journal article·2022-02

Dry Sliding Tribological Behavior of Brake Oil Conditioned Ceramic Matrix Composites Reinforced With Carbon Fabric

Parshant Kumar, Vijay Kumar Srivastava

Silicon· Volume 14· Issue 3
Publisher page

Abstract

Ceramic composites are extremely sensitive to the surrounding environment. Their tribological performance may degrade drastically if they are polluted by some external agent. The present article was aimed to investigate the unidirectional sliding characteristics of brake oil treated woven carbon-carbon (C/C), and carbon-carbon-silicon carbide (C/C-SiC) composites. The laminate orientation, surface conformity, normal load, and sliding velocity were varied. It was depicted that the quantity of oil absorbed by the composites depends on the laminate orientation. The decay rate in friction coefficient revealed that C/C composites are more prone to brake oil in comparison to C/C-SiC composites. The results showed that it is difficult to make an assumption regarding the wear and friction behavior of laminated composites in low conformity contacts concerning normal load and sliding velocity. However, friction coefficient increased with increment in sliding velocity and normal load, for non-conformal Hertzian contacts. The generation of friction film was arduous in the presence of absorbed oil. SEM analysis of worn surfaces revealed different surface morphology for low, and non-conformal contacts which depicted distinct tribological mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Brake Systems and Friction Analysis · Electrical Contact Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Shirvanimoghaddam K, Khayyam H, Abdizadeh H, Karbalaei Akbari M, Pakseresht AH, Abdi F, Abbasi A, Naebe M (2016) Effect of B4C, TiB2 and ZrSiO4 ceramic particles on mechanical properties of aluminium matrix composites: Experimental investigation and predictive modelling. Ceram Int 42(5):6206–6220. https://doi.org/10.1016/j.ceramint.2015.12.18110.1016/j.ceramint.2015.12.181 ↗
2. Kumar R, Ul Haq MI, Raina A, Anand A (2019) Industrial applications of natural fibre-reinforced polymer composites – challenges and opportunities. Int J Sustain Eng 12(3):212–220. https://doi.org/10.1080/19397038.2018.153826710.1080/19397038.2018.1538267 ↗
3. Baba ZU, Shafi WK, Haq MIU, Raina A (2019) Towards sustainable automobiles-advancements and challenges. Prog Ind Ecol Int J 13(4):315–33110.1504/PIE.2019.102840 ↗
4. Singh H, Haq MIU, Raina A (2020) Dry sliding friction and wear behaviour of AA6082-TiB2 in situ composites. Silicon 12(6):1469–1479. https://doi.org/10.1007/s12633-019-00237-y10.1007/s12633-019-00237-y ↗
5. Singh J, Chauhan A (2016) Overview of wear performance of aluminium matrix composites reinforced with ceramic materials under the influence of controllable variables. Ceram Int 42(1):56–8110.1016/j.ceramint.2015.08.150 ↗
6. Cesar PF, Della Bona A, Scherrer SS, Tholey M, van Noort R, Vichi A, Kelly R, Lohbauer U (2017) ADM guidance—Ceramics: Fracture toughness testing and method selection. Dent Mater 33(6):575–58410.1016/j.dental.2017.03.006 ↗
7. Cai Y, Yin X, Fan S, Zhang L, Cheng L (2013) Tribological behavior of three-dimensional needled ceramic modified carbon/carbon composites in seawater conditions. Compos Sci Technol 87:50–57. https://doi.org/10.1016/j.compscitech.2013.07.02610.1016/j.compscitech.2013.07.026 ↗
8. Peng Cui ZC, Shujie, Li (2008) Rapid densification and properties of C/C brake discs. Acta Materiae Compositae Sinica 25:101–105
