journal article·2021-10-01Open access

Innovative self-sensing fiber-reinforced cemented sand with hybrid CNT/GNP

Mohammadmahdi Abedi, Raul Fangueiro, António Gomes Correia

Smart Materials and Structures· Volume 30· Issue 10

Abstract

Abstract This study is a systematic attempt to develop a self-sensing fiber-reinforced cemented sand (CS) with high physical, mechanical, durability, and piezoresistivity performances. In this route, different concentrations of Dyneema, glass, and polypropylene (PP) fibers were incorporated into CS containing 0.17% hybrid carbon nanotubes and graphene nanoplatelets. The specimens were fabricated using the standard Proctor compaction method and tested at the optimum water content. The mechanical, microstructural, and durability performances of the specimens were evaluated through various types of tests. Further, the piezoresistivity of the specimens was evaluated under compression cyclic loads using the four probes method. The incorporation of 1.0% glass and Dyneema fiber as the optimum percent increased the unconfined compression strength (UCS) (29% and 82%, respectively) and the maximum dry density of the CS; however, reinforcing of the specimens with PP fiber at a concentration in the range of 0.5%–1.5% generally reduced the UCS of the specimens. The pullout test results exhibited a considerable interfacial performance for the Dyneema fiber. The CS reinforced with 1.0% Dyneema and glass fiber demonstrated a lower weight loss after 12 wetting and drying cycles compared to other specimens. The maximum gauge factors were also achieved for Dyneema fiber-reinforced CS. The outcomes of this study, balanced with sustainable issues, contribute to the development of the new era of smart structures, with applications to roller-compacted-concrete dams, rammed earth, and particularly in structural layers in transportation infrastructure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Smart Materials for Construction · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (82)

