journal article·2025-03-01

Enhancing the electroactive β-phase of PVDF filaments via feedstock processing

Fawad Ali, Imran Parvez, Mohammad Albakri

Smart Materials and Structures· Volume 34· Issue 3
Publisher page

Abstract

Abstract Polyvinylidene fluoride (PVDF) is a smart piezoelectric material with remarkable properties, offering vast potential for applications in areas such as energy harvesting, biomedical devices, and sensors. Among its various crystalline phases, the β-phase is the most electroactive, characterized by high dielectric properties. Recently, PVDF has been processed using 3D printing due to the technology’s ability to fabricate complex and intricate structures, along with advantages such as design flexibility, material efficiency, and rapid prototyping. While the β-phase content in PVDF is often enhanced through additives or post-processing, limited attention has been given to the role of feedstock preparation and extrusion parameters in phase enhancement. In this study, we investigated how feedstock preparation and extrusion parameters influence the β-phase content of PVDF, aiming to optimize its piezoelectric properties for 3D printing applications. PVDF filaments were produced using two different methods: direct extrusion from PVDF pellets and a solution-based process involving dissolution in a solvent, followed by extrusion. Phase content, structural changes, and thermal stability were assessed using x-ray diffraction (XRD), Fourier-transform infrared spectroscopy, and differential scanning calorimetry. Results show that feedstock processing conditions significantly impact the crystallinity and β-phase concentration in PVDF filaments. Notably, solution-processed PVDF exhibited a higher β-phase concentration compared to the pellet-based method, suggesting that this approach may enhance piezoelectric performance. This study highlights the importance of feedstock processing techniques as a means of tailoring the electroactive properties of PVDF for advanced 3D-printed applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Advanced Materials and Mechanics · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Piezoelectricity in polyvinylidenefluoride10.1121/1.387225 ↗
2. Printable smart materials and devices: strategies and applications10.1021/acs.chemrev.1c00303 ↗
3. Intelligent and smart biomaterials for sustainable 3D printing applications10.1016/j.cobme.2023.100450 ↗
4. Progress in the applications of smart piezoelectric materials for medical devices10.3390/polym12112754 ↗
5. 3D printed polymer piezoelectric materials: transforming healthcare through biomedical applications10.3390/polym15234470 ↗
6. Actuator materials: review on recent advances and future outlook for smart textiles10.3390/fib7030021 ↗
7. Moisture sensitive smart yarns and textiles from self‐balanced silk fiber muscles10.1002/adfm.201808241 ↗
8. Effect of casting solvent on the structure development, electrical, thermal behavior of polyvinylidene fluoride (PVDF)–carbon nanofiber (CNF) conducting binary and hybrid nanocomposites10.1007/s00289-020-03176-6 ↗
9. One-step multipurpose surface functionalization by adhesive catecholamine10.1002/adfm.201200177 ↗
10. Recent advances in flexible PVDF based piezoelectric polymer devices for energy harvesting applications10.1177/1045389X20966058 ↗
11. Enhanced piezoelectric energy harvester by employing freestanding single‐crystal BaTiO3 films in PVDF‐TrFE based composites10.1002/adfm.202316519 ↗
12. 3D-printable PLA/Mg composite filaments for potential bone tissue engineering applications10.3390/polym15112572 ↗
13. Composite modeling and analysis for fabrication of FDM prototypes with locally controlled properties10.1016/S1526-6125(02)70139-4 ↗
14. Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties10.1016/j.addma.2021.102518 ↗
15. Boosting piezoelectricity by 3D printing PVDF‐MoS2 composite as a conformal and high‐sensitivity piezoelectric sensor10.1002/adfm.202302946 ↗
16. Enhanced electroactive β phase in three phase PVDF/CaCO3/nanoclay composites: effect of micro‐CaCO3 and uniaxial stretching10.1002/app.44940 ↗
17. Integrated 3D printing and corona poling process of PVDF piezoelectric films for pressure sensor application10.1088/1361-665X/aa738e ↗
18. Smart material optimization: exploring the influence of experimental parameters on PVDF crystalline structure10.1115/SMASIS2024-140347 ↗
19. Study on the effect of stretching behavior on the properties of PVDF films and mechanism10.1016/j.polymer.2024.126884 ↗
20. Comparative study of PVDF sheets and their sensitivity to mechanical vibrations: the role of dimensions, molecular weight, stretching and poling10.3390/nano11071637 ↗
21. β phase optimization of solvent cast PVDF as a function of the processing method and additive content10.1021/acsomega.4c01221 ↗
22. Effect of thermal processing conditions on the structure and dielectric properties of PVDF films10.1007/s10965-014-0587-0 ↗
23. Pure β -phase formation in polyvinylidene fluoride (PVDF)-carbon nanotube composites10.1088/1361-6463/aa5f85 ↗
24. Graphene-metal oxide nanoparticles on piezoelectric and pyroelectric effect of polyvinylidene fluoride (PVDF)10.1007/978-3-030-40513-7_34 ↗
25. Current and future applications of PVDF-carbon nanomaterials in energy and sensing10.1016/j.cej.2024.151856 ↗
26. Significant enhancement of the electroactive β-phase of PVDF by incorporating hydrothermally synthesized copper oxide nanoparticles10.1039/C5RA21903E ↗
27. Morphology and polymorph study of a polyvinylidene fluoride (PVDF) membrane for protein binding: effect of the dissolving temperature10.1016/j.desal.2011.05.046 ↗
28. The effect of dielectric heterogeneity on the pyroelectric response of PVDF10.1109/94.660762 ↗
29. FTIR and DSC studies of mechanically deformed β-PVDF films10.1081/MB-100106174 ↗
30. FTIR‐ATR studies of drawing and poling in polymer bilaminate films10.1002/polb.1994.090321213 ↗
31. Effect of crystallization temperature on the crystalline phase content and morphology of poly(vinylidene fluoride)10.1002/polb.1994.090320509 ↗
32. Preparation of PVDF flexible piezoelectric film with high β-phase content by matching solvent dipole moment and crystallization temperature10.1007/s10854-019-02400-y ↗
33. Achieving very high fraction of β-crystal PVDF and PVDF/CNF composites and their effect on AC conductivity and microstructure through a stretching process10.1016/j.eurpolymj.2010.09.003 ↗