journal article·2022-11

Studying the Role of Gelation Agents in Gelcasting Non-porous Si3N4 Bodies by Pressureless Sintering

Omid Sharifi, Siavash M. Alizadeh, Mohammad Golmohammad, Farhad Golestanifard

Silicon· Volume 14· Issue 16
Publisher page

Abstract

The monomer content in the gelcasting process affects the kinetics of cross-linking reactions which determines the quality of the gel network structure and the final properties of the material. The main purpose of this study was to optimize the monomer contents in the gelcasting process to achieve a dense Si3N4 body by using pressureless sintering. Si3N4 bodies with a relative density of 95.9 ± 0.5% and 605 ± 4 MPa flexural strength were successfully prepared by employing the gelcasting technique using high-solid load slurry of 76 wt%. Acrylamide (AM) and N, N′-methylenebisarylamide (MBAM) were adopted as the monomeric system. The quality of gel structures was characterized by measuring idle time, green flexural strength, and linear shrinkage. Phase composition and microstructure of sintered samples were identified using XRD and SEM analysis, respectively. The linear drying shrinkage and Idle time decreased by increasing the monomer content. However, flexural green strength did not monotonically change with monomer content. The slurry with a 6 wt% monomer and AM/MBAM ratio of 3 produced the optimized gel structure. Besides, it resulted in a higher amount of β-Si3N4 phase which gives better mechanical strength.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Riley FL (2000) Silicon nitride and related materials. J Am Ceram Soc 83(2):245–26510.1111/j.1151-2916.2000.tb01182.x ↗
2. Petzow G, Herrmann M (2002) Silicon Nitride Ceramics. In: Jansen M (ed) High Performance Non-Oxide Ceramics II. Springer, Berlin, pp 47–16710.1007/3-540-45623-6_2 ↗
3. Cao L, Wang Z, Yin Z, Liu K, Yuan J (2018) Investigation on mechanical properties and microstructure of silicon nitride ceramics fabricated by spark plasma sintering. Mater Sci Eng A 731:595–60210.1016/j.msea.2018.06.093 ↗
4. Li Y, Chen F, Li L, Zhang W, Yu H, Shan Y, Shen Q, Jiang H (2010) Gas pressure sintering of arbitrary porous silicon nitride ceramics with high mechanical strength. J Am Ceram Soc 93(6):1565–156810.1111/j.1551-2916.2010.03603.x ↗
5. Li JL, Chen F, Niu JY (2011) Low temperature sintering of Si3N4 ceramics by spark plasma sintering technique. Adv Appl Ceram 110(1):20–2410.1179/174367510X12753884125406 ↗
6. Bocanegra-Bernal MH, Matovic B (2010) Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures. Mater Sci Eng A 527(6):1314–133810.1016/j.msea.2009.09.064 ↗
7. Klemm H (2010) Silicon nitride for high-temperature applications. J Am Ceram Soc 93(6):1501–152210.1111/j.1551-2916.2010.03839.x ↗
8. Pollinger JP (ed.) (1995) Improved Silicon Nitride Materials and Component Fabrication Processes for Aerospace and Industrial Gas Turbine Applications. ASME 1995 International Gas Turbine and Aeroengine Congress and Exposition; V005T13A00410.1115/95-GT-159 ↗
9. Okada A (2009) Ceramic technologies for automotive industry: Current status and perspectives. Mater Sci Eng B 161(1):182–18710.1016/j.mseb.2008.11.017 ↗
