journal article·2012-07

Microstructures and mechanical properties of the third generation automobile steels fabricated by ART-annealing

WenQuan Cao, Chang Wang, CunYu Wang, Jie Shi, MaoQiu Wang, Han Dong, YuQing Weng

Publisher page

Abstract

The mechanical properties dependence on the microstructure was reviewed and analyzed, and the ultrafine grained duplex microstructure of BCC matrix and large fractioned austenite was given as one of the optimum structures to develop the third generation steel with high strength and high ductility. The medium-Mn steels with different carbon contents processed by austenite reverted transformation (ART-annealing) were studied thoroughly to fabricate the ultrafine duplex steels with large fractioned austenite. The lamellar typed ultrafine structure, the granular typed ultrafine duplex structure and the corresponding mechanical properties of the medium-Mn steels processed by ART-annealing were demonstrated in this paper. It was revealed that the duplex structure with large fraction of austenite and ultrafine grain structure is capable of producing steels with excellent combination of strength and ductility, i.e., Rm×A about 30–50 GPa%, which is about two times of that of the conventional automobile steels and close to that of the TWIP steels. It was concluded that the ART-annealing of the medium-Mn steels would be at least one of the promising ways to fabricate the third generation automobile steels in the near future.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Sugimoto K, Iida T, Sakaguchi J, et al. Retained austenite characteristics and tensile properties in a TRIP type bainitic sheet steel. ISIJ Int, 2000, 40(9): 902–90810.2355/isijinternational.40.902 ↗
2. Sugimoto K, Yu B, Mukai Y, et al. Microstructure and formability of aluminum bearing TRIP-aided steels with annealed martensite matrix. ISIJ Int, 2005, 9: 1194–120010.2355/isijinternational.45.1194 ↗
3. Frommeyer G, Brux U, Neumann P, et al. Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes. ISIJ Int, 2003, 43:438–44610.2355/isijinternational.43.438 ↗
4. Gazder A A, Cao W Q, Davies C H J, et al. An EBSD investigation of interstitial-free steel subjected to equal channel angular extrusion. Mater Sci Eng A, 2008, 497: 341–35210.1016/j.msea.2008.07.030 ↗
5. Tao K X, Choo H, Li H Q, et al. Transformation-induced plasticity in an ultrafine-grained steel: An in situ neutron diffraction study. Appl Phys Lett, 2007, 90: 10191110.1063/1.2711758 ↗
6. Jacques P, Furnemont Q, Mertens A, et al. On the sources of work hardening in multiphase steels assisted by transformation-induced plasticity. Phil Mag A, 2001, 81: 1789–181210.1080/01418610108216637 ↗
7. Miller R L. Ultrafine-grained microstructures and mechanical properties of alloy steels. Met Trans B, 1972, 3: 905–91210.1007/BF02647665 ↗
8. Niikura M, Morris J W. Thermal processing of ferritic 5Mn steel for toughness at cryogenic temperatures. Met Trans A, 1980, 11: 1531–154010.1007/BF02654516 ↗
9. Han H N, Oh C S, Kim G, et al. Design method for TRIP-aided multiphase steel based on a microstructure-based modeling for transformation-induced plasticity and mechanically induced martensitic transformation. Mater Sci Eng A, 2009, 499: 462–46810.1016/j.msea.2008.09.026 ↗
10. Luo H W, Shi J, Wang C, et al. Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel. Acta Mater, 2011, 59: 4002–401410.1016/j.actamat.2011.03.025 ↗
