journal article·2013-09

Multi-parameter optimization design, numerical simulation and performance test of mixed-flow pump impeller

Hao Bing, ShuLiang Cao

Publisher page

Abstract

On the basis of the three-dimensional design platform of the mixed-flow pump impellers, an optimization design system was developed in this paper by improving the genetic algorithm with application of both strategies of keeping the optimal individual and employing the niche. This system took the highest efficiency of the impeller as the optimization objective and employed P, a0, h and t, which could directly affect the shape and the position of the blade, as optimization parameters. In addition, loss model was used to obtain fast and accurate prediction of the impeller efficiency. The optimization results illustrated that this system had advantages such as high accuracy and fine convergence, thus to effectively improve the design of the mixed-flow pump impellers. Numerical simulation was applied to determine the internal flow fields of the impeller obtained by optimization design, and to analyze both the relative velocity and the pressure distributions. The test results demonstrated that the mixed flow pump had the highest efficiency of 87.2%, the wide and flat high efficiency operation zone, the relatively wide range of blade angle adjustment, fine cavitation performance and satisfied stability. mixed-flow pump, impeller, optimization design, performance test, numerical simulation
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cavitation Phenomena in Pumps · Hydraulic and Pneumatic Systems · Water Systems and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Goto A, Nohmi M, Sakurai T, et al. Hydrodynamic design system for pumps based on 3-D CAD, CFD, and inverse design method. ASME J Fluids Eng, 2002, 124(2): 329–33510.1115/1.1471362 ↗
2. Goto A, Zangeneh M. Hydrodynamic design of pump diffuser using inverse design method and CFD. ASME J Fluids Eng, 2002, 124(2): 319–32810.1115/1.1467599 ↗
3. Kim S, Choi Y S, Lee K Y. Design optimization of mixed-flow pump impellers and diffusers in a fixed meridional shape. Proceedings of the 10th Asian International Conference on Fluid Machinery. Univ Teknologi Malaysia, Kuala Lumpur, Malaysia, 2009. 287–296
4. Oh H W, Kim K Y. Conceptual design optimization of mixed-flow pump impellers using mean streamline analysis. Proc Instn Mech Engrs, Part A: J Power Energy, 2001, 215(A1): 133–13810.1243/0957650011536499 ↗
5. Oh H W, Yoon E S, Kim K S, et al. A practical approach to the hydraulic design and performance analysis of a mixed-flow pump for marine waterjet propulsion. Proc Instn Mech Engrs, Part A: J Power Energy, 2003, 217(A6): 659–66410.1177/095765090321700610 ↗
6. Esch B P M van, Kruyt N P. Hydraulic performance of a mixed-flow pump: unsteady inviscid computations and loss models. ASME J Fluids Eng, 2001, 123(2): 256–26410.1115/1.1365121 ↗
7. Oh H W, Yoon E S. Hydrodynamically detailed performance analysis of a mixed-flow waterjet pump using computational fluid dynamics. Proc Instn Mech Engrs, Part C: J Mech Eng Sci, 2008, 222(C9): 1861–186710.1243/09544062JMES1107 ↗
8. Oh H W, Yoon E S, Park M R, et al. Hydrodynamic design and performance analysis of a centrifugal blood pump for cardiopulmonary circulation. Proc Instn Mech Engrs, Part A: J Power Energy, 2005, 219(A7): 525–53210.1243/095765005X31108 ↗
9. Oh H W, Yoon E S, Park S J. Hydraulic performance analysis of an axial-flow main coolant pump for the system-integrated nuclear reactor. Proc Instn Mech Engrs, Part A: J Power Energy, 2006, 220(A6): 635–64010.1243/09576509JPE258 ↗
10. Oh H W, Yoon E S. Application of computational fluid dynamics to performance analysis of a Francis hydraulic turbine. Proc Instn Mech Engrs, Part A: J Power Energy, 2007, 221(A4): 583–59010.1243/09576509JPE399 ↗
11. Bonaiuti D, Zangeneh M, Aartojarvi R, et al. Parametric design of a waterjet pump by means of inverse design, CFD calculations and experimental analyses. ASME J Fluids Eng, 2010, 132(3): 031104-1–031104-1510.1115/1.4001005 ↗
