Thermal performance analysis of non-uniform height rectangular fin based on constructal theory and entransy theory
Source abstract
Abstract
A model of non-uniform height rectangular fin, in which the variation of base’s thickness and width are taken into account, is established in this paper. The dimensionless maximum thermal resistance (DMTR) and the dimensionless equivalent thermal resistance (DETR) defined based on the entransy dissipation rate (EDR) are taken as performance evaluation indexes. According to constructal theory, the variations of the two indexes with the geometric parameters of the fin are analyzed by using a finite-volume computational fluid dynamics code, the effects of the fin-material fraction on the two indexes are analyzed. It is found that the two indexes decrease monotonically as the ratio between the front height and the back height of the fin increases subjected to the non-uniform height rectangular fin. When the model is reduced to the uniform height fin, the two indexes increase first and then decrease with increase in the ratio between the height of the fin and the fin space. The fin-material fraction has no effect on the change rule of the two indexes with the ratio between the height of the fin and the fin space. The sensitivity of the DETR to the geometric parameters of the fin is higher than that of the DMTR to the geometric parameters. The results obtained herein can provide some theoretical support for the thermal design of rectangular fins.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heat Transfer and Optimization · Heat Transfer and Boiling Studies · Heat Transfer Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Garimella S V, Joshi Y K, Bar-Cohen A, et al. Thermal challenges in next generation electronic systems: Summary of panel presentations and discussions. IEEE T Compon Pack T, 2002, 25: 569–57510.1109/TCAPT.2003.809113 ↗
2. Garimella S V, Fleischer A S, Murthy J Y, et al. Thermal challenges in next-generation electronic systems. IEEE T Compon Pack Tech, 2008, 31: 801–81510.1109/TCAPT.2008.2001197 ↗
3. Liu S, Yang J H, Gan Z Y, et al. Structural optimization of a microjet based cooling system for high power LEDs. Int J Therm Sci, 2008, 27: 1086–109510.1016/j.ijthermalsci.2007.09.005 ↗
4. Dirker J, Meyer J P. Topology optimization for an internal heat-conduction cooling scheme in a square domain for high heat flux applications. J Heat Trans-T ASME, 2013, 135: 11101010.1115/1.4024615 ↗
5. Sharma C S, Tiwari M K, Zimmermann S, et al. Energy efficient hotspot-targeted embedded liquid cooling of electronics. Appl Energy, 2015, 138: 414–42210.1016/j.apenergy.2014.10.068 ↗
6. Naphon P, Wiriyasart S, Wongwises S. Thermal cooling enhancement techniques for electronic components. Int Commun Heat Mass, 2015, 61: 140–14510.1016/j.icheatmasstransfer.2014.12.005 ↗
7. Bejan A. Shape and Structure, from Engineering to Nature. Cambridge: Cambridge University Press, 2000
8. Bejan A, Lorente S, Miguel A F, et al. Along with Constructal Theory. Switzerland: University of Lausanne, 2006
9. Bejan A, Lorente S. Design with Constructal Theory. New York: John Wiley & Sons, 200810.1002/9780470432709 ↗
10. Rocha L A O. Convection in Channels and Porous Media: Analysis, Optimization, and Constructal Design. Saarbrücken: VDM Verlag Dr Mueller Aktiengesellschaft & Co. KG, 2009
