journal article·2022-09

Laser projection proximity transfer for deterministic assembly of microchip arrays at scale

JinLong Hu, FuRong Chen, Jing Bian, NingNing Sun, KaiXin Wang, Hong Ling, HaiYang Yu, MengXin Gai, LiZhi Xu, YongAn Huang

Publisher page

Abstract

Deterministic assembly techniques that enable programmatic and massively parallel integration of chips are essential for the development of novel electronic systems such as microLED displays. However, large-area integration of ultrathin micro-chips with high yield and transfer accuracy remains a great challenge due to the difficulties in selective transfer, adhesion switchability, and transfer deviation. Here, a “laser projection proximity transfer (LaserPPT)” technique is presented for the deterministic assembly of microchip arrays at scale. One of the remarkable features is that the transfer status between the chip and the receiver substrate evolves from the original non-contact mode to contact mode for high-precision transfer, which overcomes the strict requirements of the flatness of stamp and substrate in contact-style transfer, and flight deviation of microchip array in non-contact-style transfer. Another feature is the rapid modulation of interfacial adhesion for reliable transfer via the use of thermally expandable microspheres to form microstructures and combining with a laser-induced blister. The adhesion regulation range is over 20 times without any damage to chip arrays. The results show that the transfer accuracy has been improved substantially with a minimum relative error of ∼0.5%. Combined with a laser beam projection system, demonstrations of LaserPPT for selective assembly of fragile objects onto challenging non-adhesive/cured surfaces in batch illustrate its potential in the high-precision integration of microscale chips at scale.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adhesion, Friction, and Surface Interactions · Semiconductor Lasers and Optical Devices · Interactive and Immersive Displays

