journal article·2016-05

Liquid spreading on a pre-wetted biomimetic surface inspired by a dog’s tongue

ChengChun Zhang, ZhengYang Wu, ZhiZhao Che, XueLi Li, YouHong Sun, LuQuan Ren

Publisher page

Abstract

Liquid film flow widely exists in industries due to its high thermal efficiency and low flow flux. The spreading of the liquid film is strongly influenced by the properties of the working surface. A biomimetic surface with multi-scale structures inspired by the skin of a dog’s tongue is proposed in this paper for the enhancement of heat and mass transfer. The spreading and flow behaviors of a gravity-driven liquid falling down the pre-wetted biomimetic surface are compared with that on the smooth surfaces, via the combination of numerical simulations using the volume of fluid (VOF) method, and experimental measurements using high-speed imaging. On the pre-wetted smooth substrate, liquid merges with two droplets before the free surface of the liquid slowly develops into a parabolic shape. In contrast, on the biomimetic surface, liquid rapidly and uniformly spreads into a thin film which could effectively enhance mass transfer in both spanwise and streamwise directions. The characteristics and distribution of the microstructures on the proposed biomimetic surface are potentially to be used to guide the design of the surface in high efficiency heat exchangers and reactors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fluid Dynamics and Thin Films · Surface Modification and Superhydrophobicity · Fluid Dynamics and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Min J K, Park I S. Numerical study for laminar wavy motions of liquid film flow on vertical wall. Int J Heat Mass Transfer, 2001, 54: 3256–326610.1016/j.ijheatmasstransfer.2011.04.005 ↗
2. Cioncolini A, Thome J R. Liquid film circumferential asymmetry prediction in horizontal annular two-phase flow. Int J Multiphase Flow, 2013, 51: 44–5410.1016/j.ijmultiphaseflow.2012.12.003 ↗
3. Maiti R N, Khanna R, Sen P K, et al. Enhanced liquid spreading due to porosity. Chem Eng Sci, 2004, 59: 2817–282010.1016/j.ces.2004.04.017 ↗
4. Kohrt M, Ausner I, Wozny G, et al. Texture influence on liquid-side mass transfer,. Chem Eng Res Des, 2011, 89: 1405–141310.1016/j.cherd.2011.01.010 ↗
5. Gonda A, Lancereau P, Banderlier P, et al. Water falling film evaporation on a corrugated plate. Int J Therm Sci, 2014, 81: 29–3710.1016/j.ijthermalsci.2014.02.010 ↗
6. Chudnovsky Y. Experimental evaluation of heat transfer, pressure drop, and fouling mitigation potential in finned, dimpled and bare tube bundles. Int J Energ Clean Envir, 2008, 9: 103–11810.1615/InterJEnerCleanEnv.v9.i1-3.80 ↗
7. Dubrovskii V, Podvysotskii A, Shraiber A, et al. Heat transfer between liquid film formed on the inclined dimpled surface and ambient air. In: ASME 2011 International Mechanical Engineering Congress and Exposition, Denver, Colorado, USA, 2011. 961–962
8. Khoo H S, Tseng F G. Spontaneous high-speed transport of subnanoliter water droplet on gradient nanotextured surfaces. Appl Phys Lett, 2009, 95: 6310810.1063/1.3197574 ↗
9. Nagayama G, Kawagoe M, Tokunaga A, et al. On the evaporation rate of ultra-thin liquid film at the nanostructured surface: A molecular dynamics study. Int J Therm Sci, 2010, 49: 59–6610.1016/j.ijthermalsci.2009.06.001 ↗
10. Köroglu B, Lee K S, Park C. Nano/micro-scale surface modifications using copper oxidation for enhancement of surface wetting and falling- film heat transfer. Int J Heat Mass Transfer, 2013, 62: 794–80410.1016/j.ijheatmasstransfer.2013.03.040 ↗
11. Kim S J, Moon M W, Lee K R, et al. Liquid spreading on superhydrophilic micropillar arrays. J Fluid Mech, 2011, 680: 477–48710.1017/jfm.2011.210 ↗
12. Tourvieille J N, Bornette F, Philippe R, et al. Mass transfer characterization of a microstructured falling film at pilot scale. Chem Eng J, 2013, 227: 182–19010.1016/j.cej.2012.07.095 ↗
13. Malshe A, Rajurkar K, Samant A, et al. Bio-inspired functional surfaces for advanced applications. CIRP Ann-Manuf Techn, 2013, 62: 607–62810.1016/j.cirp.2013.05.008 ↗
14. Hancock M J, Sekeroglu K, Demirel M C. Bioinspired directional surface for adhesion, wetting, and Transport. Adv Funct Mater, 2012, 22: 2223–223410.1002/adfm.201103017 ↗
15. Parker A R, Lawrence C R. Water capture by a desert beetle. Nature, 2001, 414: 33–3410.1038/35102108 ↗
16. Reif W E. Morphology and hydrodynamic effects of the scales fast swimming sharks. Forts Zool, 1985, 30: 483–485
17. Bechert D W, Bruse M, Hage W. Experiments with three-dimensional riblets as an idealized model of shark skin. Exp Fluids, 2000, 28: 403–41210.1007/s003480050400 ↗
18. Viswanath P R. Aircraft viscous drag reduction using riblets. Prog Aerosp Sci, 2002, 38: 571–60010.1016/S0376-0421(02)00048-9 ↗
19. Lang A W, Motta P, Hidalgo P, et al. Bristled shark skin: a microgeometry for boundary layer control? Bioinspir Biomim, 2008, 3: 1–9
20. Lietmeyer C, Oehlert K, Seume J R. Optimal application of riblets on compressor blades and their contamination behavior. J Turbomach, 2013, 135: 0010360-1–0010360-1010.1115/1.4007590 ↗
21. Yokota M, Berglund L G, Xu X J. Thermoregulatory modeling use and application in the military workforce. Appl Ergon, 2014, 45: 663–67010.1016/j.apergo.2013.09.010 ↗
22. Gao D, Morley N B, Dhir V. Numerical simulation of wavy falling film flow using VOF method. J Comput Phys, 2003, 192: 624–64210.1016/j.jcp.2003.07.013 ↗
23. Gu F, Liu C J, Yuan X G, et al. CFD simulation of liquid film flow on inclined plates. Chem Eng Technol, 2004, 27: 1099–110410.1002/ceat.200402018 ↗
24. Brambilla P, Guardone A. Automatic tracking of corona propagation in three-dimensional simulations of non-normal drop impact on a liquid film. Computing, 2013, 95: 415–42410.1007/s00607-012-0271-3 ↗
25. Lan H, Wegener J L, Armaly B F, et al. Developing laminar gravity- driven thin liquid film flow down an inclined plane. J Fluids Eng, 2010, 132: 1–8
26. Brackbill J U, Kothe D B, Zemach C. A Continuum method for modeling surface tension. J Comput Phys, 1992, 100: 335–35410.1016/0021-9991(92)90240-Y ↗
27. Ristenpart W D, McCalla P M, Roy R V, et al. Coalescence of spreading droplets on a wettable substrate. Phys Rev Lett, 2006, 97: 064501.1–064501.10.1103/PhysRevLett.97.064501 ↗
28. Andrieu C, Beysens D A, Nikolayev V S, et al. Coalescence of sessile drops. J Fluid Mech, 2002, 453: 427–43810.1017/S0022112001007121 ↗