Dimensional synthesis of a 3-DOF parallel manipulator based on dimensionally homogeneous Jacobian matrix
Source abstract
Abstract
A study of dimensional synthesis of a 3-DOF parallel manipulator with coupling of translation and rotation is carried out. The architecture of the manipulator is composed of a moving platform attached to a fixed base through three identical PRS (prismatic-revolute-spherical) serial limbs, whose unique topology leads to the physical unit inconsistency of the conventional Jacobian matrix and the emergence of the parasitic motion. Then this paper introduces a kinetostatic performance index of the manipulator based on the condition of a dimensionally homogeneous Jacobian matrix, later, the workspace of the aforementioned manipulator is searched and the influence of the crucial design variables on the workspace is analyzed. Finally, a dimensional synthesis method of the manipulator is proposed, which may be regarded as a nonlinear programming problem with subject to the parasitic motion and other several engineering constraints.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Robotic Mechanisms and Dynamics · Piezoelectric Actuators and Control · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. The DS Technologie Company. http://www.ds-technologie.de , 2008
2. Hennes N. Ecospeed: an innovative machining concept for high performance 5-axis-machining of large structural component in aircraft engineering. In: Proceedings of the 3rd Chemnitz Parallel Kinematic Seminar, Chemnitz, Germany, 2002. 763–774
3. Carretero J A, Nahon M, Gosselin C M, et al. Kinematic analysis of a three-DOF parallel mechanism for telescope application. In: Proceedings of the 2007 ASME Design Automation Conference, Sacramento, California, 199710.1115/DETC97/DAC-3981 ↗
4. Tsai M S, Shiau T N, Tsai Y J, et al. Direct kinematic analysis of a 3-PRS parallel mechanism. Mech Mach Theory, 2003, 38(1): 71–8310.1016/S0094-114X(02)00069-1 ↗
5. Li Y G, Song Y M, Feng Z Y, et al. Inverse dynamics of 3-PRS parallel mechanism by Newton-Euler formulation (in Chinese). Acta Aeron Astron Sin, 2007, 28: 1210–1215
6. Zhang F, Yang J G, Li B Z. Kinematic characteristic analysis of 3-PRS parallel manipulator. J Donghua U, 2008, 25: 78–81
7. Carretero J A, Nahon M A, Pondhorodeski R P. Workspace analysis and optimization of a novel 3-DOF parallel manipulator. Int J Robotics Autom, 2000, 15: 178–188
8. Cheng X, Huang Y, Gao F, et al. Research on gesture distribution in the reachable workspace of 3-DOF parallel robot (in Chinese). Mach Des Res, 2005, 21: 22–25
9. Kumar V. Characterization of workspace of parallel manipulators. J Mech Des, 1992, 114: 368–37510.1115/1.2926562 ↗
10. Carretero J A, Podhorodeski R P, Nahon K A, et al. Kinematic analysis and optimization of a new three degree-of-freedom (DOF) spatial manipulator. J Mech Des, 2000, 122: 17–2410.1115/1.533542 ↗
11. Geoffrey P, Carretero G A. Formulating Jacobian matrices for dexterity analysis of parallel mechanism. Mech Mach Theory, 2006, 41: 1505–151910.1016/j.mechmachtheory.2006.01.003 ↗
12. Kim S K, Ryu J. New dimensionally homogeneous Jacobian matrix formulation by Three End-Effector Points for optimal design of parallel manipulators. IEEE Trans Robotics Automat, 2003, 19: 731–73710.1109/TRA.2003.814496 ↗
13. Gosselin C M. The optimum design of robotic manipulators using dexterity indices. Robot Auton Syst, 1992, 9: 213–22610.1016/0921-8890(92)90039-2 ↗
14. Ottaviano E, Ceccarelli M. Optimal design of CaPaMan (cassino parallel manipulator) with a specified orientation workspace. Robotica, 2002, 20: 159–166.10.1017/S026357470100385X ↗
15. Gosselin C, Angeles J. The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator. ASME J Mech Transm Autom Des, 1989, 111: 202–20710.1115/1.3258984 ↗
16. Chablat D, Wenger P. Architecture optimization of a 3-DOF parallel mechanism for machining applications: the orthoglide. IEEE Trans Rob Autom, 2003, 19: 403–41010.1109/TRA.2003.810242 ↗
17. Liu X J, Wang J S. A new methodology for optimal kinematic design of parallel mechanisms, Mech Mach Theory, 2007,42: 1210–122410.1016/j.mechmachtheory.2006.08.002 ↗
18. Liu X J, Bonev I A. Orientation capability, error analysis, and dimensional optimization of two articulated tool heads with parallel kinematics, ASME J Manuf Sci Eng, 2008, 130, 011015: 1–910.1016/j.msea.2008.01.048 ↗
19. Huang T, Whitehouse D J, Wang J. Local dexterity, optimum architecture and design criteria of parallel machine tools. CIRP Ann, 1998, 47: 347–35110.1016/S0007-8506(07)62848-0 ↗
20. Huang T, Gosselin C M, Whitehouse D J. Analytic approach for optimal design of a type of spherical parallel manipulators. Part C: J Mech Eng Sci, 2003, 217: 447–455
21. Gosselin C M, Angeles J. Global performance index for the kinematics optimization of robotic manipulators. ASME J Mech Des Trans, 1991, 113: 220–22610.1115/1.2912772 ↗
22. Huang T, Li M, Zhao X M, et al. Conceptual design and dimensional synthesis for a 3-DOF module of the TriVariant-A novel 5-DOF reconfigurable hybrid robot. IEEE Trans Robotics, 2005, 21: 449–45610.1109/TRO.2004.840908 ↗