Characteristics of dry friction backward whirl—A self-excited oscillation in rotor-to-stator contact systems
Source abstract
Abstract
In this paper, the response characteristics of dry friction backward whirl of a general rotor/stator model, which accounts for both the dynamics of the rotor and the stator as well as the friction and the deformation at the contact surfaces, are investigated. The existence boundaries and the whirl frequencies of the dry friction backward whirl are determined analytically. It is found that there are two or three existence boundaries of the dry friction backward whirl that usually form two existence regions, either standing completely separately, or overlapping each other partly, or one containing the other completely, depending upon the system parameters. The whirl frequencies in the two existence regions are quite different and may jump between the lower and the higher values with the variation of the rotating speed. The results have been found to have good correspondence in the related rotor/stator rubbing experiments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Bearings and Levitation Dynamics · Brake Systems and Friction Analysis · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Baker J G. Self-induced vibration. ASME, J Appl Mech, 1933, 1: 5–1210.1115/1.4012165 ↗
2. Black H F. Interaction of a whirling rotor with a vibrating stator across a clearance annulus. Intl J Mech Eng Sci, 1968, 10: 1–1210.1243/JMES_JOUR_1968_010_003_02 ↗
3. Muszynska A. Synchronous self-excited rotor vibration caused by a full annular rub. Machinery Dynamics 8th Seminar, Halifax, Nova Scotia, Canada, 1984
4. Lingener A. Experimental investigation of reverse whirl of a flexible rotor. Transactions of IFToMM 3rd International Conference on Rotordynamics, Lyon, France, 1990. 13–18
5. Wu F, Flowers G T. An experimental study of the influence of disk flexibility and rubbing on rotordynamics. ASME, Vib Rotat Syst, 1993, DE-Vol.60: 19–2610.1115/DETC1993-0178 ↗
6. Bently D E, Yu J J, Goldman P. Full annular rub in mechanical seals, Part I: Experimental results. Proc. of ISROMAC-8, Honolulu, Hawaii, USA, 200010.1080/1023-620291910743 ↗
7. Zhang W. Dynamic instability of multi-degree-of-freedom flexible rotor systems due to full annular rub. IMechE C252/88, 1998, 305–308
8. Crandall S. From whirl to whip in Rrtordynamics. Transactions of IFToMM 3rd International Conference on Rotordynamics, Lyon, France, 1990. 19–26
9. Bently D E, Goldman P, Yu J J. Full annular rub in mechanical seals, Part II: Analytical study. Proc. of ISROMAC-8, Honolulu, Hawaii, USA, 200010.1155/S1023621X02000313 ↗
10. Jiang J, Ulbrich H. The physical reason and the analytical condition for the onset of dry whip in rotor-to-stator contact systems. ASME J Acoust Vib, 2004, 127: 594–60310.1115/1.1888592 ↗
11. Jiang J. The analytical solution and existence condition of dry friction backward whirl in rotor-to-stator contact systems. ASME J Acoust Vib, 2007, 129: 260–26410.1115/1.2345677 ↗
12. Choi Y S. Investigation on the whirling motion of full annular rotor rub. J Sound Vib, 2002, 258: 191–19810.1006/jsvi.2002.5091 ↗