10. Drouet C, Leriche A, Hampshire S, Kashani M, Stamboulis A, Iafisco M et al (2017) 2 - Types of ceramics: Material class. In: Palmero P, Cambier F, De Barra E (eds) Advances in Ceramic Biomaterials. Woodhead Publishing, pp 21–8210.1016/B978-0-08-100881-2.00002-6 ↗
11. Mazzocchi M, Bellosi A (2008) On the possibility of silicon nitride as a ceramic for structural orthopaedic implants. Part I: processing, microstructure, mechanical properties. Cytotoxicity 19(8):2881–2887
12. Li J-Q, Luo F, Zhu D-M, Zhou W-C (2006) Preparation and dielectric properties of porous silicon nitride ceramics. Trans Nonferrous Metals Soc China 16:s487–s4s910.1016/S1003-6326(06)60240-9 ↗
13. Omatete OO (1991) Gelcasting-a new ceramic forming process. Am Ceram Soc Bull 70:1641
14. Bocanegra-Bernal MH, Matovic B (2009) Dense and near-net-shape fabrication of Si3N4 ceramics. Mater Sci Eng A 500(1):130–14910.1016/j.msea.2008.09.015 ↗
15. Yin S, Jiang S, Pan L, Guo L, Zhang Z, Zhang J et al (2019) Effects of solid loading and calcination temperature on microstructure and properties of porous Si3N4 ceramics by aqueous gelcasting using DMAA system. Ceram Int 45(16):19925–1993310.1016/j.ceramint.2019.06.250 ↗
16. Liu P-F, Li Z, Xiao P, Liu Y, Liu Z-Y, Luo H et al (2018) Effect of the molecular weight and concentration of PEG solution on microstructure and mechanical properties of Si3N4 ceramics fabricated by gel-casting. Ceram Int 44(8):8800–880810.1016/j.ceramint.2018.02.051 ↗
17. Parsi A, Golestani-Fard F, Mirkazemi SM (2019) The effect of gelcasting parameters on microstructural optimization of porous Si3N4 ceramics. Ceram Int 45(8):9719–972510.1016/j.ceramint.2019.01.222 ↗
18. Kastyl J, Chlup Z, Stastny P, Trunec M (2020) Machinability and properties of zirconia ceramics prepared by gelcasting method. Adv Appl Ceram 119(5-6):252–6010.1080/17436753.2019.1675402 ↗
19. Li L, Wang H, Su S (2015) Porous Si3N4 Ceramics Prepared by TBA-based Gel-casting. J Mater Sci Technol 31(3):295–29910.1016/j.jmst.2014.01.016 ↗
20. Vandeperre L, De Wilde A, Luyten J (2003) Gelatin gelcasting of ceramic components. J Mater Process Technol 135(2–3):312–31610.1016/S0924-0136(02)00862-2 ↗
21. Colonetti VC, Sanches MF, de Souza VC, Fernandes CP, Hotza D, Quadri MGN (2018) Cellular ceramics obtained by a combination of direct foaming of soybean oil emulsified alumina suspensions with gel consolidation using gelatin. Ceram Int 44(2):2436–244510.1016/j.ceramint.2017.10.215 ↗
22. Adolfsson E (2006) Gelcasting of zirconia using agarose. J Am Ceram Soc 89(6):1897–190210.1111/j.1551-2916.2006.01040.x ↗
23. Ewais EMM, Ahmed YMZ (2002) Consolidation of silicon carbide in aqueous medium based on gelation of agarose. Br Ceram Trans 101(6):255–25810.1179/096797802225008050 ↗
24. Jia Y, Kanno Y, Xie Z-P (2002) New gel-casting process for alumina ceramics based on gelation of alginate. J Eur Ceram Soc 22(12):1911–191610.1016/S0955-2219(01)00513-1 ↗
25. Olhero SM, Tari G, Coimbra MA, Ferreira JMF (2000) Synergy of polysaccharide mixtures in gelcasting of alumina. J Eur Ceram Soc 20(4):423–42910.1016/S0955-2219(99)00182-X ↗
26. Khanghah NS, Sani MAF (2010) Idle Time and Gelation Behavior in Gelcasting Process of PSZ in Acrylamide System. In: Zuhair A. Munir TO, Yuji Hotta, Mrityunjay Singh, editor. Innovative Processing and Manufacturing of Advanced Ceramics and Composites. 1st Edition ed: Wiley-American Ceramic Society; p. 105-1310.1002/9780470880456.ch10 ↗