11. Lorenzini G, Moretti S, Bejan A. Fin Shape Thermal Optimization Using Bejan’s Constructal Theory. Williston: Morgan & Claypool Publishers, 201110.1007/978-3-031-79333-2 ↗
12. Chen L G. Progress in study on constructal theory and its application. Sci China Tech Sci, 2012, 55: 802–82010.1007/s11431-011-4701-9 ↗
13. Bejan A, Zane P J. Design in Nature. New York: Doubleeday, 2012
14. Rocha L A O, Lorente S, Bejan A. Constructal Law and the Unifying Principle of Design. Berlin: Springer, 201310.1007/978-1-4614-5049-8 ↗
15. Bejan A, Lorente S. Constructal law of design and evolution: Physics, biology, technology, and society. J Appl Phys, 2013, 113: 15130110.1063/1.4798429 ↗
16. Bejan A. Constructal law: Optimization as design evolution. J Heat Trans-T ASME, 2015, 137: 6100310.1115/1.4029850 ↗
17. Bejan A. Street network theory of organization in nature. J Adv Transport, 1996, 30: 85–10710.1002/atr.5670300207 ↗
18. Bejan A. Constructal-theory network of conducting paths for cooling a heat generating volume. J Heat Trans-T ASME, 1997, 40: 799–816
19. Alebrahim A, Bejan A. Constructal trees of circular fins for conductive and convective heat transfer. Int J Heat Mass Transf, 1999, 42: 3585–359710.1016/S0017-9310(99)00021-6 ↗
20. Almogbel M, Bejan A. Cylindrical trees of pin fins. Int J Heat Mass Transf, 2000, 43: 4285–429710.1016/S0017-9310(00)00049-1 ↗
21. Xie G N, Song Y, Asadi M, et al. Optimization of pin-fins for a heat exchanger by entropy generation minimization and constructal law. J Heat Trans-T ASME, 2015, 137: 6190110.1115/1.4029851 ↗
22. Bejan A, Almogbel M. Constructal T-shaped fins. Int J Heat Mass Transf, 2000, 43: 2101–211510.1016/S0017-9310(99)00283-5 ↗
23. Lorenzini G, Biserni C, Correa R L, et al. Constructal design of T-shaped assemblies of fins cooling a cylindrical solid body. Int J Therm Sci, 2014, 83: 96–10310.1016/j.ijthermalsci.2014.04.011 ↗
24. Lorenzini G, Rocha L A O. Constructal design of Y-shaped assembly of fins. Int J Heat Mass Transf, 2006, 49: 4552–455710.1016/j.ijheatmasstransfer.2006.05.019 ↗
25. Xie Z H, Chen L G, Sun F R. Constructal optimization of twice level Y-shaped assemblies of fins by taking maximum thermal resistance minimization as objective. Sci China Tech Sci, 2010, 53: 2756–276410.1007/s11431-010-4037-x ↗
26. Lorenzini G, Moretti S. Bejan’s constructal theory and overall performance assessment: The global optimization for heat exchanging finned modules. Therm Sci, 2014, 18: 339–34810.2298/TSCI130211146L ↗
27. Lorenzini G, Rocha L A O. Constructal design of T-Y assembly of fins for an optimized heat removal. Int J Heat Mass Transf, 2009, 52: 1458–146310.1016/j.ijheatmasstransfer.2008.09.007 ↗
28. Lorenzini G, Corrêa R L, Santos E D D, et al. Constructal design of complex assembly of fins. J Heat Trans-T ASME, 2011, 133: 8190210.1115/1.4003710 ↗
29. Guo Z Y, Zhu H Y, Liang X G. Entransy—A physical quantity describing heat transfer ability. Int J Heat Mass Transf, 2007, 50: 2545–255610.1016/j.ijheatmasstransfer.2006.11.034 ↗
30. Guo Z Y, Cheng X G, Xia Z Z. Least dissipation principle of heat transport potential capacity and its application in heat conduction optimization. Chin Sci Bull, 2003, 48: 406–41010.1007/BF03183239 ↗
31. Cheng X T, Liang X G, Xu X H. Microscopic expression of entransy (in Chinese). Acta Phys Sin, 2011, 60: 6051210.7498/aps.60.060512 ↗
32. Cheng X T, Xu X H, Liang X G. Principles of potential entransy in generalized flow (in Chinese). Acta Phys Sin, 2011, 60: 11810310.7498/aps.60.118103 ↗
