journal article·2012-07

Stress-strain behavior of multi-phase high performance structural steel

WenJin Nie, XueMin Wang, ShengJie Wu, HaiLong Guan, ChengJia Shang

Publisher page

Abstract

A series of ferrite/bainite (F/B) multi-phase steels containing different volume fractions of ferrite were obtained. The effect of soft phase (ferrite) content on the work-hardening behavior of the steel was studied by the finite element simulation with V-BCC model and the modified Crussard-Jaoul (C-J) analysis. It is shown that the multi-phase steels have an excellent anti-deformation ability, such as higher stress ratio (R t1.5/R t0.5), higher uniform elongation and lower yield to tensile strength ratio. For the F/B multi-phase steels, increasing the proportion of ferrite would help to increase the uniform elongation. However, introducing much more fraction of ferrite would not be helpful to improve the stress ratio of multi-phase steel. The ferrite plastic strain constrained by bainite would be beneficial to increasing the work hardening rate. The optimum proportion of ferrite will result both higher stress ratio and uniform elongation in multi-phase steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Thompson S W, Colvin D J, Krass G. Continuous cooling transformation and microstructures in a low-carbon, high-strengh low-alloy plate steel. Metall Trans A, 1990, 21: 1493–150710.1007/BF02672564 ↗
2. Araki T, Kozasu I, Tankechi H, et al., eds. Atlas for bainitic microstructures, Vol. 1. Tokyo: ISIJ, 1992
3. Krauss G, Thomposon T W. Ferritic microstructure in continuously cooled low and ultralow carbon steels. ISIJ Int, 1995, 35: 937–94510.2355/isijinternational.35.937 ↗
4. Zhao Y T, Shang C J, Yang S W, et al. The metastable austenite transformation in Mo-Nb-Cu-B low carbon steel. Mater Sci Eng A, 2006, 433: 169–17410.1016/j.msea.2006.06.048 ↗
5. Shang C J, Wang X M, Zhou Z J, et al. Evolution of intermediate transformation microstructure in Mn-Mo-Nb-B low carbon microalloyed steel. Acta Metall Sin, 2008, 44(3): 287–291
6. DeArdo A J. Muti-phase microstructures and their properties in high strength low carbon steels. ISIJ Int, 1995, 35(8): 946–95410.2355/isijinternational.35.946 ↗
7. Shang C J, Zhao Y T, Wang X M, et al. Formation and control of the acicular ferrite in low carbon microalloying steel. Mater Sci Forum, 2005, 475-479: 85–8910.4028/www.scientific.net/MSF.475-479.85 ↗
8. Suzuki N, Toyota M. Seismic loading on buried pipelines and deformability of high strength linepipes. Proceedings of Pipeline Technology Conference, 2004. 601–628
9. Fujibayashi A, Omata K. JFE steel’s advanced manufacturing tech nologies of leading high performance steel plates. JFE Technical Report, 2005, 5: 11–15
10. Danielson M, Parks D M, Boyce M C. Three-dimensional micromechanical modeling of voided polymeric materials. J Mech Phys Solids, 2002, 50: 351–37910.1016/S0022-5096(01)00060-6 ↗
11. Ishikawa N, Parks D M, Socrate S, et al. Micromechanical modeling of ferrite-pearlite steels using finite element unit cell models. ISIJ Int, 2000, 40: 1170–117910.2355/isijinternational.40.1170 ↗
12. Jiang Z, Guan Z, Lian J. The relationship between ductility and material parameters for dual-phase steel. J Mater Sci, 1993, 28: 1814–181810.1007/BF00595750 ↗
13. Son Y I, Lee Y K, Park K T, et al. Ultrafine grained ferrite-martensite dual phase steels fabricated via equal channel angular pressing: Microstructure and tensile properties. Acta Mater, 2005, 53: 3125–313410.1016/j.actamat.2005.02.015 ↗
14. Podder S, Bhattacharjee D, Ray R K. Effect of martensite on the mechanical behavior of ferrite-bainite dual phase steels. ISIJ Int, 2007, 47(7): 1058–106410.2355/isijinternational.47.1058 ↗
15. Umemoto M, Liu Z G, Sugimoto S, et al. Tensile stress-strain analysis of single-structure steels. Metall Mater Trans A, 2000, 32:1785–179410.1007/s11661-006-0249-x ↗
16. Kumar A, Singh S B, Ray R K. Influence of bainite/martensite-content on the tensile properties of low carbon dual-phase steels. Mater Sci Eng A, 2008, 474: 270–28210.1016/j.msea.2007.05.007 ↗
17. Bag A, Ray K K, Dwarkadasa E S. Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels. Metall Trans A, 1999, 30: 1193–120210.1007/s11661-999-0269-4 ↗