Amorphous Silicon Particles/Polyaniline Composites for Hybrid Photovoltaic Solar Cell: an Experimental Feasibility Study
Source abstract
Abstract
Abstract Hybrid heterojunctions of Polyaniline/Amorphous Silicon (PAni / a-Si:H) were synthesized in order to fabricate the active layer of the polymeric solar cells. For this purpose, amorphous silicon nanoparticles were blended with polyaniline which was synthesized through oxidative polymerization. Then the resultant nanocomposite was applied on FTO in the FTO/ZnO/PANI:a-Si/Ag structure using the spin coating method. The effect of amorphous silicon content on light-harvesting efficiency was studied using the UV-VIS spectroscopy data, electrochemical impedance spectroscopy (EIS), and the incident photon to current efficiency (IPCE) analysis. PAni / a-Si:H nanocomposites were characterized structurally and morphologically using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), and X-ray diffraction (XRD) analysis. Current-Voltage measurements of the photovoltaic cells based on PAni / a-Si:H nanocomposites showed that by increasing the amount of a-Si:H in the active layer by 40 Wt%, the efficiency of the cell increases up to 2k times compared to the cell made with pure PAni. Also, in general, cell efficiencies increased slightly with decreasing the size of amorphous silicon nanoparticles at a constant PAni / a-Si:H weight ratio. The impact of a-Si:H weight percent is more significant in the case of smaller silicon particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Chen LX (2019) Organic solar cells: recent progress and challenges. ACS Publications, pp 2537–253910.1021/acsenergylett.9b02071 ↗
2. Chen X, Wang D, Wang Z, Li Y, Zhu H, Lu X, Chen W, Qiu H, Zhang Q (2021) 18.02% efficiency ternary organic solar cells with a small-molecular donor third component. Chem Eng J 424:13039710.1016/j.cej.2021.130397 ↗
3. An Q, Wang J, Gao W, Ma X, Hu Z, Gao J, Xu C, Hao M, Zhang X, Yang C (2020) Alloy-like ternary polymer solar cells with over 17.2% efficiency. Sci Bull 65(7):538–54510.1016/j.scib.2020.01.012 ↗
4. Cai Y, Li Y, Wang R, Wu H, Chen Z, Zhang J, Ma Z, Hao X, Zhao Y, Zhang C (2021) A well-mixed phase formed by two compatible non‐fullerene acceptors enables ternary organic solar cells with efficiency over 18.6%. Adv Mater 33(33):210173310.1002/adma.202101733 ↗
5. Speller EM, Clarke AJ, Luke J, Lee HKH, Durrant JR, Li N, Wang T, Wong HC, Kim J-S, Tsoi WC (2019) From fullerene acceptors to non-fullerene acceptors: prospects and challenges in the stability of organic solar cells. J Mater Chem A 7(41):23361–2337710.1039/C9TA05235F ↗
6. Hong L, Yao H, Cui Y, Bi P, Zhang T, Cheng Y, Zu Y, Qin J, Yu R, Ge Z (2021) 18.5% efficiency organic solar cells with a hybrid planar/bulk heterojunction. Adv Mater 33(43):210309110.1002/adma.202103091 ↗
7. Cheng P, Yang Y (2020) Narrowing the band gap: the key to high-performance organic photovoltaics. Acc Chem Res 53(6):1218–122810.1021/acs.accounts.0c00157 ↗
8. Fu H, Li Y, Yu J, Wu Z, Fan Q, Lin F, Woo HY, Gao F, Zhu Z, Jen AK-Y (2021) High efficiency (15.8%) all-polymer solar cells enabled by a regioregular narrow bandgap polymer acceptor. J Am Chem Soc 143(7):2665–267010.1021/jacs.0c12527 ↗
9. Sun R, Wang W, Yu H, Chen Z, Xia X, Shen H, Guo J, Shi M, Zheng Y, Wu Y (2021) Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors. Joule 5(6):1548–156510.1016/j.joule.2021.04.007 ↗
10. Li Y (2012) Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. Acc Chem Res 45(5):723–73310.1021/ar2002446 ↗
