journal article·2023-07

Effects of Silane-Treated High-Content Cellulose Okra Fibre and Tamarind Kernel Powder on Mechanical, Thermal Stability and Water Absorption Behaviour of Epoxy Composites

V. Sivakumar, S. Kaliappan, L. Natrayan, Pravin P. Patil

Silicon· Volume 15· Issue 10
Publisher page

Abstract

In this study, silane-treated high-content cellulose okra fiber (CCO) and macromolecule tamarind kernel powder (MTP) toughened epoxy composites are analyzed for their mechanical, thermal stability, and water-absorption behavior. The primary purpose of this research was to evaluate the impact of surface-modified high-content cellulose okra fiber and the contribution of tamarind kernel macromolecule powder on several parameters of epoxy resin composite. Surfaces of the fiber and particle were treated with 3-aminopropyltrimethoxysilane, an amino silane (APTMS). The composites were made via hand lay-up and post cured at 120 °C. It is observed that composite designation OT4 shows the highest values for tensile strength and flexural strength 162.4 MPa and 194.6 MPa respectively. Increased adherence and distribution of kernel particles in the resin, as seen in SEM images, allowed for a maximum hardness of 92 shore-D to be measured in the hardness test. In addition, the silane-treated reinforcements in composites maintained their hydrophobicity lower contact angle up to 80° and as well as 0.13 water absorption %. Thus it is clear that silane treatment process on fiber and filler particle out performed well in improving the property of composites. Such composites with improved properties would be ideal for use in the construction of buildings, military armor, sporting items, and household appliances.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Electrospun Nanofibers in Biomedical Applications · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Selmy et al (2019) J Thermoplast Compos Mater 32(2):267–293. https://doi.org/10.1177/089270571775102210.1177/0892705717751022 ↗
2. Najafi M, et al (2022) Springer, Singapore. https://doi.org/10.1007/978-981-15-8141-0_16-110.1007/978-981-15-8141-0_16-1 ↗
3. Abd MA, et al. (2022) J Nat Fibers 19:1, 303–318, https://doi.org/10.1080/15440478.2020.173959410.1080/15440478.2020.1739594 ↗
4. El-baky A et al (2020) J Compos Mater 54(27):4185–4205. https://doi.org/10.1177/002199832092850910.1177/0021998320928509 ↗
5. Alshahrani H, Prakash VRA (2022). Biomass Conv Bioref. https://doi.org/10.1007/s13399-022-02801-w10.1007/s13399-022-02801-w ↗
6. Prakash VRA, Rajadurai A (2016) Appl Surf Sci 384: 99–10610.5005/jp/books/12909_5 ↗
7. Rajadurai A (2017) Defence Technology 1(13):40–46
8. Alshahrani H, Prakash VRA (2023) Industrial Crops and Products 191: 11596710.1016/j.indcrop.2022.115967 ↗
9. Srinivasababu N (2015) In IOP conference series: materials science and engineering, vol. 83, no. 1, p. 012003. IOP Publishing10.1088/1757-899X/83/1/012003 ↗
10. Santulli C, Sarasini F, Fortunati E, Puglia D, Kenny JM (2014) Okra fibres as potential reinforcement in biocomposites. In Biomass and bioenergy, pp. 175–190. Springer, Cham10.1007/978-3-319-07641-6_11 ↗
11. Gupta PK, et al. (2021) Journal of Natural Fibers 18(11): 1788–180010.1080/15440478.2019.1697997 ↗
12. Srinivasan T et al. IOP Conference Series: Materials Science and Engineering (Vol. 988, No. 1, p. 012022). IOP Publishing10.1088/1757-899X/988/1/012022 ↗
13. Kiruthika AV, Priyadarzini TR, Veluraja K (2012) Fibers and Polymers 13(1):51–5610.1007/s12221-012-0051-x ↗
14. Chandrasekar et al. (2018) Carbohydrate Polymers. 186. https://doi.org/10.1016/j.carbpol.2018.01.05710.1016/j.carbpol.2018.01.057 ↗
15. Alshahrani H et al. (2022) J Industr Textiles 52: 1528083722113738210.1177/15280837221137382 ↗
16. Ravindran et al (2020) Int J Biol Macromol 156:997–1006. https://doi.org/10.1016/j.ijbiomac.2020.04.11710.1016/j.ijbiomac.2020.04.117 ↗
17. Alshahrani H, Prakash VRA (2022) Progress in organic coatings 172: 10708010.1016/j.porgcoat.2022.107080 ↗
18. Abd et al (2017) Fibers Polym 18:2417–2432. https://doi.org/10.1007/s12221-017-7682-x10.1007/s12221-017-7682-x ↗
19. M. A.Abd et al. (2022) J Nat Fibers 19:3, 954–968, https://doi.org/10.1080/15440478.2020.177575010.1080/15440478.2020.1775750 ↗
20. Alshahrani H (2022) and Arun Prakash VR. Biomass Conv Bioref. https://doi.org/10.1007/s13399-022-02691-y10.1007/s13399-022-02691-y ↗
21. Marwa et al. J Nat Fibers, 18:8, 1163–1180, https://doi.org/10.1080/15440478.2019.168706910.1080/15440478.2019.1687069 ↗
22. Alshahrani H et al. (2022) Coatings 12, no. 10: 142310.3390/coatings12101423 ↗
23. Jayabalakrishnan D, et al. J. D., P. P., M. I. S.,M. V., R. S., A. P. V. R. (2021) Polym. Compos. 1.https://doi.org/10.1002/pc.263931010.1002/pc.2639310 ↗
24. Arun Prakash VR et al (2020). Biomass Conv Bioref. https://doi.org/10.1007/s13399-020-00938-010.1007/s13399-020-00938-0 ↗
25. Prakash VRA, Depoures MV (2020) Silicon 12(11): 2533–254410.1007/s12633-019-00347-7 ↗
26. Dinesh T et al (2019) Silicon 11(5):2487–249810.1007/s12633-018-9886-0 ↗
27. Prakash A, et al. (2019) Silicon no. https://doi.org/10.1007/s12633-019-003410.1007/s12633-019-0034 ↗
28. El-baky A et al (2019) J Compos Mater 53(21):3033–3045. https://doi.org/10.1177/002199831880952510.1177/0021998318809525 ↗
29. Vinothkumar et al. (2019) Mater Res Express 6(11), https://doi.org/10.1088/2053-1591/ab4e0310.1088/2053-1591/ab4e03 ↗
30. Arun VR, et al. (2019) Int J Plast Technol. vol. 23:, no. https://doi.org/10.1007/s12588-019-09251-6., p. 207–21710.1007/s12588-019-09251-6 ↗
31. Alshahrani H (2022) and VR Arun Prakash. Int J Biol Macromol 223:851–85910.1016/j.ijbiomac.2022.10.272 ↗
32. Alshahrani H, Prakash VRA (2022) J Clean Product 374: 13393110.1016/j.jclepro.2022.133931 ↗