journal article·2013-07

Numerical simulation on heat transfer inside rotating porous disk subjected to local heat flux

XingDan Zhu, JingZhou Zhang, XiaoMing Tan

Publisher page

Abstract

Numerical simulation was carried out to study the centrifugally-driven flow and heat transfer inside rotating metallic porous disk subjected to local heat flux. The effects of rotational speed, solid thermal conductivity and porosity on heat transfer were analyzed. The thermal transport coefficient, defined as the ratio of local heat flux to maximum temperature difference on the disk, was introduced to evaluate the thermal transport capacity in rotating porous disk. For convenience, the conjugation between convective heat transfer inside the rotating porous disk and convective heat transfer over the rotating disk surface was decoupled in the present study. Firstly, the convective heat transfer over the free rotating disk surface was investigated individually to determine the heat transfer coefficient over the disk surface to the ambient air. Then the convective heat transfer over a rotating disk surface was treated as the thermal boundary condition for the computation of convective heat transfer inside rotating porous disk. Under the present research conditions, the results show that the centrifugally-driven flow is enhanced significantly with the increase of rotational speed. Consequently, the maximum temperature on the disk surface is decreased and the temperature distribution tends to be uniform. The thermal transport capacity in rotating porous disk is also enhanced with the increase of solid thermal conductivity or the decrease of solid porosity. In the rotating porous disk, the solid phase heat transfer is clearly the dominant mode of heat transport and the fluid phase makes an incremental contribution to the total heat transfer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Heat and Mass Transfer in Porous Media · Nanofluid Flow and Heat Transfer · Heat Transfer Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Ramesh K, Huang H, Yin L. Analytical and experimental investigation of coolant velocity in high speed grinding. Int J Mach Tool Manu, 2004, 44: 1069–107610.1016/j.ijmachtools.2004.02.017 ↗
2. Kovacevic R, Cherukuthota C, Mazurkiewicz M. High pressure water jet cooling/lubrication to improve machining efficiency in milling. Int J Mach Tool Manu, 1995, 35: 1459–147310.1016/0890-6955(95)00128-K ↗
3. Xiao B, Xu H J, Fu Y C, et al. Study on grinding burn with radial water jet impingement cooling and brazed grinding wheel (in Chinese). Chinese J Mech Eng, 2002, 38(1): 91–9410.3901/JME.2002.01.091 ↗
4. Kaminski J, Alvelid B. Temperature reduction in the cutting zone in water-jet assisted turning. J Mater Proc Technol, 2000, 106: 68–7310.1016/S0924-0136(00)00640-3 ↗
5. Xu H J, Fu Y C, Sun F H, et al. Fundamental studies on enhancing heat transfer in contact zone during high efficiency grinding. Sci China Ser E-Tech Sci, 2002, 45(3): 261–27210.1360/02ye9031 ↗
6. Babic D, Murray D B, Torrance A A. Mist jet cooling of grinding processes. Int J Mach Tool Manu, 2005, 45: 1171–117710.1016/j.ijmachtools.2004.12.004 ↗
7. Liu J Y, Han R D, Sun Y F. Research on experiments and action mechanism with water vapor as coolant and lubricant in green cutting. Int J Mach Tool Manu, 2005, 45(6): 687–69410.1016/j.ijmachtools.2004.09.022 ↗
8. An Q L, Fu Y C, Xu J H, et al. The application of cryogenic pneumatic mist jet impinging in high-speed milling of Ti-6Al-4V. Key Eng Mater, 2006, 315-316: 244–24810.4028/www.scientific.net/KEM.315-316.244 ↗
9. Zhang J Z, Tan X M, Liu B, et al. Investigation for convective heat transfer on grinding work-piece surface subjected to a mist/air impinging jet. Appl Therm Eng, 2013, 51: 653–66110.1016/j.applthermaleng.2012.10.011 ↗