33. Cheng X T, Dong Y, Liang X G. Potential entransy and potential entransy decrease principle (in Chinese). Acta Phys Sin, 2011, 60: 11440210.7498/aps.60.114402 ↗
34. Feng H J, Chen L G, Xie Z H, et al. Thermal insulation constructal optimization for steel rolling reheating furnace wall based on entransy dissipation extremum principle. Sci China Tech Sci, 2012, 55: 3322–333310.1007/s11431-012-5046-8 ↗
35. Xie Z H. Multi-objective Constructal Optimizations for Three Classes of Heat Transfer Structures (in Chinese). Wuhan: Naval University of Engineering, 2010
36. Feng H J, Chen L G, Xie Z H, et al. Constructal entransy dissipation rate minimization the problem of constracting “disc-point” cooling channels (in Chinese). Acta Phys Sin, 2013, 62: 13470310.7498/aps.62.134703 ↗
37. Chen Q, Wang M, Pan N, et al. Optimization principles for convective heat transfer. Energy, 2009, 34: 1199–120610.1016/j.energy.2009.04.034 ↗
38. Song W M, Meng J A, Li Z X. Optimization of flue gas turbulent heat transfer with condensation in a tube. Chin Sci Bull, 2011, 56: 263–26810.1007/s11434-010-4270-5 ↗
39. Jia H, Liu Z C, Liu W, et al. Convective heat transfer optimization based on minimum entransy dissipation in the circular tube. Int J Heat Mass Transf, 2014, 73: 124–12910.1016/j.ijheatmasstransfer.2014.02.005 ↗
40. Liu X B, Wang M, Meng J A, et al. Minimum entransy dissipation principle for the optimization of transport networks. Int J Nonlin Sci Num, 2010, 11: 113–120
41. Xia S J, Chen L G, Sun F R. Entransy dissipation minimization for one-way isothermal mass transfer processes with a generalized mass transfer law. Sci Iran Chem Chem Eng, 2012, 19: 1616–1625
42. Xia S J, Chen L G, Sun F R. Entransy dissipation minimization for liquid-solid phase change processes. Sci China Tech Sci, 2010, 53: 960–96810.1007/s11431-009-0382-z ↗
43. Wang H R, Wu H Y. Application of minimum thermal resistance principle in optimization for melting process with multiple PCMs (in Chinese). Chin Sci Bull, 2015, 60: 3377–338510.1360/N972014-01319 ↗
44. Xu M T, Cheng L, Guo J F. An application of entransy dissipation theory to heat exchanger design (in Chinese). J Engng Thermophys, 2009, 30: 2090–2092
45. Li X F, Guo J F, Xu M T, et al. Entransy dissipation minimization for optimization of heat exchanger design. Chin Sci Bull, 2011, 56: 2174–217810.1007/s11434-011-4489-9 ↗
46. Guo J F, Xu M T. The application of entransy dissipation theory in optimization design of heat exchanger. Appl Therm Eng, 2012, 36: 227235
47. Xia S J, Chen L G, Ge Y L, et al. Influence of heat leakage on entransy dissipation minimization of heat exchanger (in Chinese). Acta Phys Sin, 2014, 63: 2050510.7498/aps.63.020505 ↗
48. Xia S J, Chen L G, Sun F R. Entransy dissipation minimization for a class of one-way isothermal mass transfer processes. Sci China Tech Sci, 2011, 54: 352–36110.1007/s11431-010-4153-7 ↗
49. Yuan F, Chen Q. Optimization criteria for the performance of heat and mass transfer in indirect evaporative cooling systems. Chin Sci Bull, 2012, 57: 687–69310.1007/s11434-011-4903-3 ↗
50. Zhou B, Cheng X T, Wang W H, et al. Entransy analyses of thermal processes with variable thermophysical properties. Int J Heat Mass Transf, 2015, 90: 1244–125410.1016/j.ijheatmasstransfer.2015.07.037 ↗
