journal article·2017-10-01Open access

Temperature measurement and damage detection in concrete beams exposed to fire using PPP-BOTDA based fiber optic sensors

Yi Bao, Matthew S Hoehler, Christopher M Smith, Matthew Bundy, Genda Chen

Smart Materials and Structures· Volume 26· Issue 10

Abstract

Abstract In this study, Brillouin scattering-based distributed fiber optic sensor is implemented to measure temperature distributions and detect cracks in concrete structures subjected to fire for the first time. A telecommunication-grade optical fiber is characterized as a high temperature sensor with pulse pre-pump Brillouin optical time domain analysis (PPP-BODTA), and implemented to measure spatially-distributed temperatures in reinforced concrete beams in fire. Four beams were tested to failure in a natural gas fueled compartment fire, each instrumented with one fused silica, single-mode optical fiber as a distributed sensor and four thermocouples. Prior to concrete cracking, the distributed temperature was validated at locations of the thermocouples by a relative difference of less than 9%. The cracks in concrete can be identified as sharp peaks in the temperature distribution since the cracks are locally filled with hot air. Concrete cracking did not affect the sensitivity of the distributed sensor but concrete spalling broke the optical fiber loop required for PPP-BOTDA measurements.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Fiber Optic Sensors · Advanced Fiber Laser Technologies · Advanced Photonic Communication Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Missouri University of Science and Technology

National Institute of Standards and Technology

Funding

National Institute of Standards and Technology

References (37)

Show source-provided references
1. Effect of temperature on thermal properties of high-strength concrete10.1061/(ASCE)0899-1561(2003)15:2(101) ↗
2. Macroscopic FE model for tracing the fire response of reinforced concrete structures10.1016/j.engstruct.2009.05.018 ↗
3. Fundamental principles of structural behavior under thermal effects10.1016/S0379-7112(01)00037-6 ↗
4. An efficient fiber element approach for the thermo-structural simulation of non-uniformly heated frames10.1016/j.firesaf.2012.02.002 ↗
5. Impact of electromagnetic field upon temperature measurement of induction heated charges10.1007/s10765-013-1423-1 ↗
6. Miniaturized fiber inline Fabry–Perot interferometer fabricated with a femtosecond laser10.1364/OL.33.000536 ↗
7. Fabry–Perot optical fiber tip sensor for high temperature measurement10.1016/j.optcom.2010.05.037 ↗
8. Fiber Mach-Zehnder interferometer based on microcavities for high-temperature sensing with high sensitivity10.1364/OL.36.003753 ↗
9. Gas temperature measurements using fibre Bragg grating during fire experiments in a tunnel10.1016/j.firesaf.2007.06.001 ↗
10. Optical fiber sensors embedded in concrete for measurement of temperature in a real fire test10.1117/1.3658760 ↗
11. A temperature self-compensated LPFG sensor for large strain measurements at high temperature10.1109/TIM.2010.2047065 ↗
12. Large-strain optical fiber sensing and real-time FEM updating of steel structures under high temperature effect10.1088/0964-1726/22/1/015016 ↗
13. Temperature characterization of long period gratings written in three different types of optical fibre for potential high temperature measurements10.1016/j.sna.2010.03.016 ↗
14. High-temperature fibre Bragg grating thermometer10.1049/el:20020662 ↗
15. New fiber optic sensor for monitoring temperatures in concrete structures during fires10.1016/j.sna.2016.12.013 ↗
16. Original interrogation system for quasi-distributed FBG-based temperature sensor with fast demodulation technique10.1016/j.sna.2008.11.018 ↗
17. High-resolution single-mode fiber-optic distributed Raman sensor for absolute temperature measurement using superconducting nanowire single-photon detectors10.1063/1.3656702 ↗
18. Recent progress in distributed fiber optic sensors10.3390/s120708601 ↗
19. Extreme temperature sensing using Brillouin scattering in optical fibers
20. Distributed pressure and temperature sensing based on stimulated Brillouin scattering
21. Pulse pre-pump-BOTDA technology for new generation of distributed strain measuring system
22. Kilometer-long optical fiber sensor for real-time railroad infrastructure monitoring to ensure safe train operation10.1115/JRC2015-5653 ↗
23. Measuring mortar shrinkage and cracking by pulse pre-pump Brillouin optical time domain analysis with a single optical fiber10.1016/j.matlet.2015.01.140 ↗
24. Concrete pavement monitoring with PPP-BOTDA distributed strain and crack sensors10.12989/sss.2016.18.3.405 ↗
25. Strain distribution and crack detection in thin unbonded concrete pavement overlays with fully distributed fiber optic sensors10.1117/1.OE.55.1.011008 ↗
26. Distributed fiber optic sensor-enhanced detection and prediction of shrinkage-induced delamination of ultra-high-performance concrete bonded over an existing concrete substrate10.1088/1361-665X/aa71f4 ↗
27. Fully-distributed fiber optic sensor for strain measurement at high temperature10.12783/SHM2015/358 ↗
28. Temperature-dependent strain and temperature sensitivities of fused silica single mode fiber sensors with pulse pre-pump Brillouin optical time domain analysis10.1088/0957-0233/27/6/065101 ↗
29. Experimental analysis of steel beams subjected to fire conditions enhanced by Brillouin scattering based fiber optic sensor data10.1061/(ASCE)ST.1943-541X.0001617 ↗
30. High temperature measurement with Brillouin optical time domain analysis10.1364/OL.41.003177 ↗
31. Measurements of heat and combustion products in reduced-scale ventilation-limited compartment fires
32. Novel applications of pulse pre-pump Brillouin optical time domain analysis for Behavior evaluation of structures under thermal and mechanical loading
33. Effect of fire induced spalling on the response of reinforced concrete beams10.4334/IJCSM.2008.2.2.071 ↗
34. An experimental method for assessing the spalling sensitivity of concrete mixture submitted to high temperature10.1016/j.cemconcomp.2012.04.002 ↗
35. A meso-level investigation into the explosive spalling mechanism of high-performance concrete under fire exposure10.1016/j.cemconres.2014.07.010 ↗
36. Bond strength of steel bars embedded in high-performance fiber-reinforced cementitious composite before and after exposure to elevated temperatures10.1016/j.firesaf.2017.06.006 ↗
37. Thermal and mechanical properties of green engineered cementitious composites after exposure to high temperatures10.1016/j.conbuildmat.2017.09.125 ↗