9. Kumar P, Srivastava VK (2016) Tribological behaviour of C/C–SiC composites—A review. J Adv Ceram 5(1):1–12. https://doi.org/10.1007/s40145-015-0171-z10.1007/s40145-015-0171-z ↗
10. Krenkel W, Heidenreich B, Renz R (2002) C/C-SiC composites for advanced friction systems. Adv Eng Mater 4(7):427–436. https://doi.org/10.1002/1527-2648(20020717)4:7<427::AID-ADEM427>3.0.CO;2-C10.1002/1527-2648(20020717)4:7<427::AID-ADEM427>3.0.CO;2-C ↗
11. Yu S, Zhang F, Xiong X, Li Y, Tang N, Koizumi Y, Chiba A (2013) Tribological properties of carbon/carbon composites with various pyrolytic carbon microstructures. Wear 304(1):103–108. https://doi.org/10.1016/j.wear.2013.04.03110.1016/j.wear.2013.04.031 ↗
12. Zhou X, Zhu D, Xie Q, Luo F, Zhou W (2012) Friction and wear properties of C/C–SiC braking composites. Ceram Int 38(3):2467–2473. https://doi.org/10.1016/j.ceramint.2011.11.01510.1016/j.ceramint.2011.11.015 ↗
13. Liao X, Li H, Xu W, Li K (2007) Study on the thermal expansion properties of C/C composites. J Mater Sci 42(10):3435–3439. https://doi.org/10.1007/s10853-006-1123-310.1007/s10853-006-1123-3 ↗
14. Chen JD, Chern Lin JH, Ju CP (1996) Effect of humidity on the tribological behavior of carbon-carbon composites. Wear 193(1):38–47. https://doi.org/10.1016/0043-1648(95)06667-510.1016/0043-1648(95)06667-5 ↗
15. Ozcan S, Filip P (2013) Wear of carbon fiber reinforced carbon matrix composites: Study of abrasive, oxidative wear and influence of humidity. Carbon 62:240–247. https://doi.org/10.1016/j.carbon.2013.05.06110.1016/j.carbon.2013.05.061 ↗
16. Gomes JR, Silva OM, Silva CM, Pardini LC, Silva RF (2001) The effect of sliding speed and temperature on the tribological behaviour of carbon–carbon composites. Wear 249(3):240–245. https://doi.org/10.1016/S0043-1648(01)00554-310.1016/S0043-1648(01)00554-3 ↗
17. Yen BK, Ishihara T, Yamamoto I (1997) Influence of environment and temperature on “dusting” wear transitions of carbon–carbon composites. J Mater Sci 32(3):681–686. https://doi.org/10.1023/a:101853981934610.1023/a:1018539819346 ↗
18. Srivastava VK (2011) Sliding behavior of C/C and C/C-SiC composites in acidic environment-against high chromium steel disc. Am J Mater Sci 1(2):103–107. https://doi.org/10.5923/j.materials.20110102.1710.5923/j.materials.20110102.17 ↗
19. Wen S, Li K, Song Q, Shan Y, Li Y, Li H, Ma H (2015) Enhancement of the oxidation resistance of C/C composites by depositing SiC nanowires onto carbon fibers by electrophoretic deposition. J Alloy Compd 618:336–342. https://doi.org/10.1016/j.jallcom.2014.08.20910.1016/j.jallcom.2014.08.209 ↗
20. Hokao M, Hironaka S, Suda Y, Yamamoto Y (2000) Friction and wear properties of graphite/glassy carbon composites. Wear 237(1):54–62. https://doi.org/10.1016/S0043-1648(99)00306-310.1016/S0043-1648(99)00306-3 ↗
21. Qu S, Gong Y, Yang Y, Wen X, Yin G (2019) Grinding characteristics and removal mechanisms of unidirectional carbon fibre reinforced silicon carbide ceramic matrix composites. Ceram Int 45(3):3059–3071. https://doi.org/10.1016/j.ceramint.2018.10.17810.1016/j.ceramint.2018.10.178 ↗
22. Longbiao L (2020) Time-dependent matrix fracture of carbon fiber-reinforced silicon carbide ceramic-matrix composites considering interface oxidation. Compos Interfaces 27(6):551–567. https://doi.org/10.1080/09276440.2019.166719410.1080/09276440.2019.1667194 ↗
23. Kumar P, Srivastava VK (2020) Tribological characterization of carbon/carbon – silicon carbide composites exposed to freezing conditions. Mater Today Proc 21:1031–1037. https://doi.org/10.1016/j.matpr.2020.01.00110.1016/j.matpr.2020.01.001 ↗
