energy and sensors: The origin of nanogenerators. Mater Today, 2017, 20: 74–8210.1016/j.mattod.2016.12.001 ↗
51. Shao J J, Jiang T, Wang Z L. Theoretical foundations of triboelectric nanogenerators (TENGs). Sci China Tech Sci, 2020, 63: 1087–110910.1007/s11431-020-1604-9 ↗
52. Li T, Xu Y, Willander M, et al. Lightweight triboelectric nanogenerator for energy harvesting and sensing tiny mechanical motion. Adv Funct Mater, 2016, 26: 4370–437610.1002/adfm.201600279 ↗
53. Zhang B, Zhang L, Deng W, et al. Self-powered acceleration sensor based on liquid metal triboelectric nanogenerator for vibration monitoring. ACS Nano, 2017, 11: 7440–744610.1021/acsnano.7b03818 ↗
54. Wang Z L. Triboelectric nanogenerators as new energy technology for self-powered systems and as active mechanical and chemical sensors. ACS Nano, 2013, 7: 9533–955710.1021/nn404614z ↗