27. Montanaro L, Coppola B, Palmero P, Tulliani J-M (2019) A review on aqueous gelcasting: A versatile and low-toxic technique to shape ceramics. Ceram Int 45(7 Part B):9653–967310.1016/j.ceramint.2018.12.079 ↗
28. Millán AJ, Moreno R, Nieto MAI (2002) Thermogelling polysaccharides for aqueous gelcasting—part I: a comparative study of gelling additives. J Eur Ceram Soc 22(13):2209–221510.1016/S0955-2219(01)00532-5 ↗
29. Ortega FS, Valenzuela FAO, Scuracchio CH, Pandolfelli VC (2003) Alternative gelling agents for the gelcasting of ceramic foams. J Eur Ceram Soc 23(1):75–8010.1016/S0955-2219(02)00075-4 ↗
30. Yu J, Wang H, Zeng H, Zhang J (2009) Effect of monomer content on physical properties of silicon nitride ceramic green body prepared by gelcasting. Ceram Int 35(3):1039–104410.1016/j.ceramint.2008.04.021 ↗
31. Yu J, Wang H, Zhang J, Zhang D, Yan Y (2010) Gelcasting preparation of porous silicon nitride ceramics by adjusting the content of monomers. J Sol-Gel Sci Technol 53(3):515–52310.1007/s10971-009-2125-9 ↗
32. Huang Y, Yang J (2010) The Gel-Casting of Non-Oxide Ceramics. In: Huang Y, Yang J (eds) Novel Colloidal Forming of Ceramics. Springer, Berlin, pp 211–28210.1007/978-3-642-12281-1_5 ↗
33. Lin X, Shi J, Gong H, Zhang Y, Feng Y, Guo X et al (2018) Preparation and Properties of Pressureless-Sintered Porous Si3N4 Ceramics. Advanced Functional Materials. Springer, Singapore
34. Wang H, Yu J, Zhang J, Zhang D (2010) Preparation and properties of pressureless-sintered porous Si3N4. J Mater Sci 45(13):3671–367610.1007/s10853-010-4412-9 ↗
35. Kawai C, Yamakawa A (1997) Effect of porosity and microstructure on the strength of Si3N4: designed microstructure for high strength, high thermal shock resistance, and facile machining. J Am Ceram Soc 80(10):2705–270810.1111/j.1151-2916.1997.tb03179.x ↗
36. Xuejian L, Liping H, Xin X, Xiren F, Hongchen G (2000) Optimizing the rheological behavior of silicon nitride aqueous suspensions. Ceram Int 26(3):337–34010.1016/S0272-8842(99)00060-7 ↗
37. Gu YP (2015) Encyclopedia of Surface and Colloid Science3rd edn. CRC Press 9781351252386
38. Zeng W, Gan X, Li Z, Zhou K (2016) The preparation of silicon nitride ceramics by gelcasting and pressureless sintering. Ceram Int 42(10):11593–1159710.1016/j.ceramint.2016.04.040 ↗
39. Janney M, Nunn S, Walls C, Omatete O, Ogle R, Kirby G et al (1998). Gelcasting:1–15
40. Yang Z, Yu J, Li C, Zhong Y, Deng K, Ren Z, Wang Q, Dai Y, Wang H (2016) Effect of β-Si3N4 initial powder size on texture development of porous Si3N4 ceramics prepared by gel-casting in a magnetic field. Trans Indian Ceram Soc 75(4):256–26210.1080/0371750X.2016.1202143 ↗
41. Wan T, Yao D, Yin J, Xia Y, Zuo K, Zeng Y (2015) The microstructure and mechanical properties of porous silicon nitride ceramics prepared via novel aqueous Gelcasting. Int J Appl Ceram Technol 12(5):932–93810.1111/ijac.12424 ↗
42. Yang X, Li B, Zhang C, Wang S, Liu K, Zou C (2016) Fabrication and properties of porous silicon nitride wave-transparent ceramics via gel-casting and pressureless sintering. Mater Sci Eng A 663:174–18010.1016/j.msea.2016.03.116 ↗
43. Bressiani JC, Izhevskyi V, Bressiani AH (1999) Development of the microstructure of the silicon nitride based ceramics. J Eur Ceram Soc 2(3):165–172