24. Lin B, Wei J, Sui T, Wang H (2020) Effects of the surface processing on the tribological performance of C/SiCs under dry friction. Sci Rep 10(1):5990. https://doi.org/10.1038/s41598-020-62914-y10.1038/s41598-020-62914-y ↗
25. Wang H, Zhu D, Wan F, Zhou W, Luo F (2014) Influence of the C/C preform density on tribological characteristics of C/C–SiC composites under different conditions. Ceram Int 40(10):16641–16646. https://doi.org/10.1016/j.ceramint.2014.08.02510.1016/j.ceramint.2014.08.025 ↗
26. Nirmal U, Yousif BF, Rilling D, Brevern PV (2010) Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites. Wear 268(11):1354–1370. https://doi.org/10.1016/j.wear.2010.02.00410.1016/j.wear.2010.02.004 ↗
27. Chin CW, Yousif BF (2009) Potential of kenaf fibres as reinforcement for tribological applications. Wear 267(9):1550–1557. https://doi.org/10.1016/j.wear.2009.06.00210.1016/j.wear.2009.06.002 ↗
28. Fan S, Yang C, He L, Deng J, Zhang L, Cheng L (2017) The effects of phosphate coating on friction performance of C/C and C/SiC brake materials. Tribol Int 114:337–348. https://doi.org/10.1016/j.triboint.2017.04.03510.1016/j.triboint.2017.04.035 ↗
29. Li Z, Xiao P, Xiong X, Huang B-y (2013) Preparation and tribological properties of C fibre reinforced C/SiC dual matrix composites fabrication by liquid silicon infiltration. Solid State Sci 16:6–12. https://doi.org/10.1016/j.solidstatesciences.2012.10.00710.1016/j.solidstatesciences.2012.10.007 ↗
30. Kumar P, Srivastava VK (2019) Reciprocating sliding tribology of brake oil treated carbon fiber reinforced ceramic matrix composites. Trans Nonferrous Metals Soc China 29(9):1903–1913. https://doi.org/10.1016/S1003-6326(19)65098-310.1016/S1003-6326(19)65098-3 ↗
31. Xu X, Fan S, Zhang L, Du Y, Cheng L (2014) Tribological behavior of three-dimensional needled carbon/silicon carbide and carbon/carbon brake pair. Tribol Int 77:7–14. https://doi.org/10.1016/j.triboint.2014.04.00810.1016/j.triboint.2014.04.008 ↗
32. Lewis R, Gallardo-Hernandez EA, Hilton T, Armitage T (2009) Effect of oil and water mixtures on adhesion in the wheel/rail contact. Proc Inst Mech Eng Part F J Rail Rapid Transit 223(3):275–28310.1243/09544097JRRT248 ↗
33. Bi Y, Luo R, Li J, Feng Z, Jin Z (2008) The effects of the hydraulic oil on mechanical and tribological properties of C/C composites. Mater Sci Eng A 483:274–276. https://doi.org/10.1016/j.msea.2006.12.15210.1016/j.msea.2006.12.152 ↗
34. Xue Q-J, Zhang Z-Z, Liu W-M, Shen W-C (1998) Friction and wear characteristics of fiber- and whisker-reinforced PTFE composites under oil lubricated conditions. J Appl Polym Sci 69(7):1393–1402. https://doi.org/10.1002/(SICI)1097-4628(19980815)69:7<1393::AID-APP14>3.0.CO;2-V10.1002/(SICI)1097-4628(19980815)69:7<1393::AID-APP14>3.0.CO;2-V ↗
35. Fan S, Zhang L, Cheng L, Tian G, Yang S (2010) Effect of braking pressure and braking speed on the tribological properties of C/SiC aircraft brake materials. Compos Sci Technol 70(6):959–965. https://doi.org/10.1016/j.compscitech.2010.02.01210.1016/j.compscitech.2010.02.012 ↗
36. Chen JD, Ju CP (1995) Effect of sliding speed on the tribological behavior of a PAN-pitch carbon-carbon composite. Mater Chem Phys 39(3):174–179. https://doi.org/10.1016/0254-0584(94)01427-I10.1016/0254-0584(94)01427-I ↗
37. Hironobu I, Ikeda K, Yamamoto T (2003) Mechanism of negative pressure generation in the sliding process of paper-based wet frictional material. SAE Technical Paper
38. Yamagata H (2005) The science and technology of materials in automotive engines. Elsevier, Amsterdam10.1533/9781845690854 ↗