journal article·2017-12

A comparative study of surface waviness models for predicting vibrations of a ball bearing

Jing Liu, Hao Wu, YiMin Shao

Publisher page

Abstract

Surface waviness models utilized to describe the excitation events in the ball bearings (BABs) play an important role in predicting the vibrations of the ball bearing systems. This work proposes a comparative study on the most relevant existing surface waviness models. One model is named as time-varying displacement (TVD) model, which can only describe the time-varying displacement excitation (TDIE). Another model is named as TVDS model, which can describe the TDIE and time-varying contact stiffness coefficient excitation (TCSE). The influences of the wave number, maximum amplitude, nonuniform distribution on the contact stiffness coefficients are studied, as well as vibrations of the BAB. The comparative results demonstrate that the time-varying displacement and stiffness (TVDS) model can provide a more accurate impulses caused by the uniform and nonuniform surface waviness on the races of the BABs. It also seems that the surface waviness distribution has a significantly influence on vibrations of the BABs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gear and Bearing Dynamics Analysis · Advanced machining processes and optimization · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Niu L, Cao H, He Z, et al. Dynamic modeling and vibration response simulation for high speed rolling ball bearings with localized surface defects in raceways. J Manuf Sci Eng, 2014, 136: 04101510.1115/1.4027334 ↗
2. Niu L, Cao H, He Z, et al. A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects. J Sound Vibr, 2015, 357: 207–23210.1016/j.jsv.2015.08.002 ↗
3. Zhao M, Lin J, Xu X, et al. Tacholess envelope order analysis and its application to fault detection of rolling element bearings with varying speeds. Sensors, 2013, 13: 10856–1087510.3390/s130810856 ↗
4. Zhao M, Lin J, Miao Y, et al. Detection and recovery of fault impulses via improved harmonic product spectrum and its application in defect size estimation of train bearings. Measurement, 2016, 91: 421–43910.1016/j.measurement.2016.05.068 ↗
5. Jalalahmadi B, Sadeghi F. A voronoi FE fatigue damage model for life scatter in rolling contacts. J Tribol, 2010, 132: 02140410.1115/1.4001012 ↗
6. Liu J, Shao Y. Dynamic modeling for rigid rotor bearing systems with a localized defect considering additional deformations at the sharp edges. J Sound Vibr, 2017, 398: 84–10210.1016/j.jsv.2017.03.007 ↗
7. Tallian T E, Gustafsson O G. Progress in rolling bearing vibration research and control. ASLE Trans, 1965, 8: 195–20710.1080/05698196508972094 ↗
8. Tandon N, Choudhury A. A theoretical model to predict the vibration response of rolling bearings in a rotor bearing system to distributed defects under radial load. J Tribol, 2000, 122: 609–61510.1115/1.555409 ↗
9. Lynagh N, Rahnejat H, Ebrahimi M, et al. Bearing induced vibration in precision high speed routing spindles. Int J Mach Tool Manu, 2000, 40: 561–57710.1016/S0890-6955(99)00076-0 ↗
10. Wensing J A, van Nijen G C. The dynamic behaviour of a system that includes a rolling bearing. J Eng Tribol, 2001, 215: 509–518
11. Jang G, Jeong S W. Vibration analysis of a rotating system due to the effect of ball bearing waviness. J Sound Vibr, 2004, 269: 709–72610.1016/S0022-460X(03)00127-5 ↗
12. Sopanen J, Mikola A. Dynamic model of a deep-groove ball bearing including localized and distributed defects-part 1: Theory. J Multibody Dyn, 2003, 217: 201–211
13. Harsha S P, Kankar P K. Stability analysis of a rotor bearing system due to surface waviness and number of balls. Int J Mech Sci, 2004, 46: 1057–108110.1016/j.ijmecsci.2004.07.007 ↗
