journal article·2018-10

Progress review of US-China joint research on advanced technologies for plug-in electric vehicles

MingGao Ouyang, JiuYu Du, Huei Peng, HeWu Wang, XuNing Feng, ZiYou Song

Publisher page

Abstract

The United States and China are the world’s largest automobile markets and oil consumers, and both face a severe challenge to conserve energy and reduce tailpipe emissions. Thus, both countries urgently need to transform conventional internal combustion engines to electrified powertrains. Targeting the advanced core technologies of plug-in electric vehicles (PEVs), a joint research collaboration between China and the US, called the “Clean Vehicle Consortium” (CVC), was set up in 2010. Six years of collaboration on PEV technologies has resulted in significant progress in three technical areas. Based on CVC publications, we review herein the progress made by the CVC research efforts on three key advanced PEV technologies. This includes the development of a safe battery with an energy density of 260 W h kg−1 and a systematic method for designing safe traction battery systems. Thus, a breakthrough in high power density and efficient traction motor systems has occurred. In addition to discussing advanced electric-drive powertrains, we also discuss global energy management strategies that aim to improve PEV energy efficiency. This discussion covers scientific and comprehensive analysis methods to analyze energy systems, which include cost-benefit analyses of plug-in hybrid electric vehicles, life-cycle assessments for evaluating vehicle emissions, and PEV-ownership projections.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Electric Vehicles and Infrastructure · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (99)

Show source-provided references
1. Gallant B M, Kwabi D G, Mitchell R R, et al. Influence of Li2O2 morphology on oxygen reduction and evolution kinetics in Li-O2 batteries. Energ Environ Sci, 2013, 6: 251810.1039/c3ee40998h ↗
2. Kang S Y, Mo Y, Ong S P, et al. A facile mechanism for recharging Li2O2 in Li-O2 batteries. Chem Mater, 2013, 25: 3328–333610.1021/cm401720n ↗
3. Kang S Y, Mo Y, Ong S P, et al. Nanoscale stabilization of sodium oxides: Implications for Na-O2 batteries. Nano Lett, 2014, 14: 1016–102010.1021/nl404557w ↗
4. Akbar Ali M, Violi A. Reaction pathways for the thermal decomposition of methyl butanoate. J Org Chem, 2013, 78: 5898–590810.1021/jo400569d ↗
5. Akbar Ali M, Dillstrom V T, Lai J Y W, et al. Ab initio investigation of the thermal decomposition of n-butylcyclohexane. J Phys Chem A, 2014, 118: 1067–107610.1021/jp4062384 ↗
6. Erickson E M, Schipper F, Penki T R, et al. Review—Recent advances and remaining challenges for lithium ion battery cathodes: II. lithiumrich, xLi2MnO3·(1−x)LiNiaCobMncO2. J Electrochem Soc, 2017, 164: A6341–A634810.1149/2.0461701jes ↗
7. Lin J, Mu D, Jin Y, et al. Li-rich layered composite Li[Li0.2Ni0.2Mn0.6] O2 synthesized by a novel approach as cathode material for lithium ion battery. J Power Sources, 2013, 230: 76–8010.1016/j.jpowsour.2012.12.042 ↗
8. Zhang L, Wu B, Li N, et al. Rod-like hierarchical nano/micro Li1.2 Ni0.2Mn0.6O2 as high performance cathode materials for lithium-ion batteries. J Power Sources, 2013, 240: 644–65210.1016/j.jpowsour.2013.05.019 ↗
9. Zhang L, Borong W, Ning L, et al. Hierarchically porous micro-rod lithium-rich cathode material Li1.2Ni0.13Mn0.54Co0.13O2 for high performance lithium-ion batteries. Electrochim Acta, 2014, 118: 67–7410.1016/j.electacta.2013.11.186 ↗