11. Al Zoubi W, Kamil MP, Fatimah S, Nashrah N, Ko YG (2020) Recent advances in hybrid organic-inorganic materials with spatial architecture for state-of-the-art applications. Prog Mater Sci 112:10066310.1016/j.pmatsci.2020.100663 ↗
12. Lin G, Gao Z, Gao T, Chen Y, Geng Q, Li Y, Chen L, Li M (2021) Research progress in improving the performance of PEDOT: PSS/Micro-and nano-textured Si heterojunction for hybrid solar cells. J Materiomics 7(5):1161–117910.1016/j.jmat.2020.12.013 ↗
13. Liu R (2014) Hybrid organic/inorganic nanocomposites for photovoltaic cells. Materials 7(4):2747–277110.3390/ma7042747 ↗
14. He Q, Sheng W, Zhang M, Xu G, Zhu P, Zhang H, Yao Z, Gao F, Liu F, Liao X (2021) Revealing morphology evolution in highly efficient bulk heterojunction and pseudo-planar heterojunction solar cells by additives treatment. Adv Energy Mater 11(7):200339010.1002/aenm.202003390 ↗
15. He X, Chan CC, Kim J, Liu H, Su CJ, Jeng US, Su H, Lu X, Wong KS, Choy WC (2022) 1-Chloronaphthalene‐induced donor/acceptor vertical distribution and carrier dynamics changes in nonfullerene organic solar cells and the governed mechanism. Small Methods 6(3):210147510.1002/smtd.202101475 ↗
16. Lv J, Tang H, Huang J, Yan C, Liu K, Yang Q, Hu D, Singh R, Lee J, Lu S (2021) Additive-induced miscibility regulation and hierarchical morphology enable 17.5% binary organic solar cells. Energy Environ Sci 14(5):3044–305210.1039/D0EE04012F ↗
17. Yu R, Yao H, Hong L, Qin Y, Zhu J, Cui Y, Li S, Hou J (2018) Design and application of volatilizable solid additives in non-fullerene organic solar cells. Nat Commun 9(1):1–910.1038/s41467-018-07017-z ↗
18. Di Carlo Rasi D, Janssen RA (2019) Advances in solution-processed multijunction organic solar cells. Adv Mater 31(10):180649910.1002/adma.201806499 ↗
19. Zheng Z, Wang J, Bi P, Ren J, Wang Y, Yang Y, Liu X, Zhang S, Hou J (2022) Tandem organic solar cell with 20.2% efficiency. Joule 6(1):171–18410.1016/j.joule.2021.12.017 ↗
20. Xu T, Qiao Q (2011) Conjugated polymer–inorganic semiconductor hybrid solar cells. Energy Environ Sci 4(8):2700–272010.1039/c0ee00632g ↗
21. Ajayan J, Nirmal D, Mohankumar P, Saravanan M, Jagadesh M, Arivazhagan L (2020) A review of photovoltaic performance of organic/inorganic solar cells for future renewable and sustainable energy technologies. Superlattices Microstruct 143:10654910.1016/j.spmi.2020.106549 ↗
22. Lee YJ, Yeon C, Lim JW, Yun SJ (2018) Flexible p-type PEDOT: PSS/a-Si: H hybrid thin film solar cells with boron-doped interlayer. Sol Energy 163:398–40410.1016/j.solener.2018.02.026 ↗
23. Kim Y-H, Kim M, Oh S, Jung H, Kim Y, Yoon T-S, Kim Y-S, Ho Lee H (2012) Organic memory device with polyaniline nanoparticles embedded as charging elements. Appl Phys Lett 100(16):9110.1063/1.4704571 ↗
24. Ding Y, Sugaya M, Liu Q, Zhou S, Nozaki T (2014) Oxygen passivation of silicon nanocrystals: influences on trap states, electron mobility, and hybrid solar cell performance. Nano Energy 10:322–32810.1016/j.nanoen.2014.09.031 ↗
25. Charekhah R, Jarrahi Z, Darabi M, Imani A, Farzi G (2019) Bulk heterojunction solar cells based on polyaniline/multi wall carbon nanotube: from morphology control to cell efficiency. J Mater Sci: Mater Electron 30(1):26–36
26. Sinha S, Bhadra S, Khastgir D (2009) Effect of dopant type on the properties of polyaniline. J Appl Polym Sci 112(5):3135–314010.1002/app.29708 ↗
27. Zhao QN, Wu S, Miao DK (2011) Effect of substrate temperature on the haze and properties of SnO2: F thin film coated on glass (FTO) by spray pyrolysis process. In: Advanced materials research. Trans Tech Publ10.4028/www.scientific.net/AMR.150-151.1043 ↗