51. Cheng X T, Liang X G. Entransy, entransy dissipation and entransy loss for analyses of heat transfer and heat-work conversion processes. J Therm Sci Tech, 2013, 8: 337–35210.1299/jtst.8.337 ↗
52. Wang W, Cheng X, Liang X. Analyses of the endoreversible Carnot cycle with entropy theory and entransy theory. Chin Phys B, 2013, 22: 11050610.1088/1674-1056/22/11/110506 ↗
53. Yang A B, Chen L G, Xia S J, et al. The optimal configuration of reciprocating engine based on maximum entransy loss. Chin Sci Bull, 2014, 59: 2031–203810.1007/s11434-014-0236-3 ↗
54. Li T, Fu W, Zhu J. An integrated optimization for organic Rankine cycle based on entransy theory and thermodynamics. Energy, 2014, 72: 561–57310.1016/j.energy.2014.05.082 ↗
55. Zhu Y, Hu Z, Zhou Y, et al. Applicability of entropy, entransy and exergy analyses to the optimization of the organic Rankine cycle. Energy Conv Manag, 2014, 88: 267–27610.1016/j.enconman.2014.07.082 ↗
56. Wang W, Cheng X, Liang X. T-Q diagram analyses and entransy optimization of the organic flash cycle (OFC). Sci China Tech Sci, 2015, 58: 630–63710.1007/s11431-014-5765-0 ↗
57. Kim K H, Kim K. Comparative analyses of energy-exergy-entransy for the optimization of heat-work conversion in power generation systems. Int J Heat Mass Transf, 2015, 84: 80–9010.1016/j.ijheatmasstransfer.2015.01.002 ↗
58. Ahmadi M H, Ahmadi M A, Pourfayaz F, et al. Thermodynamic analysis and multi-objective optimization of performance of solar dish Stirling engine by the centrality of entransy and entropy generation. Int J Electr Power Energy, 2016, 78: 88–9510.1016/j.ijepes.2015.11.042 ↗
59. Feng H J, Chen L G, Xie Z H, et al. Constructal entransy optimizations for insulation layer of steel rolling reheating furnace wall with convective and radiative boundary conditions. Chin Sci Bull, 2014, 59: 2470–247710.1007/s11434-014-0248-z ↗
60. Feng H J, Chen L G, Xie Z H, et al. Constructal entransy dissipation rate minimization for variable cross-section insulation layer of the steel rolling reheating furnace wall. Int Commun Heat Mass, 2014, 52: 26–3210.1016/j.icheatmasstransfer.2014.01.006 ↗
61. Feng H J, Chen L G, Xie Z H, et al. Constructal optimization of variable cross-section insulation layer of steel rolling reheating furnace wall based on entransy theory (in Chinese). Acta Phys Sin, 2015, 64: 05440210.7498/aps.64.054402 ↗
62. Liu X, Chen L G, Feng H J, et al. Constructal design for blast furnace wall based on the entransy theory. Appl Therm Eng, 2016, 100: 798–80410.1016/j.applthermaleng.2016.02.050 ↗
63. Chen L G. Progress in entransy theory and its applications. Chin Sci Bull, 2012, 57: 4404–442610.1007/s11434-012-5477-4 ↗
64. Zhao T, Chen Q. Macroscopic physical meaning of entransy and its application (in Chinese). Acta Phys Sin, 2013, 62: 23440110.7498/aps.62.234401 ↗
65. Chen Q, Liang X G, Guo Z Y. Entransy theory for the optimization of heat transfer: A review and update. Int J Heat Mass Transf, 2013, 63: 65–8110.1016/j.ijheatmasstransfer.2013.03.019 ↗
66. Chen L G. Progress in optimization of mass transfer processes based on mass entransy dissipation extremum principle. Sci China Tech Sci, 2014, 57: 2305–232710.1007/s11431-014-5726-7 ↗
67. Cheng X T, Liang X G. Entransy: Its physical basis, applications and limitations. Chin Sci Bull, 2014, 59: 5309–532310.1007/s11434-014-0661-3 ↗
68. Cheng X T, Liang X G. Work entransy and its applications. Sci China Tech Sci, 2015, 58: 2097–210310.1007/s11431-015-5939-4 ↗
