Optimization of Mixing Parameters in Nanosilica Toughened Cement Mortar Using Taguchi-Grey Relational Analysis
Source abstract
Abstract
In this research, multi response Taguchi-grey relational approach was employed to optimize the mixing parameters in cement mortar preparation. The main aim of this present investigation is to find the optimal input variables like surface-modified nanosilica, water to cement ratio and plasticizer to achieve cement mortar with high compressive strength and low water absorption percentage. The surface-modification of nano-silica was done via aqueous solution method using 3-Aminopropyltrimethoxysilane. When the input variables are more than one Taguchi-grey relational approach is a best method since it may give difference set of optimum level for each response. It is observed that the addition of surface modified nano-silica in cement mortar influenced high compressive strength with lower water absorption percentage. According to analysis surface-modified nanosilica of 2 wt%, water to cement ratio of 0.5 and plasticizer of 1 wt% (A3B2C3) is found to be producing highest compression strength of 53.86 MPa and lower water absorption percentage of 3.32. The SEM morphological images revealed uniform dispersion of nano-silica particle in void content of cement mortar.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Senff L, Hotza D, Repette WL, Ferreira VM, Labrincha JA (2010) Mortars with nano-SiO2 and micro-SiO2 investigated by experimental design. Constr Build Mater 24(8):1432–1437. https://doi.org/10.1016/j.conbuildmat.2010.01.01210.1016/j.conbuildmat.2010.01.012 ↗
2. Shen W, Zhang C, Li Q, Zhang W, Cao L, Ye J (2015) Preparation of titanium dioxide nano particle modified photocatalytic self-cleaning concrete. J Clean Prod 87:762–765. https://doi.org/10.1016/j.jclepro.2014.10.01410.1016/j.jclepro.2014.10.014 ↗
3. Sanchez F, Sobolev K (2010) Nanotechnology in concrete-a review. Constr Build Mater 24:2060–2071. https://doi.org/10.1016/j.conbuildmat.2010.03.01410.1016/j.conbuildmat.2010.03.014 ↗
4. Said AM, Zeidan MS, Bassuoni MT, Tian Y (2012) Properties of concrete incorporating nano-silica. Constr Build Mater 36:838–844. https://doi.org/10.1016/j.conbuildmat.2012.06.04410.1016/j.conbuildmat.2012.06.044 ↗
5. Ltifi M, Guefrech A, Mounanga P, Khelidj A (2011) Experimental study of the effect of addition of nano-silica on the behaviour of cement mortars. Procedia Eng 10:900–905. https://doi.org/10.1016/j.proeng.2011.04.14810.1016/j.proeng.2011.04.148 ↗
6. Rahmani K, Shamsai A, Saghafian B, Peroti S (2012) Effect of water and cement ratio on compressive strength and abrasion of micro silica concrete. Middle-East J Sci Res 12(8):1056–1061. https://doi.org/10.5829/idosi.mejsr.2012.12.8.333310.5829/idosi.mejsr.2012.12.8.3333 ↗
7. Liu X, Chen L, Liu A, Wang X (2012) Effect of nano-CaCO3 on properties of cement paste 2012. Int Conf on Future Energy Environment and Materials, Energy Proceedia 16:991–996. https://doi.org/10.1016/j.egypro.2012.01.15810.1016/j.egypro.2012.01.158 ↗
8. Mosaberpanah MA, Eren O, Tarassoly AR (2019) The effect of nano-silica and waste glass powder on mechanical, rheological, and shrinkage properties of UHPC using response surface methodology. J Mater Res Technol 8(1):804–811. https://doi.org/10.1016/j.jmrt.2018.06.01110.1016/j.jmrt.2018.06.011 ↗
9. Manzoor Z, Barbhuiya S, Shaikh F, Cheema D (2018) Optimizing the amounts of micro-silica and nano-silica in concrete using response surface method. Proc. of 24th Conf, on Mechanics of Structures and Materials: Advancements and Challenges, pp.1871–1874
10. Bhanja, S., Sengupta, B. (2002). “Investigations on the compressive strength of silica fume concrete using statistical methods.”Cem Concr Res, Vol.32, No.9,pp.1391–1394, https://doi.org/10.1016/s0008-8846(02)00787-110.1016/s0008-8846(02)00787-1 ↗
