journal article·2017-04-01Open access

Thermal cure effects on electromechanical properties of conductive wires by direct ink write for 4D printing and soft machines

Quanyi Mu, Conner K Dunn, Lei Wang, Martin L Dunn, H Jerry Qi, Tiejun Wang

Smart Materials and Structures· Volume 26· Issue 4

Abstract

Abstract Recent developments in soft materials and 3D printing are promoting the rapid development of novel technologies and concepts, such as 4D printing and soft machines, that in turn require new methods for fabricating conductive materials. Despite the ubiquity of silver nanoparticles (NPs) in the conducting electrodes of printed electronic devices, their potential use in stretchable conductors has not been fully explored in 4D printing and soft machines. This paper studies the effect of thermal cure conditions on conductivity and electro-mechanical behaviors of silver ink by the direct ink write (DIW) printing approach. We found that the electro-mechanical properties of silver wires can be tailored by controlling cure time and cure temperature to achieve conductivity as well as stretchability. For the silver NP ink we used in the experiments, silver wires cured at 80 °C for 10–30 min have conductivity >1% bulk silver, Young’s modulus <100 MPa, yield strain ∼9%, and can retain conductivity up to 300% strain. In addition, under stress controlled cyclic loading/unloading conditions, the resistance of these wires is only about 1.3 times the initial value after the 100th repeat cycle (7.6% maximum strain in the first cycle). Silver wires cured at 120 °C for 10–20 min are more sensitive to strain and have a yield strain of around 6%. These properties indicate that the silver ink can be used to fabricate stretchable electrodes and flex sensors. Using the DIW fabrication method, we printed silver ink patterns on the surface of 3D printed polymer parts, with the future goal of constructing fully 3D printed arbitrarily formed soft and stretchable devices and of applying them to 4D printing. We demonstrated a fully printed functional soft-matter sensor and a circuit element that can be stretched by as much as 45%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Advanced Materials and Mechanics · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Xi'an Jiaotong University

The George W Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332,

Singapore University of Technology and Design

Renewable Bioproducts Institute, Georgia Institute of Technology, Atlanta, GA 30332,

Funding

National Science Foundation · Air Force Office of Scientific Research

References (46)