10. Feng X, Ouyang M, Liu X, et al. Thermal runaway mechanism of lithium ion battery for electric vehicles: A review. Energ Storage Mater, 2018, 10: 246–26710.1016/j.ensm.2017.05.013 ↗
11. Zhang S, Zhou Q, Xia Y. Influence of mass distribution of battery and occupant on crash response of small lightweight electric vehicle. SAE Technical Paper, 2015
12. Jiang X, Luo H, Xia Y, et al. Mechanical behavior of lithium-ion battery component materials and error sources analysis for test results. SAE Int J Mater Manf, 2016, 9: 2016-01-040010.4271/2016-01-0400 ↗
13. Ouyang M, Ren D, Lu L, et al. Overcharge-induced capacity fading analysis for large format lithium-ion batteries with LiyNi1/3Co1/3Mn1/3O2+LiyMn2O4 composite cathode. J Power Sources, 2015, 279: 626–63510.1016/j.jpowsour.2015.01.051 ↗
14. Ren D, Feng X, Lu L, et al. An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery. J Power Sources, 2017, 364: 328–34010.1016/j.jpowsour.2017.08.035 ↗
15. Guo R, Lu L, Ouyang M, et al. Mechanism of the entire overdischarge process and overdischarge-induced internal short circuit in lithium-ion batteries. Sci Rep, 2016, 6: 3024810.1038/srep30248 ↗
16. Liu L, He X, Lu L, et al. Evaluation of triggering approaches of internal short circuit in lithium ion batteries. In: The 231st ECS Meeting. New Orleans, 2017
17. Feng X, Weng C, Ouyang M, et al. Online internal short circuit detection for a large format lithium ion battery. Appl Energ, 2016, 161: 168–18010.1016/j.apenergy.2015.10.019 ↗
18. Feng X, Fang M, He X, et al. Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry. J Power Sources, 2014, 255: 294–30110.1016/j.jpowsour.2014.01.005 ↗
19. Feng X, Sun J, Ouyang M, et al. Characterization of large format lithium ion battery exposed to extremely high temperature. J Power Sources, 2014, 272: 457–46710.1016/j.jpowsour.2014.08.094 ↗
20. Feng X, He X, Ouyang M, et al. Thermal runaway propagation model for designing a safer battery pack with 25 Ah LiNixCoyMnzO2 large format lithium ion battery. Appl Energ, 2015, 154: 74–9110.1016/j.apenergy.2015.04.118 ↗
21. Feng X, Sun J, Ouyang M, et al. Characterization of penetration induced thermal runaway propagation process within a large format lithium ion battery module. J Power Sources, 2015, 275: 261–27310.1016/j.jpowsour.2014.11.017 ↗
22. Feng X, Lu L, Ouyang M, et al. A 3D thermal runaway propagation model for a large format lithium ion battery module. Energy, 2016, 115: 194–20810.1016/j.energy.2016.08.094 ↗
23. Lu L, Han X, Li J, et al. A review on the key issues for lithium-ion battery management in electric vehicles. J Power Sources, 2013, 226: 272–28810.1016/j.jpowsour.2012.10.060 ↗
24. Han X, Ouyang M, Lu L, et al. Simplification of physics-based electrochemical model for lithium ion battery on electric vehicle. Part I: Diffusion simplification and single particle model. J Power Sources, 2015, 278: 802–813
25. Han X, Ouyang M, Lu L, et al. Simplification of physics-based electrochemical model for lithium ion battery on electric vehicle. Part II: Pseudo-two-dimensional model simplification and state of charge estimation. J Power Sources, 2015, 278: 814–825
26. Ouyang M, Chu Z, Lu L, et al. Low temperature aging mechanism identification and lithium deposition in a large format lithium iron phosphate battery for different charge profiles. J Power Sources, 2015, 286: 309–32010.1016/j.jpowsour.2015.03.178 ↗
27. Chu Z, Feng X, Lu L, et al. Non-destructive fast charging algorithm of lithium-ion batteries based on the control-oriented electrochemical model. Appl Energ, 2017, 204: 1240–125010.1016/j.apenergy.2017.03.111 ↗