11. ArunPrakash VR, Rajadurai A (2016) Thermo-mechanical characterization of siliconized E-glass fibre/hematite particles reinforced epoxy resin hybrid composite. Appl Surf Sci 384(16):99–106
12. Arun Prakash VR, Xavier JF, Ramesh G, Maridurai T, Kumar KS, Raj RBS (2020) Mechanical, thermal and fatigue behaviour of surface-treated novel Caryota urens fibre–reinforced epoxy composite. Biomass Conv Bioref. https://doi.org/10.1007/s13399-020-00938-010.1007/s13399-020-00938-0 ↗
13. Jayabalakrishnan D, Saravanan K, Ravi S, Prabhu P, Maridurai T, Prakash VRA (2020) Fabrication and characterization of acrylonitrile butadiene rubber and stitched E-glass fibre tailored Nano-silica epoxy resin composite. Silicon. https://doi.org/10.1007/s12633-020-00612-010.1007/s12633-020-00612-0 ↗
14. Ben Samuel J, Julyes Jaisingh S, Sivakumar K, Mayakannan AV, Arunprakash VR (2020) Visco-elastic, thermal, antimicrobial and dielectric behaviour of areca fibre-reinforced nano-silica and neem oil-toughened epoxy resin bio composite. Silicon. https://doi.org/10.1007/s12633-020-00569-010.1007/s12633-020-00569-0 ↗
15. Du H, Pang SD (2019) High performance cement composites with colloidal nano-silica. Constr Build Mater 224:317–32510.1016/j.conbuildmat.2019.07.045 ↗
16. Sevim Ö, Demir İ (2019) Optimization of fly ash particle size distribution for cementitious systems with high compactness. Constr Build Mater 195:104–11410.1016/j.conbuildmat.2018.11.080 ↗
17. Mal'chik AG, Litovkin SV, Rodionov PV (2015) Investigations of physicochemical properties of bottom-ash materials for use them as secondary raw materials. In IOP Conference Series: Materials Science and Engineering 91:01208110.1088/1757-899X/91/1/012081 ↗
18. Alghdeir M, Mayya K, Dib M (2019) Characterization of nanosilica/low-density polyethylene nanocomposite materials. J Nanomater 2019:1–810.1155/2019/4184351 ↗
19. Rego JHS, Nepomuceno AA, Figueiredo EP, Hasparyk NP, Borges LD (2015) Effect of particle size of residual rice-husk ash in consumption of Ca (OH) 2. J Mater Civ Eng 27(6):0401417810.1061/(ASCE)MT.1943-5533.0001136 ↗
20. Muthuramalingam T, Mohan B (2013) Taguchi-grey relational based multi response optimization of electrical process parameters in electrical discharge machining. Indian J Eng Mater Sci 20:471–475
21. Pillai JU, Sanghrajka I, Shunmugavel M, Muthuramalingam T, Goldberg M (2018) Guy little fair, Optimisation of multiple response characteristics on end milling of aluminium alloy using Taguchi-Grey relational approach. Measurement 124:291–29810.1016/j.measurement.2018.04.052 ↗
22. Shoja MZ, Naddaf HE (2017) Optimizing compressive strength of micro- and nano-silica concrete by Statistical method. Civ Eng J 3(11). https://doi.org/10.28991/cej-03093910.28991/cej-030939 ↗
23. Arunprakash VR, Viswanathan R (2019) Fabrication and characterization of Echinoidea spike particles and Kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio composite. Composites: A 118:317–32610.1016/j.compositesa.2019.01.008 ↗
24. ArunPrakash VR, Rajadurai A (2017) Inter laminar shear strength behavior of acid, base and Silane treated E-glass fibre epoxy resin composites on drilling process. Defence Technol 13:40–4610.1016/j.dt.2016.11.004 ↗
25. Zhang MH, Islam J, Peethamparan S (2012) Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slag. Cem Concr Compos 34:650–662. https://doi.org/10.1016/j.cemconcomp.2012.02.00510.1016/j.cemconcomp.2012.02.005 ↗
26. Sharobim KG, Mohammedin HA (2013) The effect of Nano-liquid on the properties of hardened concrete. HBRC Journal 9:210–215. https://doi.org/10.1016/j.hbrcj.2013.08.00210.1016/j.hbrcj.2013.08.002 ↗
27. Senff L, Labrincha JA, Ferreira VM, Hotza D, Wellington L, Repette WL (2009) Effect of nano-silica on rheology and fresh properties of cement pastes and mortars. Constr Build Mater 23:2487–2491. https://doi.org/10.1016/j.conbuildmat.2009.02.00510.1016/j.conbuildmat.2009.02.005 ↗