Show source-provided references
1. Active materials by four-dimension printing10.1063/1.4819837 ↗
2. Active origami by 4D printing10.1088/0964-1726/23/9/094007 ↗
3. Controlled sequential shape changing components by 3D printing of shape memory polymer multimaterials10.1016/j.piutam.2014.12.021 ↗
4. Sequential self-folding structures by 3D printed digital shape memory polymers10.1038/srep13616 ↗
5. 3D printed reversible shape changing components with stimuli responsive materials10.1038/srep24761 ↗
6. Multi-shape active composites by 3D printing of digital shape memory polymers10.1038/srep24224 ↗
7. Tibbits · 2014
8. Biomimetic 4D printing10.1038/nmat4544 ↗
9. Pattern transformation of heat-shrinkable polymer by three-dimensional (3D) printing technique10.1038/srep08936 ↗
10. 3D printing of shape memory polymers for flexible electronic devices10.1002/adma.201503132 ↗
11. Camouflage and display for soft machines10.1126/science.1222149 ↗
12. Materials and mechanics for stretchable electronics10.1126/science.1182383 ↗
13. A stretchable form of single-crystal silicon for high-performance electronics on rubber substrates10.1126/science.1121401 ↗
14. Buckling in serpentine microstructures and applications in elastomer-supported ultra-stretchable electronics with high areal coverage10.1039/c3sm51360b ↗
15. Metal/polymer based stretchable antenna for constant frequency far-field communication in wearable electronics10.1002/adfm.201503277 ↗
16. A rubberlike stretchable active matrix using elastic conductors10.1126/science.1160309 ↗
17. Mechanical versus electrical hysteresis of carbon nanotube/styrene-butadiene-styrene composites and their influence in the electromechanical response10.1016/j.compscitech.2015.01.006 ↗
18. Transparent and stretchable high-performance supercapacitors based on wrinkled graphene electrodes10.1021/nn405939w ↗
19. Experimental investigation of the electromechanical phase transition in a dielectric elastomer tube10.1088/0964-1726/24/3/035006 ↗
20. Highly conductive and transparent PEDOT: PSS films with a fluorosurfactant for stretchable and flexible transparent electrodes10.1002/adfm.201101775 ↗
21. Large increase in stretchability of organic electronic materials by encapsulation10.1016/j.eml.2016.03.012 ↗
22. Stretchable, transparent, ionic conductors10.1126/science.1240228 ↗
23. Intrinsically stretchable transparent electrodes based on silver-nanowire-crosslinked-polyacrylate composites10.1088/0957-4484/23/34/344002 ↗
24. A water-based silver-nanowire screen-print ink for the fabrication of stretchable conductors and wearable thin-film transistors10.1002/adma.201600772 ↗
25. Roll-to-roll compatible sintering of inkjet printed features by photonic and microwave exposure: from non-conductive ink to 40% bulk silver conductivity in less than 15 s10.1002/adma.201104417 ↗
26. Photonic flash sintering of silver nanoparticle inks: a fast and convenient method for the preparation of highly conductive structures on foil10.1557/mrc.2012.28 ↗
27. Thermal conductivity estimation of inkjet-printed silver nanoparticle ink during continuous wave laser sintering10.1016/j.ijheatmasstransfer.2015.01.056 ↗
28. Room-temperature chemical welding and sintering of metallic nanostructures by capillary condensation10.1021/acs.nanolett.6b00621 ↗
29. Silver nanowires transparent conductive films: fabrication using different sintering techniques10.1109/NANO.2013.6720806 ↗
30. Room-temperature nanosoldering of a very long metal nanowire network by conducting-polymer-assisted joining for a flexible touch-panel application10.1002/adfm.201203802 ↗
31. Effect of microstructural development on mechanical and electrical properties of inkjet-printed Ag films10.1007/s11664-008-0552-y ↗
32. Tensile characteristics of metal nanoparticle films on flexible polymer substrates for printed electronics applications10.1088/0957-4484/24/8/085701 ↗
33. The characterization of electrically conductive silver ink patterns on flexible substrates10.1016/j.microrel.2009.04.004 ↗
34. Highly conductive ink jet printed films of nanosilver particles for printable electronics10.1149/1.2073670 ↗
35. Temperature dependence of the electrical conductivity of activated carbons prepared from vine shoots by physical and chemical activation methods10.1016/j.micromeso.2014.07.023 ↗
36. Free-volume model for ionic conductivity in polymers10.1063/1.1662158 ↗
37. Tensile testing of free-standing Cu, Ag and Al thin films and Ag/Cu multilayers10.1016/S1359-6454(00)00128-2 ↗
38. Mechanisms of reversible stretchability of thin metal films on elastomeric substrates10.1063/1.2201874 ↗
39. Metal films on polymer substrates stretched beyond 50%10.1063/1.2817234 ↗
40. Stretchability of thin metal films on elastomer substrates10.1063/1.1806275 ↗
41. Analysis of electrically conductive silver ink on stretchable substrates under tensile load10.1016/j.microrel.2010.06.011 ↗
42. Embedded 3D printing of strain sensors within highly stretchable elastomers10.1002/adma.201400334 ↗
43. Detailed investigation on elastoplastic deformation and failure of carbon nanotube fibers by monotonic and cyclic tensile experiments10.1016/j.carbon.2015.06.035 ↗
44. Mechanical properties of shape memory polymer of polyurethane series: basic characteristics of stress–strain–temperature relationship
45. Critical role of Diels-Adler adducts to realise stretchable transparent electrodes based on silver nanowires and silicone elastomer10.1038/srep25358 ↗
46. Poisson’s ratio values for rocks10.1016/j.ijrmms.2006.04.011 ↗