28. Han X, Ouyang M, Lu L, et al. A comparative study of commercial lithium ion battery cycle life in electrical vehicle: Aging mechanism identification. J Power Sources, 2014, 251: 38–5410.1016/j.jpowsour.2013.11.029 ↗
29. Han X, Ouyang M, Lu L, et al. A comparative study of commercial lithium ion battery cycle life in electric vehicle: Capacity loss estimation. J Power Sources, 2014, 268: 658–66910.1016/j.jpowsour.2014.06.111 ↗
30. Feng X, Li J, Ouyang M, et al. Using probability density function to evaluate the state of health of lithium-ion batteries. J Power Sources, 2013, 232: 209–21810.1016/j.jpowsour.2013.01.018 ↗
31. Weng C, Cui Y, Sun J, et al. On-board state of health monitoring of lithium-ion batteries using incremental capacity analysis with support vector regression. J Power Sources, 2013, 235: 36–4410.1016/j.jpowsour.2013.02.012 ↗
32. Weng C, Sun J, Peng H. Model parametrization and adaptation based on the invariance of support vectors with applications to battery stateof-health monitoring. IEEE Trans Veh Technol, 2015, 64: 3908–391710.1109/TVT.2014.2364554 ↗
33. Weng C, Feng X, Sun J, et al. State-of-health monitoring of lithiumion battery modules and packs via incremental capacity peak tracking. Appl Energ, 2016, 180: 360–36810.1016/j.apenergy.2016.07.126 ↗
34. Cordoba-Arenas A, Onori S, Rizzoni G, et al. Aging propagation in interconnected systems with an application to advanced automotive battery packs. In: 7th IFAC Symposium on Advances in Automotive Control. Tokyo, 2013
35. Cordoba-Arenas A, Onori S, Rizzoni G. A control-oriented lithiumion battery pack model for plug-in hybrid electric vehicle cycle-life studies and system design with consideration of health management. J Power Sources, 2015, 279: 791–80810.1016/j.jpowsour.2014.12.048 ↗
36. Ouyang M, Feng X, Han X, et al. A dynamic capacity degradation model and its applications considering varying load for a large format Li-ion battery. Appl Energ, 2016, 165: 48–5910.1016/j.apenergy.2015.12.063 ↗
37. Zheng Y, Ouyang M, Lu L, et al. Understanding aging mechanisms in lithium-ion battery packs: From cell capacity loss to pack capacity evolution. J Power Sources, 2015, 278: 287–29510.1016/j.jpowsour.2014.12.105 ↗
38. Ouyang M, Gao S, Lu L, et al. Determination of the battery pack capacity considering the estimation error using a Capacity-Quantity diagram. Appl Energ, 2016, 177: 384–39210.1016/j.apenergy.2016.05.137 ↗
39. Zheng Y, Lu L, Han X, et al. LiFePO4 battery pack capacity estimation for electric vehicles based on charging cell voltage curve transformation. J Power Sources, 2013, 226: 33–4110.1016/j.jpowsour.2012.10.057 ↗
40. Zheng Y, Ouyang M, Lu L, et al. On-line equalization for lithium-ion battery packs based on charging cell voltages: Part 1. Equalization based on remaining charging capacity estimation. J Power Sources, 2014, 247: 676–686
41. Zheng Y, Ouyang M, Lu L, et al. On-line equalization for lithium-ion battery packs based on charging cell voltages: Part 2. Fuzzy logic equalization. J Power Sources, 2014, 247: 460–46610.1016/j.jpowsour.2013.09.012 ↗
42. Hua Y, Cordoba-Arenas A, Warner N, et al. A multi time-scale stateof-charge and state-of-health estimation framework using nonlinear predictive filter for lithium-ion battery pack with passive balance control. J Power Sources, 2015, 280: 293–31210.1016/j.jpowsour.2015.01.112 ↗
43. Cordoba-Arenas A, Zhang J, Rizzoni G. Diagnostics and prognostics needs and requirements for electrified vehicles powertrains. IFAC Proc Volumes, 2013, 46: 524–52910.3182/20130904-4-JP-2042.00139 ↗