28. Ansari MO, Mohammad F (2011) Thermal stability, electrical conductivity and ammonia sensing studies on p-toluenesulfonic acid doped polyaniline: titanium dioxide (pTSA/Pani: TiO2) nanocomposites. Sens Actuators B 157(1):122–12910.1016/j.snb.2011.03.036 ↗
29. Arjunan V, Mohan S (2008) Fourier transform infrared and FT-Raman spectral analysis and ab initio calculations for 4-chloro-2-methylaniline and 4-chloro-3-methylaniline. J Mol Struct 892(1–3):289–29910.1016/j.molstruc.2008.05.053 ↗
30. Zhang M, Nautiyal A, Du H, Wei Z, Zhang X, Wang R (2021) Electropolymerization of polyaniline as high-performance binder free electrodes for flexible supercapacitor. Electrochim Acta 376:13803710.1016/j.electacta.2021.138037 ↗
31. Yoda H, Shiraishi K, Hiratani Y, Hanaizumi O (2004) a-Si: H/SiO 2 multilayer films fabricated by radio-frequency magnetron sputtering for optical filters. Appl Opt 43(17):3548–355410.1364/AO.43.003548 ↗
32. Mastelaro V, Flank A, Fantini MCdA, Bittencourt DdRS, Carreño M, Pereyra I (1996) On the structural properties of a-Si1 – x C x: H thin films. J Appl Phys 79(3):1324–132910.1063/1.361029 ↗
33. Bedini APC, Klingebiel B, Luysberg M, Carius R (2017) Sonochemical synthesis of hydrogenated amorphous silicon nanoparticles from liquid trisilane at ambient temperature and pressure. Ultrason Sonochem 39:883–88810.1016/j.ultsonch.2017.06.011 ↗
34. Swain BP (2006) SAXS analysis of the effect of H2 dilution on microstructural changes of HWCVD deposited a-SiC: H. Mater Lett 60(21–22):2767–277210.1016/j.matlet.2006.01.087 ↗
35. Schulze T, Korte L, Ruske F, Rech B (2011) Band lineup in amorphous/crystalline silicon heterojunctions and the impact of hydrogen microstructure and topological disorder. Phys Rev B 83(16):16531410.1103/PhysRevB.83.165314 ↗
36. Al-Marjeh A-QB, Atassi RY, Mohammad N, Badour Y (2019) Adsorption of methyl orange onto electrospun nanofiber membranes of PLLA coated with pTSA-PANI. Environ Sci Pollut Res 26:37282–3729510.1007/s11356-019-06654-1 ↗
37. Shao W, Jamal R, Xu F, Ubul A, Abdiryim T (2012) The effect of a small amount of water on the structure and electrochemical properties of solid-state synthesized polyaniline. Materials 5(10):1811–182510.3390/ma5101811 ↗
38. Bhadra S, Khastgir D (2008) Extrinsic and intrinsic structural change during heat treatment of polyaniline. Polym Degrad Stab 93(6):1094–109910.1016/j.polymdegradstab.2008.03.013 ↗
39. Tu T-T, Lee M, Kuo S-T, Den W (2016) Citric acid-modified carbon chemical filtration for cleanroom air quality control: study on N-methyl-2-pyrrolidone and the interference of co-existing toluene. Indoor Built Environ 25(5):772–78510.1177/1420326X15591638 ↗
40. Yau HC, Bayazit MK, Steinke JH, Shaffer MS (2015) Sonochemical degradation of N-methylpyrrolidone and its influence on single walled carbon nanotube dispersion. Chem Commun 51(93):16621–1662410.1039/C5CC06526G ↗
41. Wei X-L, Wang Y, Long S, Bobeczko C, Epstein A (1996) Synthesis and physical properties of highly sulfonated polyaniline. J Am Chem Soc 118(11):2545–255510.1021/ja952277i ↗
42. Gurunathan K, Amalnerkar D, Trivedi D (2003) Synthesis and characterization of conducting polymer composite (PAn/TiO2) for cathode material in rechargeable battery. Matérials Lett 57(9–10):1642–164810.1016/S0167-577X(02)01045-5 ↗
43. Zhou H, Wang X, Yu K, Zhang C, Li H, Du Z (2014) Preparation of multi-walled carbon nanotube/polyaniline/Fe3O4 composites. Integr Ferroelectr 154(1):159–16510.1080/10584587.2014.904706 ↗