11. Wang C, Shi J, Wang C Y, et al. Development of ultrafine lamellar ferrite and austenite duplex structure in 0.2C5Mn Steel during ART-annealing. ISIJ Int, 2011, 51: 651–65610.2355/isijinternational.51.651 ↗
12. Shi J, Sun X J, Wang M Q, et al. Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite. Scr Mater, 2010, 63: 815–81810.1016/j.scriptamat.2010.06.023 ↗
13. Cao W Q, Wang C, Shi J, et al. Microstructure and mechanical properties of Fe-0.2C-5Mn steel processed by ART-annealing. Mater Sci Eng A, 2011, 528: 6661–666610.1016/j.msea.2011.05.039 ↗
14. Cao W Q, Shi J, Wang C, et al. Advanced Steels. Berlin: Springer, 2011. 209–22710.1007/978-3-642-17665-4_22 ↗
15. Cao W Q, Wang C Y, Shi J, et al. Application of quenching and partitioning to improve the ductility of ultrahigh strength low alloy steel. Mater Sci Forum, 2010, 654-656: 29–3210.4028/www.scientific.net/MSF.654-656.29 ↗
16. Heimbuch R, Overview: Auto/Steel partnership, http://www.a-sp.org
17. Garcia-Mateo C, Caballero F G. Ultra-high-strength bainitic steels. ISIJ Int, 2005, 45: 1736–174010.2355/isijinternational.45.1736 ↗
18. De Cooman B C. Structure-properties relationship in TRIP-steels containing carbide-free bainite. Current Opinion Solid State Mater Sci, 2004, 8: 285–30310.1016/j.cossms.2004.10.002 ↗
19. Jacques P, Furnemont Q, Mertens A, et al. On the sources of work-hardening in multiphase steels assisted by transformation-induced plasticity. Phil Mag A, 2001, 81: 1789–181210.1080/01418610108216637 ↗
20. Girault E, Martens A, Jacques P, et al. Comparison of the effects of silicon and aluminum on the tensile behaviour of multiphase TRIP-assisted steels. Scr Mater, 2001, 44: 885–89210.1016/S1359-6462(00)00697-7 ↗
21. Pereloma E V, Timokhina I B, Hodgson P D. Transformation behavior in thermomechanically processed C-Mn-Si TRIP steels with and without Nb. Mater Sci Eng A, 1999, 273-275: 448–45210.1016/S0921-5093(99)00325-1 ↗
22. Yong Q L. The Second Phase in Steels. Beijing: China Science Press, 1980. 6–9
23. Fletcher H A, Garratt-Reed A J, Aaronson H I, et al. A STEM method for investigating alloying element accumulation at austenite-ferrite boundaries in an Fe-C-Mo alloy. Scr Mater, 2001, 45: 561–56710.1016/S1359-6462(01)01060-0 ↗
24. Hackenberg R E, Shiflet G J. A microanalysis study of the bainite reaction at the bay in Fe-C-Mo. Acta Mater, 2003, 51: 2131–214710.1016/S1359-6454(02)00562-1 ↗
25. Humphreys E S, Flectcher H A, Hutchins J D, et al. Molybdenum accumulation at ferrite: Austenite interfaces during isothermal transformation of an Fe-0.24 pct C-0.93 pct Mo alloy. Metall Mater Trans A, 2004, 35: 1223–123510.1007/s11661-004-0296-0 ↗
26. Humphreys F J, Hatherly M. Recrystallization and Related Annealing Phenomena. Oxford: Pergamon, 1995. 189
27. Dmitrieva O, Ponge D, Inden G, et al. Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation. Acta Mater, 2011, 59: 364–37410.1016/j.actamat.2010.09.042 ↗
28. Yu H, Ren H, Kang Y L, et al. Carbon diffusion in hot strips of low carbon steel produced by CSP line under different thermal histories. Sci China Tech Sci, 2005, 21(1): 21–24
29. Kocks U F, Mecking H. The physics and phenomenology of strain hardening. Prog Mater Sci, 2003, 48: 171–27310.1016/S0079-6425(02)00003-8 ↗
30. Hughes D A, Hansen N. Microstructure and strength of nickel at large strains. Acta Mater, 2000, 48: 2985–300410.1016/S1359-6454(00)00082-3 ↗