Show source-provided references
1. Structural health monitoring from fiber-reinforced composites to steel-reinforced concrete10.1088/0964-1726/10/3/318 ↗
2. A self-sensing carbon nanotube/cement composite for traffic monitoring10.1088/0957-4484/20/44/445501 ↗
3. An experimental study of self-sensing concrete enhanced with multi-wall carbon nanotubes in wedge splitting test and DIC10.1016/j.conbuildmat.2020.120871 ↗
4. Effects of carbon nanomaterial type and amount on self-sensing capacity of cement paste10.1016/j.measurement.2018.11.024 ↗
5. Electrical and piezoresistive sensing capacities of cement paste with multi-walled carbon nanotubes10.1016/j.acme.2017.09.007 ↗
6. Piezoresistivity of smart carbon nanotubes (CNTs) reinforced cementitious composite under integrated cyclic compression and impact10.1016/j.compstruct.2020.112106 ↗
7. Uniaxial compression in carbon fiber-reinforced cement, sensed by electrical resistivity measurement in longitudinal and transverse directions10.1016/S0008-8846(00)00438-5 ↗
8. Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing10.1016/j.cemconcomp.2012.04.007 ↗
9. Electrical and self-sensing properties of ultra-high-performance fiber-reinforced concrete with carbon nanotubes10.3390/s17112481 ↗
10. Ultra-sensitive affordable cementitious composite with high mechanical and microstructural performances by hybrid CNT/GNP10.3390/ma13163484 ↗
11. Micromechanics modeling of the uniaxial strain-sensing property of carbon nanotube cement-matrix composites for SHM applications10.1016/j.compstruct.2016.12.014 ↗
12. Cyclic heating and mechanical properties of CNT reinforced cement composite10.1016/j.compstruct.2020.113104 ↗
13. Self-monitoring of smart concrete column incorporating CNT/NCB composite fillers modified cementitious sensors10.1016/j.conbuildmat.2018.12.203 ↗
14. Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume10.1016/j.compstruct.2013.07.042 ↗
15. Carbon nanotube (CNT) incorporated cementitious composites for functional construction materials: the state of the art10.1016/j.compstruct.2019.111244 ↗
16. Sensing capabilities of carbon based TRC beam from slack to pull-out mechanism10.1016/j.compstruct.2017.08.102 ↗
17. Multifunctional material systems: a state-of-the-art review10.1016/j.compstruct.2016.01.028 ↗
18. Intrinsic self-sensing concrete and structures: a review10.1016/j.measurement.2014.09.048 ↗
19. Piezoresistive properties of cement-based sensors: review and perspective10.1016/j.conbuildmat.2019.01.081 ↗
20. Experimental study on use of nickel powder-filled Portland cement-based composite for fabrication of piezoresistive sensors with high sensitivity10.1016/j.sna.2008.10.001 ↗
21. Electrical and piezoresistive properties of cement composites with carbon nanomaterials10.1177/0021998318764809 ↗
22. A comparative study on the influences of CNT and GNP on the piezoresistivity of cement composites10.1016/j.matlet.2019.126858 ↗
23. Self-sensing and mechanical performance of CNT/GNP/UHMWPE biocompatible nanocomposites10.1007/s10853-018-2072-3 ↗
24. An effective method for hybrid CNT/GNP dispersion and its effects on the mechanical, microstructural, thermal, and electrical properties of multifunctional cementitious composites10.1155/2020/6749150 ↗
25. Large-scale deformation and damage detection of 3D printed continuous carbon fiber reinforced polymer-matrix composite structures10.1016/j.compstruct.2019.01.064 ↗
26. Mechanical performance of novel cement-based composites prepared with nano-fibres, and hybrid nano- and micro-fibres10.1016/j.compstruct.2017.06.045 ↗
27. Mechanical and damping properties of CNT-reinforced cementitious composites10.1016/j.compstruct.2016.10.043 ↗
28. Effects of graphene oxide on pore structure and mechanical properties of cementitious composites10.1016/j.compstruct.2019.111709 ↗
29. Influence of single-walled carbon nantotubes structure and density on the ductility of cement paste10.1016/j.conbuildmat.2018.03.244 ↗
30. Development of a novel multifunctional cementitious-based geocomposite by the contribution of CNT and GNP10.3390/nano11040961 ↗
31. A simple review of cemented non-conventional materials: soil composites10.1007/s10706-019-01090-x ↗
32. Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites10.1016/j.compstruct.2017.04.069 ↗
33. Compressive and flexural properties of ultra-high performance fiber-reinforced cementitious composite: the effect of coarse aggregate10.1016/j.compstruct.2019.111810 ↗
34. Laboratory investigation on the buckling restrained braces with an optimal percentage of microstructure, polypropylene and hybrid fibers under cyclic loads10.1016/j.compstruct.2018.07.035 ↗
35. Effect of material properties on the behaviour of sand—cement—fibre composites10.1680/grim.2004.8.2.77 ↗
36. Contaminant barrier material textural response to interaction with aqueous polymers10.1061/(ASCE)0899-1561(2004)16:3(265) ↗
37. Triaxial behavior of fiber-reinforced cemented sand10.1080/01694243.2015.1110073 ↗
38. Shear strength behaviour of polypropylene fibre reinforced cohesive soils10.1080/17486025.2013.804213 ↗
39. Variables controlling strength of fibre-reinforced cemented soils10.1680/grim.12.00004 ↗
40. Fibre-reinforced cemented soils compressive and tensile strength assessment as a function of filament length10.1016/j.geotexmem.2016.09.001 ↗