44. Zheng Y, Han X, Lu L, et al. Lithium ion battery pack power fade fault identification based on Shannon entropy in electric vehicles. J Power Sources, 2013, 223: 136–14610.1016/j.jpowsour.2012.09.015 ↗
45. Ouyang M, Zhang M, Feng X, et al. Internal short circuit detection for battery pack using equivalent parameter and consistency method. J Power Sources, 2015, 294: 272–28310.1016/j.jpowsour.2015.06.087 ↗
46. Cai Y, Ouyang M G, Yang F. Impact of power split configurations on fuel consumption and battery degradation in plug-in hybrid electric city buses. Appl Energ, 2017, 188: 257–26910.1016/j.apenergy.2016.11.126 ↗
47. Ouyang M, Zhang W, Wang E, et al. Performance analysis of a novel coaxial power-split hybrid powertrain using a CNG engine and supercapacitors. Appl Energ, 2015, 157: 595–60610.1016/j.apenergy.2014.12.086 ↗
48. Wang E, Guo D, Yang F. System design and energetic characterization of a four-wheel-driven series-parallel hybrid electric powertrain for heavy-duty applications. Energ Conv Manage, 2015, 106: 1264–127510.1016/j.enconman.2015.10.056 ↗
49. Cai Y, Ouyang M, Yang F. Energy management and design optimization for a series-parallel PHEV city bus. Int J Automot Technol, 2017, 18: 473–48710.1007/s12239-017-0047-z ↗
50. Hu Y, Yang F, Ouyang M. Fuel consumption analysis and optimizing of a heavy duty dual motor coaxial series-parallel hybrid lorry under C-WTVC. SAE Technical Paper, 2017
51. Gao G J, Yang F Y, Chen L et al. Transient control of low-temperature premixed combustion using ISG motor dynamic torque compensation. In: IEEE Vehicle Power and Propulsion Conference VPPC. New York, 2012. 846–850
52. Yang F, Gao G, Ouyang M, et al. Research on a diesel HCCI engine assisted by an ISG motor. Appl Energ, 2013, 101: 718–72910.1016/j.apenergy.2012.07.037 ↗
53. Zhang Y, Hou Z, Yang F, et al. Failure mechanism of the transmission shaft of a new power split hybrid vehicle. In: Vehicle Symposium and Exhibition (EVS27). Barcelona, 201310.1109/EVS.2013.6915003 ↗
54. Zhang J, Hu Y, Yang F, et al. Simulations on special structure ISG motor used for hybrid electrical vehicles aimed at active damping. SAE Technical Paper, 2017
55. Wang L, Zhang Y, Yin C, et al. Hardware-in-the-loop simulation for the design and verification of the control system of a series-parallel hybrid electric city-bus. Simul Model Practice Theor, 2012, 25: 148–16210.1016/j.simpat.2012.02.010 ↗
56. Du L, Yang F, Xu L, et al. Research on TITO coupling control strategy for parallel hybrid excavator. In: ASME Internal Combustion Engine Fall Technical Conference. Dearborn, 201310.1115/ICEF2013-19038 ↗
57. Jie S, Yong Z, Chengliang Y. Longitudinal brake control of hybrid electric bus using adaptive fuzzy sliding mode control. Int J Model Indet Control, 2012, 15: 147–15510.1504/IJMIC.2012.045687 ↗
58. Zhu F, Chen L, Yin C, et al. Dynamic modelling and systematic control during the mode transition for a multi-mode hybrid electric vehicle. P I Mech Eng D-J Aut, 2013, 227: 1007–102310.1177/0954407013477027 ↗
59. Zhu F, Chen L, Yin C. Design and analysis of a novel multimode transmission for a HEV using a single electric machine. IEEE Trans Veh Technol, 2013, 62: 1097–111010.1109/TVT.2012.2222456 ↗
60. Chen L, Zhu F, Zhang M, et al. Design and analysis of an electrical variable transmission for a series-parallel hybrid electric vehicle. IEEE Trans Veh Technol, 2011, 60: 2354–236310.1109/TVT.2011.2134876 ↗
61. Zhang H, Zhang Y, Yin C. Hardware-in-the-loop simulation of robust mode transition control for a series-parallel hybrid electric vehicle. IEEE Trans Veh Technol, 2016, 65: 1059–106910.1109/TVT.2015.2486558 ↗
