Experimental and numerical investigations on convective heat transfer of dual piezoelectric fans
Source abstract
Abstract
An investigation is performed to study the convective heat transfer performance under dual piezoelectric fans. Three main aspects are involved in the current study. Firstly, vibration tests for dual specific piezoelectric fans actuating at the first-mode resonant frequency are conducted to illustrate the influence roles of vibrating phase difference and fan-to-fan pitch on the piezoelectric fan vibration amplitude. Secondly, heat transfer measurements are made to compare the heat transfer among single fan, dual fans in-phase and dual fans out-of-phase. Thirdly, three-dimensional numerical simulations are conducted to reveal the influence mechanism of dual piezoelectric fans on heat transfer. The results show that, the vibrating phase difference of dual fans has nearly no influence on the displacement velocity and amplitude of piezoelectric fan related to single fan once the dimensionless pitch (P/W) is beyond 1.2. The dual piezoelectric fans produce nearly the same peak heat transfer coefficient as that of single fan case. Of particular is that the dual fans operating in-phase produce more favorable heat transfer than the dual fans operating out-of-phase, especially in the gap zone between dual fans. Due to the interaction between dual fans, the streaming flow induced by one vibrating fan suffers the action of sweeping flow of another vibrating fan when they operate out-of-phase. While for the dual fans operating in-phase, the streaming flows induced by vibrating fans merge together to form stronger wall jet flow in the region between two fans.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Plasma and Flow Control in Aerodynamics · Fluid Dynamics and Turbulent Flows · Heat Transfer Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Yoo J H, Hong J I, Cao W. Piezoelectric ceramic bimorph coupled to thin metal plate as cooling fan for electronic devices. Sensor Actuat A-Phys, 2000, 79: 8–1210.1016/S0924-4247(99)00249-6 ↗
2. Zhang J Z, Tan X M. Experimental study on flow and heat transfer characteristics of synthetic jet driven by piezoelectric actuator. Sci China Ser E-Tech Sci, 2007, 50: 221–22910.1007/s11431-005-0006-1 ↗
3. Gilson G M, Pickering S J, Hann D B, et al. Piezoelectric fan cooling: A novel high reliability electric machine thermal management solution. IEEE Trans Ind Electron, 2013, 60: 4841–485110.1109/TIE.2012.2224081 ↗
4. Kim Y H, Wereley S T, Chun C H. Phase-resolved flow field produced by a vibrating cantilever plate between two endplates. Phys Fluids, 2004, 16: 145–16210.1063/1.1630796 ↗
5. Kimber M, Suzuki K, Kitsunai N, et al. Pressure and flow rate performance of piezoelectric fans. IEEE Trans Comp Packag Technol, 2009, 32: 766–77510.1109/TCAPT.2008.2012169 ↗
6. Kim Y H, Cierpka C, Wereley S T. Flow field around a vibrating cantilever: coherent structure eduction by continuous wavelet transform and proper orthogonal decomposition. J Fluid Mech, 2011, 669: 584–60610.1017/S0022112010005318 ↗
7. Choi M, Cierpka C, Kim Y H. Vortex formation by a vibrating cantilever. J Fluids Struct, 2012, 31: 67–7810.1016/j.jfluidstructs.2012.03.004 ↗
8. Açikalin T, Garimella S V, Raman A, et al. Characterization and optimization of the thermal performance of miniature piezoelectric fans. Int J Heat Fluid Flow, 2007, 28: 806–82010.1016/j.ijheatfluidflow.2006.10.003 ↗
9. Liu S F, Huang R T, Sheu W J, et al. Heat transfer by a piezoelectric fan on a flat surface subject to the influence of horizontal/vertical arrangement. Int J Heat Mass Transfer, 2009, 52: 2565–257010.1016/j.ijheatmasstransfer.2009.01.013 ↗
10. Kimber M, Garimella S V, Raman A. Local heat transfer coefficients induced by piezoelectrically actuated vibrating cantilevers. J Heat Transfer, 2007, 129: 1168–117610.1115/1.2740655 ↗
11. Abdullah M K, Abdullah M Z, Ramana M V, et al. Numerical and experimental investigations on effect of fan height on the performance of piezoelectric fan in microelectronic cooling. Int Commun Heat Mass Transfer, 2009, 36: 51–5810.1016/j.icheatmasstransfer.2008.08.017 ↗
12. Lin C N. Analysis of three-dimensional heat and fluid flow induced by piezoelectric fan. Int J Heat Mass Transfer, 2012, 55: 3043–305310.1016/j.ijheatmasstransfer.2012.02.017 ↗
13. Tan L, Zhang J Z, Tan X M. Numerical investigation of convective heat transfer on a vertical surface due to resonating cantilever beam. Int J Thermal Sci, 2014, 80: 93–10710.1016/j.ijthermalsci.2014.02.004 ↗
14. Fairuz Z M, Sufian S F, Abdullah M Z, et al. Effect of piezoelectric fan mode shape on the heat transfer characteristics. Int Commun Heat Mass Transfer, 2014, 52: 140–15110.1016/j.icheatmasstransfer.2013.11.013 ↗
15. Li X J, Zhang J Z, Tan X M. Investigation on heat transfer characteristics under a single piezoelectric fan (in chinese). Acta Aeronaut et Astronaut Sinica, 2017, 38: 120982
16. Kimber M, Lonergan R, Garimella S V. Experimental study of aerodynamic damping in arrays of vibrating cantilevers. J Fluids Struct, 2009, 25: 1334–134710.1016/j.jfluidstructs.2009.07.003 ↗
17. Choi M, Lee S Y, Kim Y H. On the flow around a vibrating cantilever pair with different phase angles. Eur J Mech-B/Fluids, 2012, 34: 146–15710.1016/j.euromechflu.2012.01.021 ↗
18. Choi M, Cierpka C, Kim Y H. Effects of the distance between a vibrating cantilever pair. Eur J Mech-B/Fluids, 2014, 43: 154–16510.1016/j.euromechflu.2013.08.006 ↗
19. Sufian S F, Abdullah M Z, Mohamed J J. Effect of synchronized piezoelectric fans on microelectronic cooling performance. Int Commun Heat Mass Transfer, 2013, 43: 81–8910.1016/j.icheatmasstransfer.2013.02.013 ↗
20. Ma S L, Chen J W, Li H Y, et al. Mechanism of enhancement of heat transfer for plate-fin heat sinks with dual piezoelectric fans. Int J Heat Mass Transfer, 2015, 90: 454–46510.1016/j.ijheatmasstransfer.2015.03.050 ↗
21. Li H Y, Wu Y X. Heat transfer characteristics of pin-fin heat sinks cooled by dual piezoelectric fans. Int J Thermal Sci, 2016, 110: 26–3510.1016/j.ijthermalsci.2016.06.030 ↗
22. Yao Y, Zhang J Z. Investigation on film cooling characteristics from a row of converging slot-holes on flat plate. Sci China Tech Sci, 2011, 54: 1793–180010.1007/s11431-011-4378-0 ↗
23. Gao S, Zhang J Z, Tan X M. Experimental study on heat transfer characteristics of synthetic jet driven by piston actuator. Sci China Tech Sci, 2012, 55: 1732–173810.1007/s11431-012-4769-x ↗
24. Shao W, Cui Z, Wang N H, et al. Numerical simulation of heat transfer process in cement grate cooler based on dynamic mesh technique. Sci China Tech Sci, 2016, 59: 1065–107010.1007/s11431-016-6074-6 ↗
25. Jeong J, Hussain F. On the identification of a vortex. J Fluid Mech, 1995, 285: 69–9410.1017/S0022112095000462 ↗