69. Zhou L, Liu Y. Optimization of horizontal plate fin heat sink in natural convection for electronics cooling by simulated annealing algorithm. Adv Mater Res, 2014, 1022: 91–9510.4028/www.scientific.net/AMR.1022.91 ↗
70. Cheng X T, Zhang Q Z, Xu X H, et al. Optimization of fin geometry in heat convection with entransy theory. Chin Phys B, 2013, 22: 2050310.1088/1674-1056/22/2/020503 ↗
71. Yang A B, Chen L G, Xie Z H, et al. Comparative study on constructal optimizations of rectangular fins heat sink based on entransy dissipation rate minimization and maximum thermal resistance minimization (in Chinese). Acta Phys Sin, 2015, 64: 20440110.7498/aps.64.204401 ↗
72. Xie Z H, Chen L G, Sun F R. Comparative study on constructal optimizations of T-shaped fin based on entransy dissipation rate minimization and maximum thermal resistance minimization. Sci China Tech Sci, 2011, 54: 1249–125810.1007/s11431-011-4317-0 ↗
73. Chen L G, Xiao Q H, Xie Z H, et al. T-shaped assembly of fins with constructal entransy dissipation rate minimization. Int Commun Heat Mass, 2012, 39: 1556–156210.1016/j.icheatmasstransfer.2012.09.003 ↗
74. Xiao Q H, Chen L G, Xie Z H, et al. Constructal entransy dissipation rate minimization for Y-shaped assembly of fins (in Chinese). J Engng Thermophys, 2012, 33: 1465–1470
75. Chen L, Xiao Q, Xie Z, et al. Constructal entransy dissipation rate minimization for tree-shaped assembly of fins. Int J Heat Mass Transf, 2013, 67: 506–51310.1016/j.ijheatmasstransfer.2013.08.073 ↗
76. Feng H J, Chen L G, Xie Z H, et al. Constructal optimization of complex fin with convective heat transfer based on entransy dissipation rate minimization (in Chinese). Acta Phys Sin, 2015, 64: 3470110.7498/aps.64.034701 ↗
77. Das B, Giri A. Second law analysis of an array of vertical platefinned heat sink undergoing mixed convection. Int Commun Heat Mass, 2014, 56: 42–4910.1016/j.icheatmasstransfer.2014.04.019 ↗
78. Taji S G, Parishwad G V, Sane N K. Enhanced performance of horizontal rectangular fin array heat sink using assisting mode of mixed convection. Int J Heat Mass Transf, 2014, 72: 250–25910.1016/j.ijheatmasstransfer.2014.01.012 ↗
79. Zhou J H, Yang C X, Zhang L N. Minimizing the entropy generation rate of the plate-finned heat sinks using computational fluid and combined optimization. Appl Therm Eng, 2009, 29: 1872–187910.1016/j.applthermaleng.2008.08.001 ↗
80. Zhang X H, Liu D W. Optimum geometric arrangement of vertical rectangular fin arrays in natural convection. Energy Conv Manage, 2010, 51: 2449–245610.1016/j.enconman.2010.05.009 ↗
81. Baskaya S, Sivrioglu M, Ozek M. Parametric study of natural convection heat transfer from horizontal rectangular fin arrays. Int J Therm Sci, 2000, 39: 797–80510.1016/S1290-0729(00)00271-4 ↗
82. Chen H, Lai S, Haung L. Investigation of heat transfer characteristics in plate-fin heat sink. Appl Therm Eng, 2013, 50: 352–36010.1016/j.applthermaleng.2012.08.040 ↗
83. Morega M, Bejan A. Plate fins with variable thickness and height for air-cooled electronic modules. Int J Heat Mass Transf, 1994, 37: 433–44510.1016/0017-9310(94)90043-4 ↗
84. Kim D K. Thermal optimization of plate-fin heat sinks with fins of variable thickness under natural convection. Int J Heat Mass Transf, 2012, 55: 752–76110.1016/j.ijheatmasstransfer.2011.10.034 ↗
85. Chen Q. Irreversibility and Optimization of Convective Transport Processes (in Chinese). Beijing: Tsinghua University, 2008