journal article·2017-03-01

Degradation of bimorph piezoelectric bending beams in energy harvesting applications

P Pillatsch, B L Xiao, N Shashoua, H M Gramling, E M Yeatman, P K Wright

Smart Materials and Structures· Volume 26· Issue 3
Publisher page

Abstract

Abstract Piezoelectric energy harvesting is an attractive alternative to battery powering for wireless sensor networks. However, in order for it to be a viable long term solution the fatigue life needs to be assessed. Many vibration harvesting devices employ bimorph piezoelectric bending beams as transduction elements to convert mechanical to electrical energy. This paper introduces two degradation studies performed under symmetrical and asymmetrical sinusoidal loading. It is shown that besides a loss in output power, the most dramatic effect of degradation is a shift in resonance frequency which is highly detrimental to resonant harvester designs. In addition, micro-cracking was shown to occur predominantly in piezoelectric layers under tensile stress. This opens the opportunity for increased life time through compressive operation or pre-loading of piezoceramic layers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative Energy Harvesting Technologies · Advanced Sensor and Energy Harvesting Materials · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of California-Berkeley

Department of Electrical and Electronic Engineering

Funding

Fonds National de la Recherche Luxembourg

References (46)

Show source-provided references
1. Architectures for vibration-driven micropower generators10.1109/JMEMS.2004.830151 ↗
2. Energy harvesting from human and machine motion for wireless electronic devices10.1109/JPROC.2008.927494 ↗
3. Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems10.1088/0964-1726/17/4/043001 ↗
4. Piezoelectric MEMS for energy harvesting10.1557/mrs.2012.275 ↗
5. Electrical fatigue behaviour in lead zirconate titanate: an experimental and theoretical study10.1088/0964-1726/22/8/085032 ↗
6. Opto-numerical analysis of AlN piezoelectric thin film operating as an actuation layer in MEMS cantilevers
7. Piezoelectric multilayer actuator life test10.1109/TUFFC.2011.1874 ↗
8. Piezoelectric stack actuator life test10.1109/AERO.2011.5747384 ↗
9. Characterization of different beam shapes for piezoelectric energy harvesting10.1088/0960-1317/18/10/104013 ↗
10. Effect of length/width ratio of tapered beams on the performance of piezoelectric energy harvesters10.1088/0964-1726/22/7/075015 ↗
11. Powering a wireless sensor node with a vibration-driven piezoelectric energy harvester10.1088/0964-1726/20/12/125006 ↗
12. A bimorph multi-layer piezoelectric vibration energy harvester
13. Improving output power of piezoelectric energy harvesters using multilayer structures10.1016/j.proeng.2011.12.049 ↗
14. Energy harvesting using a PZT ceramic multilayer stack10.1088/0964-1726/22/6/065015 ↗
15. Fatigue evaluation of piezo impact drive mechanism10.1109/MHS.2007.4420862 ↗
16. Fatigue of piezoelectric beams used in vibration energy harvesting
17. Zickgraf · 1991 · 325
18. Limitation of the degradation effect in piezoelectric multilayer actuators with ceramic layer thickness below 50 µm
19. Effects of high static stress on the piezoelectric properties of transducer materials10.1121/1.1908435 ↗
20. Domain processes in lead titanate zirconate and barium titanate ceramics10.1063/1.1735059 ↗
21. Domain switch toughening in polycrystalline ferroelectrics10.1557/jmr.2006.0002 ↗
22. Critical role of domain switching on the fracture toughness of poled ferroelectrics10.1016/S0020-7683(00)00162-1 ↗
23. Fracture mechanisms in ferroelectric-ferroelastic lead zirconate titanate (Zr: Ti = 0.54: 0.46) Ceramics10.1111/j.1151-2916.1990.tb06554.x ↗
25. Fatigue in bulk lead zirconate titanate actuator materials10.1002/adem.200500117 ↗
27. Piezoelectric properties of PZT thin films on metallic substrates10.1080/00150190008224989 ↗
28. Influence of cyclic mechanical and electrical load on the properties of PZT(53/47) films on metallic substrates10.1109/ISAF.2000.942462 ↗
29. Iterative method for accurate determination of the real and imaginary parts of the materials coefficients of piezoelectric ceramics10.1109/T-SU.1976.30898 ↗
30. Ferroelectric hysteresis measurement & analysis
31. Experimental measurement methods for the evaluation of degradation in piezoelectric ceramics
32. Piezoelectric fatigue testing machines and devices10.1016/j.ijfatigue.2005.09.020 ↗
33. Development of a three-point bending fatigue testing methodology at 20 kHz frequency10.1016/j.ijfatigue.2007.03.018 ↗
34. In situ measurement of material properties of lead zirconate titanate piezoelectric ceramics during cyclic mechanical loading10.1016/j.jeurceramsoc.2009.11.004 ↗
35. New capabilities to support industry through characterisation of MEMS-scale piezoelectric materials (webinar)
36. Electromechanical properties of lead zirconate titanate piezoceramics under the influence of mechanical stresses10.1109/58.808876 ↗
37. Time dependent behaviour of piezo-electric materials
38. Temperature dependence of the fatigue and mechanical properties of lead zirconate titanate piezoelectric ceramics10.1016/j.ijfatigue.2009.01.008 ↗
39. Empirical model for fatigue of PZT ferroelectric memories
40. Piezoelectric and mechanical properties of fatigue resistant, self-healing PZT-ionomer composites10.1088/0964-1726/23/5/055001 ↗
41. Degradation of piezoelectric materials
42. Degradation of piezoelectric materials for energy harvesting applications10.1088/1742-6596/557/1/012129 ↗
43. Magnetic plucking of piezoelectric beams for frequency up-converting energy harvesters10.1088/0964-1726/23/2/025009 ↗
44. A piezoelectric frequency up-converting energy harvester with rotating proof mass for human body applications10.1016/j.sna.2013.10.003 ↗
45. Experimental validation of a piezoelectric frequency up-converting rotational energy harvester
46. Pre-stressed curved actuators: characterization and modeling of their piezoelectric behavior10.1117/12.484749 ↗