44. Bandgar D, Navale S, Nalage S, Mane R, Stadler F, Aswal D, Gupta S, Patil V (2015) Simple and low-temperature polyaniline-based flexible ammonia sensor: a step towards laboratory synthesis to economical device design. J Mater Chem C 3(36):9461–946810.1039/C5TC01483B ↗
45. Lin L, Xu X, Chu C, Majeed MK, Yang J (2016) Mesoporous amorphous silicon: a simple synthesis of a high-rate and long‐life anode material for lithium‐ion batteries. Angew Chem 128(45):14269–1427210.1002/ange.201608146 ↗
46. Du X, Xu Y, Xiong L, Bai Y, Zhu J, Mao S (2014) Polyaniline with high crystallinity degree: synthesis, structure, and electrochemical properties. J Appl Polym Sci 131(19)10.1002/app.40827 ↗
47. Boey F, Lee T, Khor K (1995) Polymer crystallinity and its effect on the non-linear bending creep rate for a polyphenylene sulphide thermoplastic composite. Polym Test 14(5):425–43810.1016/0142-9418(95)00001-9 ↗
48. Tauc J (1968) Optical properties and electronic structure of amorphous Ge and Si. Mater Res Bull 3(1):37–4610.1016/0025-5408(68)90023-8 ↗
49. Siwatch P, Sharma K, Tripathi S (2020) Facile synthesis of NiCo2O4 quantum dots for asymmetric supercapacitor. Electrochim Acta 329:13508410.1016/j.electacta.2019.135084 ↗
50. Depauw V, Trompoukis C, Massiot I, Chen W, Dmitriev A, i Cabarrocas PR, Gordon I, Poortmans J (2017) Sunlight-thin nanophotonic monocrystalline silicon solar cells. Nano Futures 1(2):02100110.1088/2399-1984/aa7d7c ↗
51. Segets D, Lucas JM, Klupp Taylor RN, Scheele M, Zheng H, Alivisatos AP, Peukert W (2012) Determination of the quantum dot band gap dependence on particle size from optical absorbance and transmission electron microscopy measurements. Acs Nano 6(10):9021–903210.1021/nn303130d ↗
52. Gokulnath T, Choi J, Park H-Y, Sung K, Do Y, Park H, Kim J, Reddy SS, Kim J, Song M (2021) A wide-bandgap π-conjugated polymer for high-performance ternary organic solar cells with an efficiency of 17.40%. Nano Energy 89:10632310.1016/j.nanoen.2021.106323 ↗
53. Subramani T, Chen J, Sun Y-L, Jevasuwan W, Fukata N (2017) High-efficiency silicon hybrid solar cells employing nanocrystalline Si quantum dots and Si nanotips for energy management. Nano Energy 35:154–16010.1016/j.nanoen.2017.03.037 ↗
54. Zhang T, Iqbal S, Zhang X-Y, Wu W, Su D, Zhou H-L (2020) Recent advances in highly efficient organic-silicon hybrid solar cells. Sol Energy Mater Sol Cells 204:11024510.1016/j.solmat.2019.110245 ↗
55. Luque A, Hegedus S (2011) Handbook of photovoltaic science and engineering. Wiley, West Sussex
56. Wang B, Biesold GM, Zhang M, Lin Z (2021) Amorphous inorganic semiconductors for the development of solar cell, photoelectrocatalytic and photocatalytic applications. Chem Soc Rev 50(12):6914–694910.1039/D0CS01134G ↗
57. Li L-L, Chang Y-C, Wu H-P, Diau EW-G (2012) Characterisation of electron transport and charge recombination using temporally resolved and frequency-domain techniques for dye-sensitised solar cells. Int Rev Phys Chem 31(3):420–46710.1080/0144235X.2012.733539 ↗
58. Yadav P, Pandey K, Bhatt V, Kumar M, Kim J (2017) Critical aspects of impedance spectroscopy in silicon solar cell characterization: a review. Renew Sustain Energy Rev 76:1562–157810.1016/j.rser.2016.11.205 ↗
59. Estes M, Moddel G (1996) Luminescence from amorphous silicon nanostructures. Phys Rev B 54(20):1463310.1103/PhysRevB.54.14633 ↗
60. Günes S, Sariciftci NS (2008) Hybrid solar cells. Inorg Chim Acta 361(3):581–58810.1016/j.ica.2007.06.042 ↗
61. Kumar S, Nehra M, Deep A, Kedia D, Dilbaghi N, Kim K-H (2017) Quantum-sized nanomaterials for solar cell applications. Renew Sustain Energy Rev 73:821–83910.1016/j.rser.2017.01.172 ↗