Polycarbonate based multifunctional self-sensing 2D and 3D printed structures for aeronautic applications
Source abstract
Abstract
Abstract Different polycarbonate materials have been reinforced with carbon nanotubes to tune electrical conductivity and to induce piezoresistive self-sensing capabilities. Further, the composites were processed by solvent casting and fused deposition modelling (filament for 3D printing) methods. An electrical conductivity percolation threshold of ≈0.3 wt.% has been found for solvent casted films, whereas samples processed by 3D printing show higher thresholds, ≈2 wt.%, presenting all samples a similar maximum electrical conductivity ( σ ≈ 1 × 10 −3 S m −1 ), thermal and chemical properties. Overall mechanical properties are larger for the solvent cast films concerning the 3D printed ones, particularly the elongation at break. The piezoresistive sensitivity, obtained after four-point-bending and uniaxial strain experiments, shows gauge factors up to 1.7, independently of the processing method. The functionality of the materials has been demonstrated by the implementation of an airplane wing section model with self-sensing capabilities. Two implemented strategies showed the suitability of the developed materials for real-time monitoring of the wing mechanical deformation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Smart Materials for Construction · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Polymers for additive manufacturing and 4D-printing: materials, methodologies, and biomedical applications10.1016/j.progpolymsci.2019.03.001 ↗
2. Piezoresistive properties of resin reinforced with carbon nanotubes for health-monitoring of aircraft primary structures10.1016/j.compositesb.2016.09.061 ↗
3. 3D printing to enable multifunctionality in polymer-based composites: a review10.1016/j.compositesb.2019.107540 ↗
4. Advances in 3D printing of thermoplastic polymer composites and nanocomposites10.1016/j.progpolymsci.2019.101162 ↗
5. Fundamentals and applications of 3D printing for novel materials10.1016/j.apmt.2017.02.004 ↗
6. Highly sensitive wearable 3D piezoresistive pressure sensors based on graphene coated isotropic non-woven substrate10.1016/j.compositesa.2018.11.023 ↗
7. Creating 3D printed sensor systems with conductive composites10.1088/1361-665X/abcbe2 ↗
8. 3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling10.1016/j.apmt.2017.04.003 ↗
9. A review of multifunctional polymer-matrix structural composites10.1016/j.compositesb.2018.12.117 ↗
10. Progress on the morphological control of conductive network in conductive polymer composites and the use as electroactive multifunctional materials10.1016/j.progpolymsci.2013.07.007 ↗
11. Polymers in biosensor devices for cardiovascular applications10.1016/j.cobme.2019.10.002 ↗
12. Investigation the conductivity of carbon fiber composites focusing on measurement techniques under dynamic and static loads10.1016/j.jmrt.2019.08.019 ↗
13. Micromechanics modeling of the uniaxial strain-sensing property of carbon nanotube cement-matrix composites for SHM applications10.1016/j.compstruct.2016.12.014 ↗
14. Development of high sensitive polyaniline based piezoresistive films by conventional and green chemistry approaches10.1016/j.sna.2014.09.004 ↗
15. State-of-the-art and future challenges of UV curable polymer-based smart materials for printing technologies10.1002/admt.201800618 ↗
16. Highly sensitive and stretchable piezoresistive strain sensor based on conductive poly(styrene-butadiene-styrene)/few layer graphene composite fiber10.1016/j.compositesa.2017.11.027 ↗
17. Electro-mechanical properties of triblock copolymer styrene–butadiene–styrene/carbon nanotube composites for large deformation sensor applications10.1016/j.sna.2013.08.007 ↗
18. Piezoresistive response of extruded polyaniline/(styrene-butadiene-styrene) polymer blends for force and deformation sensors10.1016/j.matdes.2017.12.011 ↗
19. Review—recent progress in flexible and stretchable piezoresistive sensors and their applications10.1149/1945-7111/ab6828 ↗
20. Additively manufactured carbon fiber-reinforced composites: state of the art and perspective10.1016/j.addma.2019.100962 ↗
21. Printed wheatstone bridge with embedded polymer based piezoresistive sensors for strain sensing applications10.1016/j.addma.2018.01.004 ↗
22. A critical review of smart manufacturing & Industry 4.0 maturity models: implications for small and medium-sized enterprises (SMEs)10.1016/j.jmsy.2018.10.005 ↗
23. Graphene platforms for smart energy generation and storage10.1016/j.joule.2017.11.011 ↗