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Meitl M A, Zhu Z T, Kumar V, et al. Transfer printing by kinetic control of adhesion to an elastomeric stamp. Nat Mater, 2006, 5: 33–3810.1038/nmat1532 ↗
2. Luo A, Turner K T. Mechanics of crack path selection in microtransfer printing: Challenges and opportunities for process control. J Mech Phys Solids, 2020, 143: 10406610.1016/j.jmps.2020.104066 ↗
3. Linghu C, Zhang S, Wang C, et al. Universal smp gripper with massive and selective capabilities for multiscaled, arbitrarily shaped objects. Sci Adv, 2020, 6: eaay512010.1126/sciadv.aay5120 ↗
4. Xue Y, Zhang Y, Feng X, et al. A theoretical model of reversible adhesion in shape memory surface relief structures and its application in transfer printing. J Mech Phys Solids, 2015, 77: 27–4210.1016/j.jmps.2015.01.001 ↗
5. Carlson A, Bowen A M, Huang Y, et al. Transfer printing techniques for materials assembly and micro/nanodevice fabrication. Adv Mater, 2012, 24: 5284–531810.1002/adma.201201386 ↗
6. Linghu C, Zhang S, Wang C, et al. Transfer printing techniques for flexible and stretchable inorganic electronics. npj Flex Electron, 2018, 2: 1–410.1038/s41528-018-0037-x ↗
7. Ko H C, Shin G, Wang S, et al. Curvilinear electronics formed using silicon membrane circuits and elastomeric transfer elements. Small, 2009, 5: 2703–270910.1002/smll.200900934 ↗
8. Huang Y A, Wu H, Xiao L, et al. Assembly and applications of 3D conformal electronics on curvilinear surfaces. Mater Horiz, 2019, 6: 642–68310.1039/C8MH01450G ↗
9. Zhang W, Zhang L, Liao Y, et al. Conformal manufacturing of soft deformable sensors on the curved surface. Int J Extrem Manuf, 2021, 3: 04200110.1088/2631-7990/ac1158 ↗
10. Kim R H, Kim D H, Xiao J, et al. Waterproof AlInGaP optoelectronics on stretchable substrates with applications in biomedicine and robotics. Nat Mater, 2010, 9: 929–93710.1038/nmat2879 ↗
11. Lee H E, Shin J H, Park J H, et al. Micro light-emitting diodes for display and flexible biomedical applications. Adv Funct Mater, 2019, 29: 180807510.1002/adfm.201808075 ↗
12. WiererJr J J, Tansu N. III-nitride micro-leds for efficient emissive displays. Laser Photon Rev, 2019, 13: 190014110.1002/lpor.201900141 ↗
13. Anwar A R, Sajjad M T, Johar M A, et al. Recent progress in microled-based display technologies. Laser Photon Rev, 2022, 16: 210042710.1002/lpor.202100427 ↗
14. Zhou H, Qin W, Yu Q, et al. Transfer printing and its applications in flexible electronic devices. Nanomaterials, 2019, 9: 28310.3390/nano9020283 ↗
15. Choi M, Jang B, Lee W, et al. Stretchable active matrix inorganic light-emitting diode display enabled by overlay-aligned roll-transfer printing. Adv Funct Mater, 2017, 27: 160600510.1002/adfm.201606005 ↗
16. Yang S Y, Carlson A, Cheng H, et al. Elastomer surfaces with directionally dependent adhesion strength and their use in transfer printing with continuous roll-to-roll applications. Adv Mater, 2012, 24: 2117–212210.1002/adma.201104975 ↗
17. Cheng H, Wu J, Yu Q, et al. An analytical model for shear-enhanced adhesiveless transfer printing. Mech Res Commun, 2012, 43: 46–4910.1016/j.mechrescom.2012.02.011 ↗
18. Carlson A, Wang S, Elvikis P, et al. Active, programmable elastomeric surfaces with tunable adhesion for deterministic assembly by transfer printing. Adv Funct Mater, 2012, 22: 4476–448410.1002/adfm.201201023 ↗
19. Kim S, Wu J, Carlson A, et al. Microstructured elastomeric surfaces with reversible adhesion and examples of their use in deterministic assembly by transfer printing. Proc Natl Acad Sci USA, 2010, 107: 17095–1710010.1073/pnas.1005828107 ↗
20. Huang Y, Zheng N, Cheng Z, et al. Direct laser writing-based programmable transfer printing via bioinspired shape memory reversible adhesive. ACS Appl Mater Interfaces, 2016, 8: 35628–3563310.1021/acsami.6b11696 ↗
21. Seo J, Eisenhaure J, Kim S. Micro-wedge array surface of a shape memory polymer as a reversible dry adhesive. Extreme Mech Lett, 2016, 9: 207–21410.1016/j.eml.2016.07.007 ↗
22. Gomez D, Ghosal K, Moore T, et al. Scalability and yield in elastomer stamp micro-transfer-printing. In: Proceedings of the 2017 IEEE 67th Electronic Components and Technology Conference (ECTC). Orlando, 201710.1109/ECTC.2017.318 ↗
23. Bian J, Zhou L, Wan X, et al. Laser transfer, printing, and assembly techniques for flexible electronics. Adv Electron Mater, 2019, 5: 180090010.1002/aelm.201800900 ↗
24. Marinov V R. Laser-enabled extremely-high rate technology for µLED assembly. SID Symposium Digest of Technical Papers, 2018, 49: 692–69510.1002/sdtp.12352 ↗
25. Shaw-Stewart J, Chu B, Lippert T, et al. Improved laser-induced forward transfer of organic semiconductor thin films by reducing the environmental pressure and controlling the substrate-substrate gap width. Appl Phys A, 2011, 105: 713–72210.1007/s00339-011-6583-x ↗
26. Rapp L, Constantinescu C, Larmande Y, et al. Smart beam shaping for the deposition of solid polymeric material by laser forward transfer. Appl Phys A, 2014, 117: 333–33910.1007/s00339-014-8305-7 ↗
27. Li R, Li Y, Lü C, et al. Thermo-mechanical modeling of laser-driven non-contact transfer printing: Two-dimensional analysis. Soft Matter, 2012, 8: 7122–712710.1039/c2sm25339a ↗
28. Gao Y, Li Y, Li R, et al. An accurate thermomechanical model for laser-driven microtransfer printing. J Appl Mech, 2017, 84: 06450110.1115/1.4036257 ↗
29. Zhang S, Luo H, Wang S, et al. A thermal actuated switchable dry adhesive with high reversibility for transfer printing. Int J Extrem Manuf, 2021, 3: 03510310.1088/2631-7990/abff69 ↗
30. Luo H, Wang C, Linghu C, et al. Laser-driven programmable non-contact transfer printing of objects onto arbitrary receivers via an active elastomeric microstructured stamp. Natl Sci Rev, 2020, 7: 296–30410.1093/nsr/nwz109 ↗
31. Feinaeugle M, Gregorčič P, Heath D J, et al. Time-resolved imaging of flyer dynamics for femtosecond laser-induced backward transfer of solid polymer thin films. Appl Surf Sci, 2017, 396: 1231–123810.1016/j.apsusc.2016.11.120 ↗
32. Fardel R, Nagel M, Nüesch F, et al. Laser-induced forward transfer of organic led building blocks studied by time-resolved shadowgraphy. J Phys Chem C, 2010, 114: 5617–563610.1021/jp907387q ↗
33. Bian J, Chen F, Yang B, et al. Laser-induced interfacial spallation for controllable and versatile delamination of flexible electronics. ACS Appl Mater Interfaces, 2020, 12: 54230–5424010.1021/acsami.0c18951 ↗
34. Bian J, Chen F, Ling H, et al. Experimental and modeling study of controllable laser lift-off via low-fluence multiscanning of polyimide-substrate interface. Int J Heat Mass Transf, 2022, 188: 12260910.1016/j.ijheatmasstransfer.2022.122609 ↗