12. Kim J H, Ahn H J, Kim K Y. High-efficiency design of a mixed-flow pump. Sci China Tech Sci, 2010, 53(1): 24–2710.1007/s11431-009-0424-6 ↗
13. Oh H W. Design parameter to improve the suction performance of mixed-flow pump impeller. Proc Instn Mech Engrs, Part A: J Power Energy, 2010, 224(A6): 881–88710.1243/09576509JPE986 ↗
14. Bing H, Cao S L, Tan L. Iteration method of direct inverse problem of mixed-flow pump impeller design (in Chinese). J Drain Irrig Mach Eng, 2011, 29(4): 277–281
15. Bing H, Cao S L, Tan L, et al. Parameterization of velocity moment distribution and its effects on performance of mixed-flow pump (in Chinese). Trans CSAE, 2012, 28(13): 100–105
16. Bing H, Cao S L, Lu L. Analysis of key parameters for mixed-flow pump impeller design (in Chinese). J Hydroelectr Eng, 2013, 32(3): 229–233
17. Bing H, Cao S L, Tan L, et al. Effects of meridional flow passage shape on hydraulic performance of mixed-flow pump impellers. Chin J Mech Eng, 2013, 26(3): 469–47510.3901/CJME.2013.03.469 ↗
18. Bing H, Cao S L, Tan L, et al. Effects of diffuser vane on mixed-flow pumps performance (in Chinese). J Drain Irrig Mach Eng, 2012, 30(2): 125–130
19. Bing H, Tan L, Cao S L, et al. Prediction method of impeller performance and analysis of loss mechanism for mixed-flow pump. Sci China Tech Sci, 2012, 55(7): 1988–199810.1007/s11431-012-4867-9 ↗
20. Andrej G, Emilie R, Claire M C, et al. Plasmonic near-electric field enhancement effects in ultrafast photoelectron emission: Correlated spatial and laser polarization microscopy Studies of Individual Ag Nanocubes. Nano Lett, 2012, 12(9): 4823–482910.1021/nl302271u ↗
21. Cai Y L, Jiao S, Wang L X, et al. Test research on water-jet mixed-flow pump designed by controllable velocity moment method (in Chinese). Fluid Mach, 2010, 38(9): 1–4
22. Lu J L, Xi G, Qi D T. Optimization method of meridional channel and blade in 3-D impeller (in Chinese). J Xi’an Jiaotong Univ, 2005, 39(9): 1021–1025
23. Jia R X, Xu H. Optimal design of low specific speed mixed-flow pump impeller (in Chinese). J Drain Irrig Mach Eng, 2010, 28(2): 98–102
24. Xie R, Shan Y J, Wang X F. Numerical simulation on flow performance and blade profile optimal design of mixed-flow pump impeller (in Chinese). J Drain Irrig Mach Eng, 2010, 28(4): 295–299
25. Cao S L, Liang L, Zhu B S, et al. Design method for impeller of high specific speed mix-flow pump (in Chinese). J Jiangsu Univ: Natural Science Edition, 2005, 26(3): 185–188
26. Wu C H. A general theory of three-dimensional flow in subsonic and supersonic turbo machines of axial, radial and mixed-flow types. Trans ASME, 1952, 74(8): 1363–1380.
27. Cao S L, Lin R C, Risaburo O. Flow calculation of a mixed-flow runner, especially with respect to a marked effect of the blade loading. JSME Int J, 1991, 34(3): 318–323
28. Zangeneh M. A compressible three dimensional blade design method for radial and mixed flow turbomachinery blades. Int Jr Num Methods Fluids, 1991, 13(5): 599–624.10.1002/fld.1650130505 ↗
29. Cao S L, Peng G Y, Yu Z Y. Hydrodynamic design of rotodynamic pump impeller for multiphase pumping by combined approach of inverse design and CFD analysis. ASME J Fluids Eng, 2005, 127(3): 330–33810.1115/1.1881697 ↗
30. Oh H W, Yoon E S, Chung M K. An optimum set of loss models for performance prediction of centrifugal compressors. Proc Instn Mech. Engrs, Part A: J Power Energy, 1997, 211(A4): 331–33810.1243/0957650971537231 ↗
31. Yoon E S, Oh H W, Chung M K, et al. Performance prediction of mixed-flow pumps. Proc Instn Mech Engrs, Part A: J Power Energy, 1998, 212(A2): 109–11510.1243/0957650981536637 ↗
32. Oh H W, Chung M K. Optimum values of design variables versus specific speed for centrifugal pumps. Proc Instn Mech Engrs, Part A: J Power Energy, 1999, 213(A3): 219–22610.1243/0957650991537563 ↗
33. Ashihara K, Goto A. Turbomachinery blade design using 3-D inverse design method CFD and optimization algorithm. Proceeding of ASME Turbo Expo. New Orleans, USA: ASME, 2001, 2001-GT-0358: 1–9