24. Theory, technology and applications of piezoresistive sensors: a review10.1016/j.sna.2018.07.006 ↗
25. Piezoresistive properties of cement-based sensors: review and perspective10.1016/j.conbuildmat.2019.01.081 ↗
26. A comprehensive evaluation of piezoresistive response and percolation behavior of multiscale polymer-based nanocomposites10.1016/j.compositesa.2019.105735 ↗
27. Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding10.1016/j.pmatsci.2019.02.003 ↗
28. Influence of processing parameters during ultrasound assisted extrusion on the properties of polycarbonate/carbon nanotubes composites10.1016/j.compscitech.2017.03.019 ↗
29. Toxicity of char residues produced in the co-pyrolysis of different wastes10.1016/j.wasman.2009.10.015 ↗
30. The reactions of dimethyl carbonate and its derivatives10.1039/c7gc01764b ↗
31. 2014
32. Smart piezoresistive tunnelling composite for flexible robotic sensing skin10.1088/0964-1726/22/12/125039 ↗
33. Piezoresistive performance of polymer-based materials as a function of the matrix and nanofiller content to walking detection application10.1016/j.compscitech.2019.107678 ↗
34. Preparation and microwave adsorption properties of core–shell structured barium titanate/polyaniline composite10.1016/j.jmmm.2012.11.010 ↗
35. Effect of surface pre-treatment on the behaviour of adhesively-bonded CFRP T-joints10.1016/j.engfailanal.2019.05.043 ↗
36. Wehrmann · 2001 · 7149
37. Systèmes · 2008
38. Tensile characterization of carbon nanotube-reinforced polymer composites at cryogenic temperatures: experimens and multiscale simulations10.2320/matertrans.MBW200817 ↗
39. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review10.1016/j.compositesa.2010.07.003 ↗
40. The effect of fibre length and fibre type on the fire performance of thermoplastic composites: the behaviour of polycarbonate as an example of a charring matrix10.1016/j.conbuildmat.2019.117889 ↗
41. Thermal transfer, interfacial, and mechanical properties of carbon fiber/polycarbonate-CNT composites using infrared thermography10.1016/j.polymertesting.2019.106247 ↗
42. Solution blending preparation of polycarbonate/graphene composite: boosting the mechanical and electrical properties10.1039/C6RA21962D ↗
43. Gamma-induced modifications of polycarbonate polymer10.1080/10420150412331330539 ↗
44. Polyvinyl chloride/polycarbonate blend ultrafiltration membranes for water treatment10.1016/j.memsci.2017.04.011 ↗
45. A facile strategy for functionalizing silica nanoparticles by polycarbonate degradation and its application in polymer nanocomposites10.1016/j.polymdegradstab.2015.06.006 ↗
46. Domain structures in nematic liquid crystals on a polycarbonate surface10.3390/ijms140816303 ↗
47. Using TGA/FTIR TGA/MS and cone calorimetry to understand thermal degradation and flame retardancy mechanism of polycarbonate filled with solid bisphenol A bis(diphenyl phosphate) and montmorillonite10.1016/j.polymdegradstab.2012.01.011 ↗
48. Enhanced interfacial interaction between polycarbonate and thermally reduced graphene induced by melt blending10.1016/j.compscitech.2013.07.007 ↗
49. A strategy for enhancement of mechanical and electrical properties of polycarbonate/multi-walled carbon nanotube composites10.1016/j.carbon.2008.12.043 ↗
50. A non-destructive experimental-cum-numerical methodology for the characterization of 3D-printed materials—polycarbonate-acrylonitrile butadiene styrene (PC-ABS)10.1016/j.mechmat.2019.03.005 ↗
51. 3D printing of bio-based polycarbonate and its potential applications in ecofriendly indoor manufacturing10.1016/j.addma.2019.100974 ↗
52. Polymeric composites for powder-based additive manufacturing: materials and applications10.1016/j.progpolymsci.2018.11.001 ↗
53. Electrical and vapor sensing behaviors of polycarbonate composites containing hybrid carbon fillers10.1016/j.eurpolymj.2018.09.027 ↗
54. Electrically conductive polycarbonate/carbon nanotube composites toughened with micron-scale voids10.1016/j.carbon.2014.10.062 ↗
55. On the mechanism of piezoresistivity of carbon nanotube polymer composites10.1016/j.polymer.2014.06.024 ↗
56. A theoretical study on the piezoresistive response of carbon nanotubes embedded in polymer nanocomposites in an elastic region10.1016/j.carbon.2017.05.059 ↗
57. Strain and damage sensing of polymer bonded mock energetics via piezoresistivity from carbon nanotube networks10.1088/1361-665X/ab3dcd ↗
58. Sensing skin for strain monitoring made of PC–CNT conductive polymer nanocomposite sprayed layer by layer10.1021/am300594t ↗