62. Cai Y, Yang F, Ouyang M. Impact of control strategy on battery degradation for a plug-in hybrid electric city bus in China. Energy, 2016, 116: 1020–103010.1016/j.energy.2016.09.137 ↗
63. Zhang X, Mi C C, Yin C. Active-charging based powertrain control in series hybrid electric vehicles for efficiency improvement and battery lifetime extension. J Power Sources, 2014, 245: 292–30010.1016/j.jpowsour.2013.06.117 ↗
64. Du J, Yang F, Cai Y, et al. Testing and analysis of the control strategy of Honda Accord plug-in HEV. IFAC-Papersonline, 2016, 49: 153–15910.1016/j.ifacol.2016.08.024 ↗
65. Jungst R G, Nagasubramanian G, Case H L, et al. Accelerated calendar and pulse life analysis of lithium-ion cells. J Power Sources, 2003, 119–121: 870–873
66. Song Z, Hofmann H, Li J, et al. Optimization for a hybrid energy storage system in electric vehicles using dynamic programing approach. Appl Energ, 2015, 139: 151–16210.1016/j.apenergy.2014.11.020 ↗
67. Song Z, Li J, Han X, et al. Multi-objective optimization of a semiactive battery/supercapacitor energy storage system for electric vehicles. Appl Energ, 2014, 135: 212–22410.1016/j.apenergy.2014.06.087 ↗
68. Song Z, Hofmann H, Li J, et al. Energy management strategies comparison for electric vehicles with hybrid energy storage system. Appl Energ, 2014, 134: 321–33110.1016/j.apenergy.2014.08.035 ↗
69. Song Z, Hofmann H, Li J, et al. A comparison study of different semiactive hybrid energy storage system topologies for electric vehicles. J Power Sources, 2015, 274: 400–41110.1016/j.jpowsour.2014.10.061 ↗
70. Song Z, Hou J, Xu S, et al. The influence of driving cycle characteristics on the integrated optimization of hybrid energy storage system for electric city buses. Energy, 2017, 135: 91–10010.1016/j.energy.2017.06.096 ↗
71. Ji Y, Wang C Y. Heating strategies for Li-ion batteries operated from subzero temperatures. Electrochim Acta, 2013, 107: 664–67410.1016/j.electacta.2013.03.147 ↗
72. Song Z, Hofmann H, Li J, et al. The optimization of a hybrid energy storage system at subzero temperatures: Energy management strategy design and battery heating requirement analysis. Appl Energ, 2015, 159: 576–58810.1016/j.apenergy.2015.08.120 ↗
73. Jung H, Wang H, Hu T. Control design for robust tracking and smooth transition in power systems with battery/supercapacitor hybrid energy storage devices. J Power Sources, 2014, 267: 566–57510.1016/j.jpowsour.2014.05.061 ↗
74. Song Z, Hou J, Hofmann H, et al. Sliding-mode and Lyapunov function-based control for battery/supercapacitor hybrid energy storage system used in electric vehicles. Energy, 2017, 122: 601–61210.1016/j.energy.2017.01.098 ↗
75. Caruntu C F, Lazar M, Gielen R H, et al. Lyapunov based predictive control of vehicle drivetrains over CAN. Control Eng Practice, 2013, 21: 1884–189810.1016/j.conengprac.2012.05.012 ↗
76. Shuai Z, Zhang H, Wang J, et al. Combined AFS and DYC control of four-wheel-independent-drive electric vehicles over CAN network with time-varying delays. IEEE Trans Veh Technol, 2014, 63: 591–60210.1109/TVT.2013.2279843 ↗
77. Shuai Z, Zhang H, Wang J, et al. Lateral motion control for fourwheel-independent-drive electric vehicles using optimal torque allocation and dynamic message priority scheduling. Control Eng Pract, 2014, 24: 55–6610.1016/j.conengprac.2013.11.012 ↗
78. Shuai Z, Zhang H, Wang J, et al. Network control of vehicle lateral dynamics with control allocation and dynamic message priority assignment. In: Asme 2013 Dynamic Systems And Control Conference, 201310.1115/DSCC2013-3890 ↗
79. Song Z, Li J, Wei Y, et al. Interaction of In-wheel permanent magnet synchronous motor with tire dynamics. Chin J Mech Eng, 2015, 28: 470–47810.3901/CJME.2015.0318.033 ↗