14. Harsha S P, Sandeep K, Prakash R. Nonlinear dynamic response of a rotor bearing system due to surface waviness. Nonlinear Dynam, 2004, 37: 91–11410.1023/B:NODY.0000042916.10351.ff ↗
15. Bai C Q, Xu Q Y. Dynamic model of ball bearings with internal clearance and waviness. J Sound Vibr, 2006, 294: 23–4810.1016/j.jsv.2005.10.005 ↗
16. Wang L Q, Cui L, Zheng D Z, et al. Nonlinear dynamics behaviors of a rotor roller bearing system with radial clearances and waviness considered. Chin J Aeronautics, 2008, 21: 86–9610.1016/S1000-9361(08)60012-6 ↗
17. Cao M, Xiao J. A comprehensive dynamic model of double-row spherical roller bearing—Model development and case studies on surface defects, preloads, and radial clearance. Mech Syst Signal Pr, 2008, 22: 467–48910.1016/j.ymssp.2007.07.007 ↗
18. Kankar P K, Harsha S P, Kumar P, et al. Fault diagnosis of a rotor bearing system using response surface method. Eur J Mech-A/Solids, 2009, 28: 841–85710.1016/j.euromechsol.2009.03.004 ↗
19. Babu C K, Tandon N, Pandey R K. Vibration modeling of a rigid rotor supported on the lubricated angular contact ball bearings considering six degrees of freedom and waviness on balls and races. J Vib Acoust, 2012, 134: 01100610.1115/1.4005140 ↗
20. Hwang P, Nguyen V T. Dynamic model to predict effect of race waviness on vibrations associated with deep-groove ball bearing. J Korean Soc Tribologis Lubr Eng, 2014, 30: 64–7010.9725/kstle.2014.30.1.64 ↗
21. Xu L X, Li Y. Modeling of a deep-groove ball bearing with waviness defects in planar multibody system. Multibody Syst Dyn, 2015, 33: 229–25810.1007/s11044-014-9413-z ↗
22. Xu L X, Yang Y H. Modeling a non-ideal rolling ball bearing joint with localized defects in planar multibody systems. Multibody Syst Dyn, 2015, 35: 409–42610.1007/s11044-015-9473-8 ↗
23. Liu J, Shao Y. Vibration modelling of nonuniform surface waviness in a lubricated roller bearing. J Vib Control, 2017, 23: 1115–113210.1177/1077546315589675 ↗
24. Johnson K L. Contact Mechanics. Cambridge: Cambridge University Press, 198510.1017/CBO9781139171731 ↗
25. Dareing D W, Johnson K L. Fluid film damping of rolling contact vibrations. J Mech Eng, 1975, 17: 214–218
26. Liu J, Shao Y, Zhu W D. A new model for the relationship between vibration characteristics caused by the time-varying contact stiffness of a deep groove ball bearing and defect sizes. J Tribol, 2015, 137: 03110110.1115/1.4029461 ↗
27. Liu J, Shao Y. A new dynamic model for vibration analysis of a ball bearing due to a localized surface defect considering edge topographies. Nonlinear Dynam, 2015, 79: 1329–135110.1007/s11071-014-1745-y ↗
28. Harris T A, Kotzalas M N. Rolling Bearing Analysis-Essential Concepts of Bearing Technology. 5th Ed. New York: Taylor and Francis, 2007
29. Sunnersjö C S. Varying compliance vibrations of rolling bearings. J Sound Vibr, 1978, 58: 363–37310.1016/S0022-460X(78)80044-3 ↗
30. Liu J, Shao Y, Lim T C. Vibration analysis of ball bearings with a localized defect applying piecewise response function. Mech Mach Theory, 2012, 56: 156–16910.1016/j.mechmachtheory.2012.05.008 ↗
31. Kabus S, Hansen M R, Mouritsen O O. A new quasi-static cylindrical roller bearing model to accurately consider non-hertzian contact pressure in time domain simulations. J Tribol, 2012, 134: 04140110.1115/1.4007219 ↗
32. Liu J, Shi Z, Shao Y. An analytical model to predict vibrations of a cylindrical roller bearing with a localized surface defect. Nonlinear Dynam, 2017, 89: 2085–210210.1007/s11071-017-3571-5 ↗
33. Wardle FP. Vibration forces produced by waviness of the rolling surface of thrust loaded ball bearings part 2: Experimental validation. Proc Instn Mech Engrs, 1988, 202: 313–319