10. Su H H, Ma K, Fu Y C, et al. Investigation of enhancing heat transfer in grinding zone with loop heat pipe wheel. J Nanjing Univ Aeronaut Astronaut, 2012, 44(2): 233–239
11. Wang S, Guo Z Y, Li Z X. Heat transfer enhancement by using metallic filament insert in channel flow. Int J Heat Mass Transfer, 2001, 44: 1373–137810.1016/S0017-9310(00)00173-3 ↗
12. Pavel B I, Mohamad A A. An experimental and numerical study on heat transfer enhancement for gas heat exchangers fitted with porou media. Int J Heat Mass Transfer, 2004, 47: 4939–495210.1016/j.ijheatmasstransfer.2004.06.014 ↗
13. Zhao C Y, Kim T, Lu T J, et al. Thermal transport in high porosity cellular metal foams. J Thermophys Heat Transfer, 2004, 18: 309–31710.2514/1.11780 ↗
14. Tzeng S C, Soong C Y, Wong S C. Heat transfer in rotating channel with open cell porous aluminum foam. Int Commu Heat Mass Transfer, 2004, 31(2): 344–348
15. Braga E J, DeLemos M J S. Computation of turbulent free convection in left and right tilted porous enclosures using a macroscopic k-ɛ model. Int J Heat Mass Transfer, 2008, 51: 5279–528710.1016/j.ijheatmasstransfer.2008.03.016 ↗
16. Zhao P H, Ye T H, Zhu M M, et al. Numerical investigation on hydrogen production by CH4-Rich combustion in an alumina foam. Sci China Tech Sci, 2009, 52(10): 2960–296610.1007/s11431-009-0251-9 ↗
17. Zhao K, Li Q, Xuan Y M. Investigation on the three-dimensional multiphase conjugate conduction problem inside porous wick with the lattice Boltzmann method. Sci China Tech Sci, 2009, 52(10): 2973–298010.1007/s11431-009-0103-7 ↗
18. Jiang P X, Xiang H, Xu R N. Theoretical and experimental study of the thermal conductivity of nanoporous media. Sci China Tech Sci, 2012, 55(8): 2140–214710.1007/s11431-012-4865-y ↗
19. Chen C C, Huang P C, Hwang H Y. Enhanced forced convective cooling of heat sources by metal-foam porous layers. Int J Heat Mass Transfer, 2013, 58: 356–37310.1016/j.ijheatmasstransfer.2012.11.041 ↗
20. Jou J J, Liaw J S. Thermal convection in a porous medium subject to transient heating and rotation. Int J Heat Mass Transfer, 1987, 30: 208–21110.1016/0017-9310(87)90076-7 ↗
21. Vadasz P. Convection and stability in a rotating porous layer with alternating direction of the centrifugal body force. Int J Heat Mass Transfer, 1996, 39: 1639–164710.1016/0017-9310(95)00258-8 ↗
22. Alex S M, Patil P R. Thermal instability in an anisotropic rotating porous medium. J Fluid Mech, 2000, 252: 79–98
23. Beg O A, Takhar H S, Beg T A, et al. Modelling convection heat transfer in a rotating fluid in a thermally-stratified high-porosity medium: numerical finite difference solutions. Int J Fluid Mech Res, 2005, 32: 383–40110.1615/InterJFluidMechRes.v32.i4.10 ↗
24. Xia J, Chang H P. Effect of different porosity on thermally driven heat transfer in a centrifugal force field (in Chinese). J Aerosp Power, 2006, 21(6): 972–977
25. Lee D Y, Vafai K. Analytical characterization and conceptual assessment of solid and fluid temperature differentials in porous media. Int J Heat Mass Transfer, 1999, 42: 423–43510.1016/S0017-9310(98)00185-9 ↗
26. Alazmi B, Vafai K. Analysis of fluid flow and heat transfer interfacial conditions between a porous medium and a fluid layer. Int J Heat Mass Transfer, 2001, 44: 1735–174910.1016/S0017-9310(00)00217-9 ↗
27. Kim S J, Jang S P. Effects of the Darcy number, the Prandtl number and the Reynolds number on the local thermal non-equilibrium. Int J Heat Mass Transfer, 2002, 45: 3885–389610.1016/S0017-9310(02)00109-6 ↗
28. Nield D A. Modelling fluid flow and heat transfer in a saturated porous medium. J Appl Math Decis Sci, 2000, 4: 165–17310.1155/S1173912600000122 ↗
29. ANSYS Fluent v12.0 Software User’s Gide, 2009
30. Holman J P. Heat Transfer. 9th ed. New York: McGraw-Hill, 2002