80. Li J, Song Z, Wei Y, et al. Influence of tire dynamics on slip ratio estimation of independent driving wheel system. Chin J Mech Eng, 2014, 27: 1203–121010.3901/CJME.2014.0912.150 ↗
81. Song Z, Li J, Shuai Z, et al. Fuzzy logic torque control system in fourwheel-drive electric vehicles for active damping vibration control. Int J Vehicle Des, 2015, 68: 55–8010.1504/IJVD.2015.071068 ↗
82. Yin D Y, Oh S, Hori Y. A novel traction control for EV based on maximum transmissible torque estimation. IEEE Trans Ind Electron, 2009, 56: 2086–209410.1109/TIE.2009.2016507 ↗
83. Song Z, Li J, Xu L, et al. Traction control system for EV based on modified maximum transmissible torque estimation. In: IEEE Vehicle Power and Propulsion Conference. 2013. 384–390
84. Li J, Song Z, Shuai Z, et al. Wheel slip control using sliding-mode technique and maximum transmissible torque estimation. J Dyn Sys Meas Control, 2015, 137: 11101010.1115/1.4031056 ↗
85. Li P, Yang Y, Ge Z, et al. Analysis and calculation on energy consumption of 300 MW CHP heating systems. In: Proceedings of the Chinese Society for Electrical Engineering, 2012. 15–20
86. Yang C Y, Yang Z P, Yang Y P, et al. Unit consumption analysis in 600 MW coal fired power plant. J North China Electric Power University, 2010, 216: 845-850
87. Yang Z P Yang Y P. Energy consumption and distribution of 1000 MW coal-fired power generating unit. J North China Elect Power Univ, 2012, 39: 76–80
88. Yang Z P, Wang N L, Yang Y P. Energy consumption spatial temporal distribution characteristics of large thermal power generating units. J North China Electric Power Univ, 2014, 41: 84–89
89. Yang Y, Yang Z, Xu G, et al. Situation and prospect of energy consumption for China’s thermal power generation. In: Proceedings of the Chinese Society for Electrical Engineering, 2013. 1–11
90. Hu Y, Xu G, Duan W, et al. Current situation and performance comparison of carbon capture technologies. Thermal Power Generation, 2017, 46: 1–6, 14
91. China Electricity Council. China Clean Coal Power Development Report. 2017
92. Hou C, Wang H, Ouyang M. Survey of daily vehicle travel distance and impact factors in Beijing. IFAC Proc Volumes, 2013, 46: 35–4010.3182/20130904-4-JP-2042.00002 ↗
93. Wang H, Wu L, Hou C, et al. A GPS-based research on driving range and patterns of private passenger vehicle in Beijing. In: Electric Vehicle Symposium and Exhibition (EVS27). Barcelona, 201310.1109/EVS.2013.6914985 ↗
94. Zhang X B, Wang H W. Utility factors derived from Beijing passenger car travel survey. In: The FISITA 2014 world automotive congress. Maastricht, 2014
95. Xu H. Electric distance ratio of PHEV in China mega city—Based on mass driving and charging data. In: FISITA. Busan. 2016
96. Hou C, Wang H, Ouyang M. Battery sizing for plug-in hybrid electric vehicles in Beijing: A TCO model based analysis. Energies, 2014, 7: 5374–539910.3390/en7085374 ↗
97. Du J, Wang H, Ouyang M. Parameters optimization of PHEV based on cost-effectiveness from life cycle view in China. In: Proceedings of the FISITA 2012 World Automotive Congress. Heidelberg, 2013. 697–70410.1007/978-3-642-33777-2_58 ↗
98. Wang H, Zhang X, Wu L, et al. Beijing passenger car travel survey: Implications for alternative fuel vehicle deployment. Mitig Adapt Strateg Glob Change, 2015, 20: 817–83510.1007/s11027-014-9609-9 ↗
99. Wang H W, Zhang X B, Ouyang M G. Energy and environmental lifecycle assessment of passenger car electrification based on Beijing driving patterns. Sci China Tech Sci, 2015, 58: 659–66810.1007/s11431-015-5786-3 ↗