41. Inhibitors for alkali-glass reactions in glass fiber reinforced cement products10.1016/0010-4361(80)90086-5 ↗
42. Evaluation of CNT/GNP’s synergic effects on the mechanical, microstructural, and durability properties of a cementitious composite by the novel dispersion method10.1016/j.conbuildmat.2020.120486 ↗
43. Evaluation of mechanical properties of jet grouting columns using different test methods10.3233/978-1-60750-031-5-2169 ↗
44. Continuous stiffness assessment of cement-stabilised soils from early age10.1680/geot.13.P.021 ↗
45. Prediction of soil-cement mechanical properties by EC2 modified approach based on early age test results10.1061/9780784478547.004 ↗
46. Advanced tools and techniques to add value to soil stabilization practice10.1007/s41062-017-0084-5 ↗
47. Characterizing dispersion and long term stability of concentrated carbon nanotube aqueous suspensions for fabricating ductile cementitious composites10.1016/j.powtec.2016.11.010 ↗
48. Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique10.1016/j.cemconres.2015.03.006 ↗
49. The effects of fiber length and volume on material properties and crack resistance of basalt fiber reinforced concrete (BFRC)10.1155/2019/7520549 ↗
50. Effect of polypropylene fibres on the compressive and tensile strength of a soft soil, artificially stabilised with binders10.1016/j.geotexmem.2014.11.008 ↗
51. Mechanical properties of fiber-reinforced soil under triaxial compression and parameter determination based on the Duncan-Chang model10.3390/app10249043 ↗
52. A review on nanomaterial dispersion, microstructure, and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites10.1155/2013/710175 ↗
53. The characteristics of CNT/cement composites with acid-treated MWCNTs10.1155/2015/308725 ↗
54. Optimizing sonication parameters for dispersion of single-walled carbon nanotubes10.1016/j.chemphys.2012.08.020 ↗
55. Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion10.1016/j.ultsonch.2018.03.007 ↗
56. Treatments of polypropylene fibres to optimize their reinforcing efficiency in cement composites10.1016/0958-9465(92)90026-R ↗
57. Compositions for preparing cement-adhesive reinforcing fibres10.1016/0956-7143(90)90076-9 ↗
58. Glass fibres for cement reinforcement10.1098/rsta.1980.0051 ↗
59. Feasibility study of chemical treatments on sorghum fibres for compatibility enhancement in polypropylene composites10.4028/www.scientific.net/MSF.929.70 ↗
60. Reinforcing efficiency of micro and macro continuous polypropylene fibers in cementitious composites10.3390/app9112189 ↗
61. New design chart for geotechnical ground improvement: characterizing cement-stabilized sand10.1007/s11440-019-00838-2 ↗
62. Early strength development in cement-treated sand using low-carbon rapid-hardening cements10.1016/j.sandf.2018.07.001 ↗
63. Simultaneous effect of nano and micro silica on corrosion behaviour of reinforcement in concrete containing cement strength grade of C-52510.1016/j.promfg.2018.03.062 ↗
64. A special technique for determining the bond strength of micro-fibres in cement matrix by pullout test10.1007/BF00275353 ↗
65. Improved interfacial strength of SiO2 coated carbon fiber in cement matrix10.1016/j.cemconcomp.2018.04.007 ↗
66. Bond properties of micro-fibers in cementitious matrix10.1557/PROC-370-529 ↗
67. Compaction and shear strength characteristics of colemanite ore waste modified active belite cement stabilized high plasticity soils10.1016/j.enggeo.2013.01.003 ↗
68. Experimental investigation of the strength properties of sand–clay mixtures reinforced with randomly distributed discrete polypropylene fibers10.1680/gein.2009.16.5.354 ↗
69. On interface property characterization and performance of fiber reinforced cementitious composites
70. Bonding characteristics of multifilament polymer yarns and cement matrices10.1016/j.compositesa.2008.03.012 ↗
71. Graphene nanoplatelets as an effective additive to tune the microstructures and piezoresistive properties of cement-based composites10.1016/j.conbuildmat.2019.03.173 ↗
72. Multiple cracking in aligned polypropylene fibre reinforced cement composites10.1007/BF00552060 ↗
73. Importance of controlling the degree of saturation in soil compaction10.1016/j.proeng.2016.06.070 ↗
74. Progress in the functional modification of graphene/graphene oxide: a review10.1039/D0RA01068E ↗
75. Quantitative description of the pull-out behavior of crimped yarns from cement matrix10.1061/(ASCE)0899-1561(2003)15:6(537) ↗
76. Bentur · 2006 · 3110.4324/9780203088722 ↗
77. Engineering properties of soils reinforced by short discrete polypropylene fiber10.1061/(ASCE)MT.1943-5533.0000129 ↗
78. Split tensile strength of monofilament polypropylene fiber-reinforced cemented sandy soils10.1680/gein.2011.18.2.57 ↗
79. Mechanistic approach for fiber-reinforced flexible pavements10.1061/(ASCE)0733-947X(2008)134:1(15) ↗
80. A review of sustainable approaches in transport infrastructure geotechnics10.1016/j.trgeo.2016.03.003 ↗
81. How environmentally sustainable are fibre reinforced alkali-activated concretes?10.1016/j.jclepro.2019.07.076 ↗
82. Are natural fiber composites environmentally superior to glass fiber reinforced composites?10.1016/j.compositesa.2003.09.016 ↗