journal article·2026-06-16Open access

Mechanical characteristics of high-performance concretes with substitution of fine aggregate by waste material from CETRIS boards production.

Kateřina Matýsková, Marie Horňáková, Vlastimil Bílek, David Bujdoš

Cement Wapno Beton· Volume 30· Issue 5

Abstract

This paper discusses the possibility of replacing fine aggregates in high performance concrete [HPC] with waste material from CETRIS boards production [WCM]. CETRIS boards are made from a combination of fine wood chips and cement mortar, and a large amount of waste material is generated during their production - cutting and grinding of the boards. In this research, fine waste material from CETRIS boards was used as a potential replacement for fine aggregate in concrete. The high-performance concretes were designed with a maximum size of aggregates of 8 mm, water to binder ratio of 0.25 and 28-days compressive strength around 140 MPa. These types of concrete do not contain enough water for hydration of the cement, so an internal curing process carried out by pre-wetting aggregates can improve this situation. Influence of WCM substitution on workability, bending and compressive strength and modulus of elasticity of concrete are discussed in this paper. The frost resistance of concretes is discussed as well.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

VŠB — Technical University of Ostrava, 708 00 Ostrava-Poruba, Czech Republic

References

Reference metadata was not supplied for this record.